[CentOS-es] ayudar servidor se me apaga

José Luis Respeto Alvarez joseluisrespeto en gmail.com
Vie Feb 27 17:17:55 UTC 2015


Suena a topico pero desactiva selinux!
El 27/02/2015 16:42, "Aldo Rivadeneira" <aldo.rivadeneira en gmail.com>
escribió:

> Lo único que puedo detectar es que activaron IPv6 y eso requiere de un
> reinicio de sistema para que lo tome activo.
> El segundo detalle es el raid no se si te este causando problemas la
> controladora seria cosa de validar si actualizaron el kernel y exista un
> problema con ello.
>
> Como comentan seria cosa de probar :
> Validar por partes el kernel y si es algo físico.
>
> Probar si es el caso con el kernel anterior.
>
> Actualizar kernel nuevamente.
>
> Actualizar firmware de la controladora RAID.
>
> Saludos,
>
>
>
> On Wednesday, January 7, 2015, Guillermo Henríquez <
> guillermomagno en gmail.com>
> wrote:
>
> > Amigos:
> >
> > Necesito ayuda, un servidor se me apaga, con el mensaje  shutting down
> for
> > system halt y luego al arrancalo muestra el sig. log:
> >
> >
> > kernel: Linux version 2.6.18-348.1.1.el5 (mockbuild en builder10.centos.org
> > <javascript:;>)
> > (gcc version 4.1.2 20080704 (Red Hat 4.1.2-54)) #1 SMP Tue Jan 22
> 16:19:19
> > EST 2013
> > kernel: Command line: ro root=/dev/md2
> > kernel: BIOS-provided physical RAM map:
> > kernel:  BIOS-e820: 0000000000010000 - 0000000000093800 (usable)
> > kernel:  BIOS-e820: 0000000000093800 - 0000000000093c00 (reserved)
> > kernel:  BIOS-e820: 0000000000098000 - 00000000000a0000 (reserved)
> > kernel:  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> > kernel:  BIOS-e820: 0000000000100000 - 000000007d7d4000 (usable)
> > kernel:  BIOS-e820: 000000007d7d4000 - 000000007d7de000 (ACPI data)
> > kernel:  BIOS-e820: 000000007d7de000 - 000000007d7df000 (usable)
> > kernel:  BIOS-e820: 000000007d7df000 - 0000000080000000 (reserved)
> > kernel:  BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
> > kernel:  BIOS-e820: 00000000fec00000 - 00000000fee10000 (reserved)
> > kernel:  BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
> > kernel: DMI 2.7 present.
> > kernel: No NUMA configuration found
> > kernel: Faking a node at 0000000000000000-000000007d7df000
> > kernel: Bootmem setup node 0 0000000000000000-000000007d7df000
> > kernel: Memory for crash kernel (0x0 to 0x0) notwithin permissible range
> > kernel: disabling kdump
> > kernel: ACPI: PM-Timer IO Port: 0x908
> > kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> > kernel: Processor #0 7:10 APIC version 21
> > kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> > kernel: Processor #2 7:10 APIC version 21
> > kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
> > kernel: Processor #4 7:10 APIC version 21
> > kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
> > kernel: Processor #6 7:10 APIC version 21
> > kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
> > last message repeated 59 times
> > kernel: ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
> > kernel: ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
> > kernel: IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
> > kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
> > kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> > kernel: Setting APIC routing to physical flat
> > kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000
> > kernel: Using ACPI (MADT) for SMP configuration information
> > kernel: Nosave address range: 0000000000093000 - 0000000000094000
> > kernel: Nosave address range: 0000000000093000 - 0000000000098000
> > kernel: Nosave address range: 0000000000098000 - 00000000000a0000
> > kernel: Nosave address range: 00000000000a0000 - 00000000000f0000
> > kernel: Nosave address range: 00000000000f0000 - 0000000000100000
> > kernel: Nosave address range: 000000007d7d4000 - 000000007d7de000
> > kernel: Allocating PCI resources starting at 88000000 (gap:
> > 80000000:74000000)
> > kernel: SMP: Allowing 64 CPUs, 60 hotplug CPUs
> > kernel: Built 1 zonelists.  Total pages: 505346
> > kernel: Kernel command line: ro root=/dev/md2
> > kernel: Initializing CPU#0
> > kernel: PID hash table entries: 4096 (order: 12, 32768 bytes)
> > kernel: Console: colour VGA+ 80x25
> > kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
> > kernel: Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
> > kernel: Checking aperture...
