[CentOS-es] ayudar servidor se me apaga

Aldo Rivadeneira aldo.rivadeneira en gmail.com
Vie Feb 27 15:36:47 UTC 2015


Lo único que puedo detectar es que activaron IPv6 y eso requiere de un
reinicio de sistema para que lo tome activo.
El segundo detalle es el raid no se si te este causando problemas la
controladora seria cosa de validar si actualizaron el kernel y exista un
problema con ello.

Como comentan seria cosa de probar :
Validar por partes el kernel y si es algo físico.

Probar si es el caso con el kernel anterior.

Actualizar kernel nuevamente.

Actualizar firmware de la controladora RAID.

Saludos,



On Wednesday, January 7, 2015, Guillermo Henríquez <guillermomagno en gmail.com>
wrote:

> Amigos:
>
> Necesito ayuda, un servidor se me apaga, con el mensaje  shutting down for
> system halt y luego al arrancalo muestra el sig. log:
>
>
> kernel: Linux version 2.6.18-348.1.1.el5 (mockbuild en builder10.centos.org
> <javascript:;>)
> (gcc version 4.1.2 20080704 (Red Hat 4.1.2-54)) #1 SMP Tue Jan 22 16:19:19
> EST 2013
> kernel: Command line: ro root=/dev/md2
> kernel: BIOS-provided physical RAM map:
> kernel:  BIOS-e820: 0000000000010000 - 0000000000093800 (usable)
> kernel:  BIOS-e820: 0000000000093800 - 0000000000093c00 (reserved)
> kernel:  BIOS-e820: 0000000000098000 - 00000000000a0000 (reserved)
> kernel:  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> kernel:  BIOS-e820: 0000000000100000 - 000000007d7d4000 (usable)
> kernel:  BIOS-e820: 000000007d7d4000 - 000000007d7de000 (ACPI data)
> kernel:  BIOS-e820: 000000007d7de000 - 000000007d7df000 (usable)
> kernel:  BIOS-e820: 000000007d7df000 - 0000000080000000 (reserved)
> kernel:  BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
> kernel:  BIOS-e820: 00000000fec00000 - 00000000fee10000 (reserved)
> kernel:  BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
> kernel: DMI 2.7 present.
> kernel: No NUMA configuration found
> kernel: Faking a node at 0000000000000000-000000007d7df000
> kernel: Bootmem setup node 0 0000000000000000-000000007d7df000
> kernel: Memory for crash kernel (0x0 to 0x0) notwithin permissible range
> kernel: disabling kdump
> kernel: ACPI: PM-Timer IO Port: 0x908
> kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> kernel: Processor #0 7:10 APIC version 21
> kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> kernel: Processor #2 7:10 APIC version 21
> kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
> kernel: Processor #4 7:10 APIC version 21
> kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
> kernel: Processor #6 7:10 APIC version 21
> kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
> last message repeated 59 times
> kernel: ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
> kernel: ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
> kernel: IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
> kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
> kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> kernel: Setting APIC routing to physical flat
> kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000
> kernel: Using ACPI (MADT) for SMP configuration information
> kernel: Nosave address range: 0000000000093000 - 0000000000094000
> kernel: Nosave address range: 0000000000093000 - 0000000000098000
> kernel: Nosave address range: 0000000000098000 - 00000000000a0000
> kernel: Nosave address range: 00000000000a0000 - 00000000000f0000
> kernel: Nosave address range: 00000000000f0000 - 0000000000100000
> kernel: Nosave address range: 000000007d7d4000 - 000000007d7de000
> kernel: Allocating PCI resources starting at 88000000 (gap:
> 80000000:74000000)
> kernel: SMP: Allowing 64 CPUs, 60 hotplug CPUs
> kernel: Built 1 zonelists.  Total pages: 505346
> kernel: Kernel command line: ro root=/dev/md2
> kernel: Initializing CPU#0
> kernel: PID hash table entries: 4096 (order: 12, 32768 bytes)
> kernel: Console: colour VGA+ 80x25
> kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
> kernel: Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
> kernel: Checking aperture...
