ma, 2008-07-14 kello 06:07 -0700, Akemi Yagi kirjoitti: > On Mon, Jul 14, 2008 at 5:58 AM, Antti J. Huhtala <ahuhtal4 at welho.com> wrote: > > ma, 2008-07-14 kello 12:20 +0100, Alan Bartlett kirjoitti: > > > Now I'm testing your "I Need to Build a Custom Kernel" HowTo. Everything > > seems to be OK in the HowTo, even if the final build fails with an error > > "Makefile:405: /home/andie/rpmbuild/BUILD/kernel-2.6.18/\ > > linux-2.6.18.i686/arch//Makefile: No such file or directory". > > This is most likely because you missed the step of adding the # i386 > (or #x86_64) line. Could you check this out? > > Akemi You are exactly right, Akemi, thanks. I did not add it to the original .config because it was there already. However, after copying the file back and forth a couple of times it seems to be missing now. So it must be added there just before final "rpmbuild -bb ..." command? The "#i386" line is still in .config.old but that probably isn't very helpful at all... I'll try again later this evening. Thanks again! Antti