Hi Carl, First off thanks for the guide, overall it made things quite easy for me. As fro my ifcfg file for the interface, the didn't exist before I created while following the how-to. So at first I just had ONBOOT="yes" After some googling in attempts to fix my issue I modified it to have: TYPE=Wireless WPA=yes ONBOOT="yes" HWADDR=5C:D9:98:C2:0F:BD None of these fixed my issue and that is when I changed the line in the prepnet init script. I changed the prepnet init script back to killall dhclient and then added the BOOTPROTO and this didn't have the desired affect. After that I copied your entire ifcfg file for my interface, excluding the UUID because I wasn't sure how to determine what mine was and just modified the HWADDR to match my MAC address. This seems to have worked. I'm not sure which setting(s) were the ones that got it up and running. If it isn't glaringly obvious let me know and I can experiment and try to determine what exactly I was missing from the file. Thanks for the assistance. Dan On Thu, Jun 6, 2013 at 4:49 AM, Carl T. Miller <carl at carltm.com> wrote: > On 06/06/2013 01:13 AM, Dan King wrote: > > Anyways, when going through this I was having issues because everything > > seemed to work but I was never getting an IP address when the system > > booted up. > > > > After lots of looking at this and working at understanding what > > everything does I found the that prepnet startup script was killing > > dhclient using this command: > > > > killall dhclient >/dev/null 2>&1. > > > > I first attempted to remove this and after that didn't work I simply > > changed the line to call dhclient instead. Making this change seems to > > have solved my issues. > > I wrote the guide, and I put the killall command there because > dhclient sometimes failed when I restarted the network service. > I double-checked everything, and the wiki page shows exactly how > I have it configured on my laptop. Could you post the contents > of your ifcfg file for this interface? In my example below the > bootproto is set to dhcp, which starts the dhclient program when > the interface is brought up. > > c > > > > DEVICE="wlan0" > BOOTPROTO="dhcp" > IPV6INIT="yes" > IPV6_AUTOCONF="yes" > NM_CONTROLLED="no" > ONBOOT="yes" > TYPE="Ethernet" > UUID="609ad8d9-785e-4508-978a-552b9a3bda7e" > HWADDR=08:3E:8E:B9:8C:7B > DEFROUTE=yes > PEERDNS=yes > PEERROUTES=yes > IPV4_FAILURE_FATAL=yes > IPV6_DEFROUTE=yes > IPV6_PEERDNS=yes > IPV6_PEERROUTES=yes > IPV6_FAILURE_FATAL=no > NAME="System wlan0" > > _______________________________________________ > CentOS-docs mailing list > CentOS-docs at centos.org > http://lists.centos.org/mailman/listinfo/centos-docs > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos-docs/attachments/20130606/cfb8f71d/attachment-0006.html>