> kernel: Memory: 2012576k/2056060k available (2627k kernel code, 42944k
> reserved, 1677k data, 224k init)
> kernel: Calibrating delay loop (skipped), value calculated using timer
> frequency.. 6186.24 BogoMIPS (lpj=3093121)
> kernel: Security Framework v1.0.0 initialized
> kernel: SELinux:  Initializing.
> kernel: selinux_register_security:  Registering secondary module capability
> kernel: Capability LSM initialized as secondary
> kernel: Mount-cache hash table entries: 256
> kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
> kernel: CPU: L2 cache: 256K
> kernel: CPU: L3 cache: 8192K
> kernel: using mwait in idle threads.
> kernel: CPU: Physical Processor ID: 0
> kernel: CPU: Processor Core ID: 0
> kernel: MCE: Machine Check Exception Reporting is disabled.
> kernel: SMP alternatives: switching to UP code
> kernel: ACPI: Core revision 20060707
> kernel: Using local APIC timer interrupts.
> kernel: Detected 6.236 MHz APIC timer.
> kernel: SMP alternatives: switching to SMP code
> kernel: Booting processor 1/4 APIC 0x2
> kernel: Initializing CPU#1
> kernel: Calibrating delay using timer specific routine.. 6185.87 BogoMIPS
> (lpj=3092938)
> kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
> kernel: CPU: L2 cache: 256K
> kernel: CPU: L3 cache: 8192K
> kernel: CPU: Physical Processor ID: 0
> kernel: CPU: Processor Core ID: 1
> kernel:       Intel(R) Xeon(R) CPU E3-1220 V2 @ 3.10GHz stepping 09
> kernel: SMP alternatives: switching to SMP code
> kernel: Booting processor 2/4 APIC 0x4
> kernel: Initializing CPU#2
> kernel: Calibrating delay using timer specific routine.. 6185.88 BogoMIPS
> (lpj=3092941)
> kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
> kernel: CPU: L2 cache: 256K
> kernel: CPU: L3 cache: 8192K
> kernel: CPU: Physical Processor ID: 0
> kernel: CPU: Processor Core ID: 2
> kernel:       Intel(R) Xeon(R) CPU E3-1220 V2 @ 3.10GHz stepping 09
> kernel: SMP alternatives: switching to SMP code
> kernel: Booting processor 3/4 APIC 0x6
> kernel: Initializing CPU#3
> kernel: Calibrating delay using timer specific routine.. 6185.86 BogoMIPS
> (lpj=3092932)
> kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
> kernel: CPU: L2 cache: 256K
> kernel: CPU: L3 cache: 8192K
> kernel: CPU: Physical Processor ID: 0
> kernel: CPU: Processor Core ID: 3
> kernel:       Intel(R) Xeon(R) CPU E3-1220 V2 @ 3.10GHz stepping 09
> kernel: Brought up 4 CPUs
> kernel: NMI watchdog testing PASSED.
> kernel: time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
> kernel: time.c: Detected 3093.121 MHz processor.
> kernel: migration_cost=23
> kernel: checking if image is initramfs... it is
> kernel: Freeing initrd memory: 2693k freed
> kernel: NET: Registered protocol family 16
> kernel: ACPI: bus type pci registered
> kernel: Warning: pci_mmcfg_init marking 256MB space uncacheable.
> kernel: MCFG table requires 64MB uncacheable only. Try booting with
> acpi_mcfg_max_pci_bus_num=on
> kernel: PCI: Using MMCONFIG at f4000000
> kernel: ACPI: Interpreter enabled
> kernel: ACPI: Using IOAPIC for interrupt routing
> kernel: ACPI: No dock devices found.
> kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
> kernel: pci 0000:00:1c.0: PCI bridge to [bus 0a-0a]
> kernel: pci 0000:00:1c.4: PCI bridge to [bus 02-02]
> kernel: pci 0000:00:1c.7: PCI bridge to [bus 01-01]
> kernel: pci 0000:00:1e.0: PCI bridge to [bus 13-13] (subtractive decode)
> kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11)
> kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11)
> kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11) *0, disabled.
> kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
> kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11)
> kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 11) *4
> kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 10 11) *0, disabled.
> kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 11) *0, disabled.
> kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
> kernel: pnp: PnP ACPI init
> kernel: pnp: PnP ACPI: found 10 devices
> kernel: usbcore: registered new driver usbfs
> kernel: usbcore: registered new driver hub
> kernel: PCI: Using ACPI for IRQ routing
> kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps,
> post a report
> kernel: NetLabel: Initializing
> kernel: NetLabel:  domain hash size = 128
> kernel: NetLabel:  protocols = UNLABELED CIPSOv4
> kernel: NetLabel:  unlabeled traffic allowed by default
> kernel: hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8,
> 0, 0, 0, 0, 0, 0
> kernel: hpet0: 8 64-bit timers, 14318180 Hz
> kernel: DMAR:Host address width 39
> kernel: DMAR:DRHD base: 0x000000fed90000 flags: 0x1
> kernel: IOMMU fed90000: ver 1:0 cap c9008020660262 ecap f010da
> kernel: DMAR:RMRR base: 0x0000007dffd000 end: 0x0000007dffffff
> kernel: DMAR:No ATSR found
> kernel: PCI-GART: No AMD northbridge found.
> kernel: system 00:01: ioport range 0x408-0x40f has been reserved
> kernel: system 00:01: ioport range 0x4d0-0x4d1 has been reserved
> kernel: system 00:01: ioport range 0x310-0x313 has been reserved
> kernel: system 00:01: iomem range 0xf4000000-0xf7ffffff has been reserved
> kernel: system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
> kernel: system 00:01: iomem range 0xfed90000-0xfed91fff has been reserved
> kernel: pci 0000:00:1c.0: PCI bridge to [bus 0a-0a]
> kernel: pci 0000:00:1c.0:   bridge window [io  disabled]
> kernel: pci 0000:00:1c.0:   bridge window [mem disabled]
> kernel: pci 0000:00:1c.0:   bridge window [mem pref disabled]
> kernel: pci 0000:00:1c.4: PCI bridge to [bus 02-02]
> kernel: pci 0000:00:1c.4:   bridge window [io  0x4000-0x4fff]
> kernel: pci 0000:00:1c.4:   bridge window [mem 0xfbf00000-0xfbffffff]
> kernel: pci 0000:00:1c.4:   bridge window [mem pref disabled]
> kernel: pci 0000:01:00.2: BAR 6: assigned [mem 0xfad00000-0xfad0ffff pref]
> kernel: pci 0000:00:1c.7: PCI bridge to [bus 01-01]
> kernel: pci 0000:00:1c.7:   bridge window [io  0x2000-0x3fff]
> kernel: pci 0000:00:1c.7:   bridge window [mem 0xfad00000-0xfbefffff]
> kernel: pci 0000:00:1c.7:   bridge window [mem 0xf9000000-0xf9ffffff 64bit
> pref]
> kernel: pci 0000:00:1e.0: PCI bridge to [bus 13-13]
> kernel: pci 0000:00:1e.0:   bridge window [io  disabled]
> kernel: pci 0000:00:1e.0:   bridge window [mem disabled]
> rpc.statd[2187]: Version 1.0.9 Starting
> kernel: pci 0000:00:1e.0:   bridge window [mem pref disabled]
> kernel: GSI 16 sharing vector 0xA9 and IRQ 16
> kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ
> 169
> kernel: ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ
> 169
> kernel: GSI 17 sharing vector 0xB1 and IRQ 17
> kernel: ACPI: PCI Interrupt 0000:00:1c.7[D] -> GSI 19 (level, low) -> IRQ
> 177
> kernel: NET: Registered protocol family 2
> kernel: IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
