It's been posted ... https://bugzilla.kernel.org/show_bug.cgi?id=198675 Thanks again for your help here. Chris On 02/04/2018 03:10 PM, Pablo Sebastián Greco wrote: > Great!!!. > After you file the bug, please post back here for reference. > > Pablo. > > El 4/2/18 a las 16:56, Chris Szilagyi escribió: >> On 02/04/2018 01:07 PM, Pablo Sebastián Greco wrote: >> >> [SNIP] >> >>> If you copied the right .config, it shouldn't ask anything. Make >>> oldconfig just takes your current .config and asks for what is >>> missing (current as in copied to the root of your kernel build dir, >>> not as in "booted" version). >>> I have never done what you are doing, but I would do it this way: >>> 1) rpmbuild -bp kernel.spec so original patches are applied. >>> 2) copy current config from /boot to .config in your build environment >>> 3) apply the patch you want >>> 4) make oldconfig (should not ask a single question, since you >>> didn't activate anything) >>> 5) continue with your usual steps. >>> >>> HTH. >>> Pablo. >> >> That worked! Thanks so much. I followed your instructions and >> everything worked straight through this time. I did also need to >> copy Module.symvers from the source from the kernel-devel package to >> the build directory, but your solution did the trick. The module >> compiled and everything is working now with the Hauppauge device! >> >> I will also submit a bug as suggested as well, in case this can help >> others, too. >> >> Chris >> _______________________________________________ >> Arm-dev mailing list >> Arm-dev at centos.org >> https://lists.centos.org/mailman/listinfo/arm-dev