> kernel: TCP established hash table entries: 262144 (order: 10, 4194304
> bytes)
> kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> kernel: TCP: Hash tables configured (established 262144 bind 65536)
> kernel: TCP reno registered
> kernel: audit: initializing netlink socket (disabled)
> kernel: type=2000 audit(1420618613.662:1): initialized
> kernel: Total HugeTLB memory allocated, 0
> kernel: VFS: Disk quotas dquot_6.5.1
> kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> kernel: Initializing Cryptographic API
> kernel: alg: No test for crc32c (crc32c-generic)
> kernel: ksign: Installing public key data
> kernel: Loading keyring
> kernel: - Added public key B69F0AC84A59E856
> kernel: - User ID: CentOS (Kernel Module GPG key)
> kernel: io scheduler noop registered
> kernel: io scheduler anticipatory registered
> kernel: io scheduler deadline registered
> kernel: io scheduler cfq registered (default)
> kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> kernel: ACPI: CPU0 (power states: C1[C1] C2[C2])
> kernel: ACPI: CPU1 (power states: C1[C1] C2[C2])
> kernel: ACPI: CPU2 (power states: C1[C1] C2[C2])
> kernel: ACPI: CPU3 (power states: C1[C1] C2[C2])
> kernel: ACPI: Thermal Zone [THM0] (8 C)
> kernel: Real Time Clock Driver v1.12ac
> kernel: Non-volatile memory driver v1.2
> kernel: Linux agpgart interface v0.101 (c) Dave Jones
> kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
> enabled
> kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> kernel: brd: module loaded
> kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx
> kernel: ide-floppy driver 0.99.newide
> kernel: usbcore: registered new driver hiddev
> kernel: usbcore: registered new driver usbhid
> kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> kernel: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq
> 1,12
> kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
> kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
> kernel: mice: PS/2 mouse device common for all mice
> kernel: md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
> kernel: md: bitmap version 4.39
> kernel: TCP bic registered
> kernel: Initializing IPsec netlink socket
> kernel: NET: Registered protocol family 1
> kernel: NET: Registered protocol family 17
> kernel: ACPI: (supports S0 S4 S5)
> kernel: Initalizing network drop monitor service
> kernel: Freeing unused kernel memory: 224k freed
> kernel: Write protecting the kernel read-only data: 533k
> kernel: input: AT Translated Set 2 keyboard as /class/input/input0
> kernel: GSI 18 sharing vector 0xD9 and IRQ 18
> kernel: ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 21 (level, low) -> IRQ
> 217
> kernel: ehci_hcd 0000:00:1a.0: EHCI Host Controller
> kernel: ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number
> 1
> kernel: ehci_hcd 0000:00:1a.0: debug port 2
> kernel: ehci_hcd 0000:00:1a.0: irq 217, io mem 0xfacd0000
> kernel: ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00, driver 10 Dec
> 2004
> kernel: usb usb1: configuration #1 chosen from 1 choice
> kernel: hub 1-0:1.0: USB hub found
> kernel: hub 1-0:1.0: 2 ports detected
> kernel: GSI 19 sharing vector 0xE1 and IRQ 19
> kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ
> 225
> kernel: ehci_hcd 0000:00:1d.0: EHCI Host Controller
> kernel: ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number
> 2
> kernel: ehci_hcd 0000:00:1d.0: debug port 2
> kernel: ehci_hcd 0000:00:1d.0: irq 225, io mem 0xfacc0000
> kernel: ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00, driver 10 Dec
> 2004
> kernel: usb usb2: configuration #1 chosen from 1 choice
> kernel: hub 2-0:1.0: USB hub found
> kernel: hub 2-0:1.0: 2 ports detected
> kernel: USB Universal Host Controller Interface driver v3.0
> kernel: ACPI: PCI Interrupt 0000:01:00.4[B] -> GSI 16 (level, low) -> IRQ
> 169
> kernel: uhci_hcd 0000:01:00.4: UHCI Host Controller
> kernel: uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus number
> 3
> kernel: uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports
> kernel: uhci_hcd 0000:01:00.4: irq 169, io base 0x00002000
> kernel: usb usb3: configuration #1 chosen from 1 choice
> kernel: hub 3-0:1.0: USB hub found
> kernel: hub 3-0:1.0: 2 ports detected
> kernel: usb 1-1: new high speed USB device using ehci_hcd and address 2
> kernel: md: raid1 personality registered for level 1
> kernel: SCSI subsystem initialized
> kernel: GSI 20 sharing vector 0xE9 and IRQ 20
> kernel: ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ
> 233
> kernel: usb 1-1: configuration #1 chosen from 1 choice
> kernel: hub 1-1:1.0: USB hub found
> kernel: hub 1-1:1.0: 6 ports detected
> kernel: usb 2-1: new high speed USB device using ehci_hcd and address 2
> kernel: usb 2-1: configuration #1 chosen from 1 choice
> kernel: hub 2-1:1.0: USB hub found
> kernel: hub 2-1:1.0: 6 ports detected
> kernel: usb usb3: Controller not stopped yet!
> kernel: ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl
> SATA mode
> kernel: ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp
> pio slum part ems
> kernel: scsi0 : ahci
> kernel: scsi1 : ahci
> kernel: scsi2 : ahci
> kernel: scsi3 : ahci
> kernel: scsi4 : ahci
> kernel: scsi5 : ahci
> kernel: ata1: SATA max UDMA/133 abar m2048 en 0xfacb0000 port 0xfacb0100 irq
> 50
> kernel: ata2: SATA max UDMA/133 abar m2048 en 0xfacb0000 port 0xfacb0180 irq
> 50
> kernel: ata3: SATA max UDMA/133 abar m2048 en 0xfacb0000 port 0xfacb0200 irq
> 50
> kernel: ata4: SATA max UDMA/133 abar m2048 en 0xfacb0000 port 0xfacb0280 irq
> 50
> kernel: ata5: SATA max UDMA/133 abar m2048 en 0xfacb0000 port 0xfacb0300 irq
> 50
> kernel: ata6: SATA max UDMA/133 abar m2048 en 0xfacb0000 port 0xfacb0380 irq
> 50
> kernel: ata1: SATA link down (SStatus 0 SControl 300)
> kernel: ata2: SATA link down (SStatus 0 SControl 300)
> kernel: ata3: SATA link down (SStatus 0 SControl 300)
> kernel: ata4: SATA link down (SStatus 0 SControl 300)
> kernel: ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> kernel: ata5.00: ATA-8: MB1000GCEHH, HPGD, max UDMA/133
> kernel: ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> kernel: ata5.00: configured for UDMA/133
> kernel: ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> kernel: ata6.00: ATA-8: MB1000GCEHH, HPGD, max UDMA/133
> kernel: ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> kernel: ata6.00: configured for UDMA/133
> kernel:   Vendor: ATA       Model: MB1000GCEHH       Rev: HPGD
> kernel:   Type:   Direct-Access                      ANSI SCSI revision: 05
> kernel: SCSI device sda: 1953525168 512-byte hdwr sectors (1000205 MB)
> kernel: sda: Write Protect is off
> kernel: SCSI device sda: drive cache: write back
> kernel: SCSI device sda: 1953525168 512-byte hdwr sectors (1000205 MB)
> kernel: sda: Write Protect is off
> kernel: SCSI device sda: drive cache: write back
> kernel:  sda: sda1 sda2 sda3
> kernel: sd 4:0:0:0: Attached scsi disk sda
> kernel:   Vendor: ATA       Model: MB1000GCEHH       Rev: HPGD
> kernel:   Type:   Direct-Access                      ANSI SCSI revision: 05
> kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB)
> kernel: sdb: Write Protect is off
> kernel: SCSI device sdb: drive cache: write back
> kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB)
> kernel: sdb: Write Protect is off
> kernel: SCSI device sdb: drive cache: write back
> kernel:  sdb: sdb1 sdb2 sdb3
> kernel: sd 5:0:0:0: Attached scsi disk sdb
> kernel: md: raid0 personality registered for level 0
> kernel: Initializing USB Mass Storage driver...
> kernel: usbcore: registered new driver usb-storage
> kernel: USB Mass Storage support registered.
> kernel: device-mapper: uevent: version 1.0.3
> kernel: device-mapper: ioctl: 4.11.6-ioctl (2011-02-18) initialised:
> dm-devel en redhat.com <javascript:;>
> kernel: device-mapper: dm-raid45: initialized v0.2594l
> kernel: md: Autodetecting RAID arrays.
> kernel: md: autorun ...
> kernel: md: considering sdb3 ...
> kernel: md:  adding sdb3 ...
> kernel: md: sdb2 has different UUID to sdb3
> kernel: md: sdb1 has different UUID to sdb3
> kernel: md:  adding sda3 ...
> kernel: md: sda2 has different UUID to sdb3
> kernel: md: sda1 has different UUID to sdb3
> kernel: md: created md2
> kernel: md: bind<sda3>
> kernel: md: bind<sdb3>
> kernel: md: running: <sdb3><sda3>
> kernel: raid1: raid set md2 active with 2 out of 2 mirrors
> kernel: md: considering sdb2 ...
> kernel: md:  adding sdb2 ...
> kernel: md: sdb1 has different UUID to sdb2
> kernel: md:  adding sda2 ...
> kernel: md: sda1 has different UUID to sdb2
> kernel: md: created md0
> kernel: md: bind<sda2>
> kernel: md: bind<sdb2>
> kernel: md: running: <sdb2><sda2>
> kernel: md0: setting max_sectors to 512, segment boundary to 131071
> kernel: raid0: looking at sdb2
> kernel: raid0:   comparing sdb2(2096384) with sdb2(2096384)
> kernel: raid0:   END
> kernel: raid0:   ==> UNIQUE
> kernel: raid0: 1 zones
> kernel: raid0: looking at sda2
> kernel: raid0:   comparing sda2(2096384) with sdb2(2096384)
> kernel: raid0:   EQUAL
> kernel: raid0: FINAL 1 zones
> kernel: raid0: done.
> kernel: raid0 : md_size is 4192768 blocks.
> kernel: raid0 : conf->hash_spacing is 4192768 blocks.
> kernel: raid0 : nb_zone is 1.
> kernel: raid0 : Allocating 8 bytes for hash.
> kernel: md: considering sdb1 ...
> kernel: md:  adding sdb1 ...
> kernel: md:  adding sda1 ...
> kernel: md: created md1
> kernel: md: bind<sda1>
> kernel: md: bind<sdb1>
> kernel: md: running: <sdb1><sda1>
> kernel: raid1: raid set md1 active with 2 out of 2 mirrors
> kernel: md: ... autorun DONE.
> kernel: md: Autodetecting RAID arrays.
> kernel: md: autorun ...
> kernel: md: ... autorun DONE.
> kernel: kjournald starting.  Commit interval 5 seconds
> kernel: EXT3-fs: mounted filesystem with ordered data mode.
> kernel: SELinux:  Disabled at runtime.
> kernel: type=1404 audit(1420618647.375:2): selinux=0 auid=4294967295
> ses=4294967295
> kernel: input: PC Speaker as /class/input/input1
> kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> kernel: ACPI: PCI Interrupt 0000:01:00.2[B] -> GSI 16 (level, low) -> IRQ
> 169
> kernel: e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
> kernel: e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
> kernel: e1000e 0000:02:00.0: Disabling ASPM L0s L1
> kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ
> 169
> kernel: e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to
> dynamic conservative mode
> kernel: Floppy drive(s): fd0 is 1.44M
> kernel: sd 4:0:0:0: Attached scsi generic sg0 type 0
> kernel: sd 5:0:0:0: Attached scsi generic sg1 type 0
> kernel: e1000e 0000:02:00.0: eth0: (PCI Express:2.5GT/s:Width x1)
> 38:ea:a7:aa:8a:32
> kernel: e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
> kernel: e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
> kernel: floppy0: no floppy controllers found
> kernel: work still pending
> kernel: Floppy drive(s): fd0 is 1.44M
> kernel: floppy0: no floppy controllers found
> kernel: work still pending
> kernel: lp: driver loaded but no devices found
> kernel: ACPI: Power Button (FF) [PWRF]
> kernel: ACPI: Mapper loaded
> kernel: dell-wmi: No known WMI GUID found
> kernel: md: Autodetecting RAID arrays.
> kernel: md: autorun ...
> kernel: md: ... autorun DONE.
> kernel: device-mapper: multipath: version 1.0.6 loaded
> kernel: EXT3 FS on md2, internal journal
> kernel: kjournald starting.  Commit interval 5 seconds
> kernel: EXT3 FS on md1, internal journal
> kernel: EXT3-fs: mounted filesystem with ordered data mode.
> kernel: Adding 4192760k swap on /dev/md0.  Priority:-1 extents:1
> across:4192760k
> kernel: Loading iSCSI transport class v2.0-871.
> kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb en candelatech.com
> <javascript:;>>
> kernel: All bugs added by David S. Miller <davem en redhat.com <javascript:;>
> >
> kernel: libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4
> bits.
> kernel: libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
> kernel: Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
> kernel: iscsi: registered transport (cxgb3i)
> kernel: IPv6: Loaded, but administratively disabled, reboot required to
> enable
> kernel: cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.12 (June 29,
> 2012)
> kernel: Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.2.2 (Jun 18, 2012)
> kernel: iscsi: registered transport (bnx2i)
> kernel: iscsi: registered transport (tcp)
> kernel: iscsi: registered transport (iser)
> kernel: iscsi: registered transport (be2iscsi)
> kernel: 8021q: adding VLAN 0 to HW filter on device eth0
> kernel: e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
> ntpd[2452]: ntpd 4.2.2p1 en 1.1570-o Fri Nov 18 13:21:21 UTC 2011 (1)
> ntpd[2453]: precision = 1.000 usec
> ntpd[2453]: Listening on interface wildcard, 0.0.0.0#123 Disabled
> ntpd[2453]: Listening on interface lo, 127.0.0.1#123 Enabled
> ntpd[2453]: Listening on interface eth0, 178.18.69.1#123 Enabled
> ntpd[2453]: kernel time sync status 0040
> ntpd[2453]: getaddrinfo: "::1" invalid host address, ignored
> xinetd[2437]: xinetd Version 2.3.14 started with libwrap loadavg
> labeled-networking options compiled in.
> xinetd[2437]: Started working: 1 available service
> FaxQueuer[2970]: HylaFAX (tm) Version 4.3.10
> FaxQueuer[2970]: Copyright (c) 1990-1996 Sam Leffler
> FaxQueuer[2970]: Copyright (c) 1991-1996 Silicon Graphics, Inc.
> HylaFAX[2973]: HylaFAX INET Protocol Server: restarted.
> saslauthd[3001]: detach_tty      : master pid is: 3001
> saslauthd[3001]: ipc_init        : listening on socket:
> /var/run/saslauthd/mux
> ntpd[2453]: frequency initialized 8.527 PPM from /var/lib/ntp/drift
> ntpd[2453]: synchronized to 200.27.106.115, stratum 1
> ntpd[2453]: kernel time sync enabled 0001
> _______________________________________________
> CentOS-es mailing list
> CentOS-es en centos.org <javascript:;>
> http://lists.centos.org/mailman/listinfo/centos-es
>


-- 
Aldo Rivadeneira Reyna


Más información sobre la lista de distribución CentOS-es