> > kernel: Memory: 2012576k/2056060k available (2627k kernel code, 42944k
> > reserved, 1677k data, 224k init)
> > kernel: Calibrating delay loop (skipped), value calculated using timer
> > frequency.. 6186.24 BogoMIPS (lpj=3093121)
> > kernel: Security Framework v1.0.0 initialized
> > kernel: SELinux:  Initializing.
> > kernel: selinux_register_security:  Registering secondary module
> capability
> > kernel: Capability LSM initialized as secondary
> > kernel: Mount-cache hash table entries: 256
> > kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
> > kernel: CPU: L2 cache: 256K
> > kernel: CPU: L3 cache: 8192K
> > kernel: using mwait in idle threads.
> > kernel: CPU: Physical Processor ID: 0
> > kernel: CPU: Processor Core ID: 0
> > kernel: MCE: Machine Check Exception Reporting is disabled.
> > kernel: SMP alternatives: switching to UP code
> > kernel: ACPI: Core revision 20060707
> > kernel: Using local APIC timer interrupts.
> > kernel: Detected 6.236 MHz APIC timer.
> > kernel: SMP alternatives: switching to SMP code
> > kernel: Booting processor 1/4 APIC 0x2
> > kernel: Initializing CPU#1
> > kernel: Calibrating delay using timer specific routine.. 6185.87 BogoMIPS
> > (lpj=3092938)
> > kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
> > kernel: CPU: L2 cache: 256K
> > kernel: CPU: L3 cache: 8192K
> > kernel: CPU: Physical Processor ID: 0
> > kernel: CPU: Processor Core ID: 1
> > kernel:       Intel(R) Xeon(R) CPU E3-1220 V2 @ 3.10GHz stepping 09
> > kernel: SMP alternatives: switching to SMP code
> > kernel: Booting processor 2/4 APIC 0x4
> > kernel: Initializing CPU#2
> > kernel: Calibrating delay using timer specific routine.. 6185.88 BogoMIPS
> > (lpj=3092941)
> > kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
> > kernel: CPU: L2 cache: 256K
> > kernel: CPU: L3 cache: 8192K
> > kernel: CPU: Physical Processor ID: 0
> > kernel: CPU: Processor Core ID: 2
> > kernel:       Intel(R) Xeon(R) CPU E3-1220 V2 @ 3.10GHz stepping 09
> > kernel: SMP alternatives: switching to SMP code
> > kernel: Booting processor 3/4 APIC 0x6
> > kernel: Initializing CPU#3
> > kernel: Calibrating delay using timer specific routine.. 6185.86 BogoMIPS
> > (lpj=3092932)
> > kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
> > kernel: CPU: L2 cache: 256K
> > kernel: CPU: L3 cache: 8192K
> > kernel: CPU: Physical Processor ID: 0
> > kernel: CPU: Processor Core ID: 3
> > kernel:       Intel(R) Xeon(R) CPU E3-1220 V2 @ 3.10GHz stepping 09
> > kernel: Brought up 4 CPUs
> > kernel: NMI watchdog testing PASSED.
> > kernel: time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
> > kernel: time.c: Detected 3093.121 MHz processor.
> > kernel: migration_cost=23
> > kernel: checking if image is initramfs... it is
> > kernel: Freeing initrd memory: 2693k freed
> > kernel: NET: Registered protocol family 16
> > kernel: ACPI: bus type pci registered
> > kernel: Warning: pci_mmcfg_init marking 256MB space uncacheable.
> > kernel: MCFG table requires 64MB uncacheable only. Try booting with
> > acpi_mcfg_max_pci_bus_num=on
> > kernel: PCI: Using MMCONFIG at f4000000
> > kernel: ACPI: Interpreter enabled
> > kernel: ACPI: Using IOAPIC for interrupt routing
> > kernel: ACPI: No dock devices found.
> > kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
> > kernel: pci 0000:00:1c.0: PCI bridge to [bus 0a-0a]
> > kernel: pci 0000:00:1c.4: PCI bridge to [bus 02-02]
> > kernel: pci 0000:00:1c.7: PCI bridge to [bus 01-01]
> > kernel: pci 0000:00:1e.0: PCI bridge to [bus 13-13] (subtractive decode)
> > kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11)
> > kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11)
> > kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11) *0, disabled.
> > kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
> > kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11)
> > kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 11) *4
> > kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 10 11) *0, disabled.
> > kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 11) *0, disabled.
> > kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
> > kernel: pnp: PnP ACPI init
> > kernel: pnp: PnP ACPI: found 10 devices
> > kernel: usbcore: registered new driver usbfs
> > kernel: usbcore: registered new driver hub
> > kernel: PCI: Using ACPI for IRQ routing
> > kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps,
> > post a report
> > kernel: NetLabel: Initializing
> > kernel: NetLabel:  domain hash size = 128
> > kernel: NetLabel:  protocols = UNLABELED CIPSOv4
> > kernel: NetLabel:  unlabeled traffic allowed by default
> > kernel: hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2,
> 8,
> > 0, 0, 0, 0, 0, 0
> > kernel: hpet0: 8 64-bit timers, 14318180 Hz
> > kernel: DMAR:Host address width 39
> > kernel: DMAR:DRHD base: 0x000000fed90000 flags: 0x1
> > kernel: IOMMU fed90000: ver 1:0 cap c9008020660262 ecap f010da
> > kernel: DMAR:RMRR base: 0x0000007dffd000 end: 0x0000007dffffff
> > kernel: DMAR:No ATSR found
> > kernel: PCI-GART: No AMD northbridge found.
> > kernel: system 00:01: ioport range 0x408-0x40f has been reserved
> > kernel: system 00:01: ioport range 0x4d0-0x4d1 has been reserved
> > kernel: system 00:01: ioport range 0x310-0x313 has been reserved
> > kernel: system 00:01: iomem range 0xf4000000-0xf7ffffff has been reserved
> > kernel: system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
> > kernel: system 00:01: iomem range 0xfed90000-0xfed91fff has been reserved
> > kernel: pci 0000:00:1c.0: PCI bridge to [bus 0a-0a]
> > kernel: pci 0000:00:1c.0:   bridge window [io  disabled]
> > kernel: pci 0000:00:1c.0:   bridge window [mem disabled]
> > kernel: pci 0000:00:1c.0:   bridge window [mem pref disabled]
> > kernel: pci 0000:00:1c.4: PCI bridge to [bus 02-02]
> > kernel: pci 0000:00:1c.4:   bridge window [io  0x4000-0x4fff]
> > kernel: pci 0000:00:1c.4:   bridge window [mem 0xfbf00000-0xfbffffff]
> > kernel: pci 0000:00:1c.4:   bridge window [mem pref disabled]
> > kernel: pci 0000:01:00.2: BAR 6: assigned [mem 0xfad00000-0xfad0ffff
> pref]
> > kernel: pci 0000:00:1c.7: PCI bridge to [bus 01-01]
> > kernel: pci 0000:00:1c.7:   bridge window [io  0x2000-0x3fff]
> > kernel: pci 0000:00:1c.7:   bridge window [mem 0xfad00000-0xfbefffff]
> > kernel: pci 0000:00:1c.7:   bridge window [mem 0xf9000000-0xf9ffffff
> 64bit
> > pref]
> > kernel: pci 0000:00:1e.0: PCI bridge to [bus 13-13]
> > kernel: pci 0000:00:1e.0:   bridge window [io  disabled]
> > kernel: pci 0000:00:1e.0:   bridge window [mem disabled]
> > rpc.statd[2187]: Version 1.0.9 Starting
> > kernel: pci 0000:00:1e.0:   bridge window [mem pref disabled]
> > kernel: GSI 16 sharing vector 0xA9 and IRQ 16
> > kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ
> > 169
> > kernel: ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ
> > 169
> > kernel: GSI 17 sharing vector 0xB1 and IRQ 17
> > kernel: ACPI: PCI Interrupt 0000:00:1c.7[D] -> GSI 19 (level, low) -> IRQ
> > 177
> > kernel: NET: Registered protocol family 2
> > kernel: IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
> > kernel: TCP established hash table entries: 262144 (order: 10, 4194304
> > bytes)
> > kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> > kernel: TCP: Hash tables configured (established 262144 bind 65536)
> > kernel: TCP reno registered
> > kernel: audit: initializing netlink socket (disabled)
> > kernel: type=2000 audit(1420618613.662:1): initialized
> > kernel: Total HugeTLB memory allocated, 0
> > kernel: VFS: Disk quotas dquot_6.5.1
> > kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> > kernel: Initializing Cryptographic API
> > kernel: alg: No test for crc32c (crc32c-generic)
> > kernel: ksign: Installing public key data
> > kernel: Loading keyring
> > kernel: - Added public key B69F0AC84A59E856
> > kernel: - User ID: CentOS (Kernel Module GPG key)
> > kernel: io scheduler noop registered
> > kernel: io scheduler anticipatory registered
> > kernel: io scheduler deadline registered
> > kernel: io scheduler cfq registered (default)
> > kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> > kernel: ACPI: CPU0 (power states: C1[C1] C2[C2])
> > kernel: ACPI: CPU1 (power states: C1[C1] C2[C2])
> > kernel: ACPI: CPU2 (power states: C1[C1] C2[C2])
> > kernel: ACPI: CPU3 (power states: C1[C1] C2[C2])
> > kernel: ACPI: Thermal Zone [THM0] (8 C)
> > kernel: Real Time Clock Driver v1.12ac
> > kernel: Non-volatile memory driver v1.2
> > kernel: Linux agpgart interface v0.101 (c) Dave Jones
> > kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
> > enabled
> > kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> > kernel: brd: module loaded
> > kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> > kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with
> > idebus=xx
> > kernel: ide-floppy driver 0.99.newide
> > kernel: usbcore: registered new driver hiddev
> > kernel: usbcore: registered new driver usbhid
> > kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> > kernel: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq
> > 1,12
> > kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
> > kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
> > kernel: mice: PS/2 mouse device common for all mice
> > kernel: md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
> > kernel: md: bitmap version 4.39
> > kernel: TCP bic registered
> > kernel: Initializing IPsec netlink socket
> > kernel: NET: Registered protocol family 1
> > kernel: NET: Registered protocol family 17
> > kernel: ACPI: (supports S0 S4 S5)
> > kernel: Initalizing network drop monitor service
> > kernel: Freeing unused kernel memory: 224k freed
> > kernel: Write protecting the kernel read-only data: 533k
> > kernel: input: AT Translated Set 2 keyboard as /class/input/input0
> > kernel: GSI 18 sharing vector 0xD9 and IRQ 18
> > kernel: ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 21 (level, low) -> IRQ
> > 217
> > kernel: ehci_hcd 0000:00:1a.0: EHCI Host Controller
> > kernel: ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
> number
> > 1
> > kernel: ehci_hcd 0000:00:1a.0: debug port 2
> > kernel: ehci_hcd 0000:00:1a.0: irq 217, io mem 0xfacd0000
> > kernel: ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00, driver 10 Dec
> > 2004
> > kernel: usb usb1: configuration #1 chosen from 1 choice
> > kernel: hub 1-0:1.0: USB hub found
> > kernel: hub 1-0:1.0: 2 ports detected
> > kernel: GSI 19 sharing vector 0xE1 and IRQ 19
> > kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ
> > 225
> > kernel: ehci_hcd 0000:00:1d.0: EHCI Host Controller
> > kernel: ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
> number
> > 2
> > kernel: ehci_hcd 0000:00:1d.0: debug port 2
> > kernel: ehci_hcd 0000:00:1d.0: irq 225, io mem 0xfacc0000
> > kernel: ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00, driver 10 Dec
> > 2004
> > kernel: usb usb2: configuration #1 chosen from 1 choice
> > kernel: hub 2-0:1.0: USB hub found
> > kernel: hub 2-0:1.0: 2 ports detected
> > kernel: USB Universal Host Controller Interface driver v3.0
> > kernel: ACPI: PCI Interrupt 0000:01:00.4[B] -> GSI 16 (level, low) -> IRQ
> > 169
> > kernel: uhci_hcd 0000:01:00.4: UHCI Host Controller
> > kernel: uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus
> number
> > 3
> > kernel: uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports
> > kernel: uhci_hcd 0000:01:00.4: irq 169, io base 0x00002000
> > kernel: usb usb3: configuration #1 chosen from 1 choice
> > kernel: hub 3-0:1.0: USB hub found
> > kernel: hub 3-0:1.0: 2 ports detected
> > kernel: usb 1-1: new high speed USB device using ehci_hcd and address 2
> > kernel: md: raid1 personality registered for level 1
> > kernel: SCSI subsystem initialized
> > kernel: GSI 20 sharing vector 0xE9 and IRQ 20
> > kernel: ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ
> > 233
> > kernel: usb 1-1: configuration #1 chosen from 1 choice
> > kernel: hub 1-1:1.0: USB hub found
> > kernel: hub 1-1:1.0: 6 ports detected
> > kernel: usb 2-1: new high speed USB device using ehci_hcd and address 2
> > kernel: usb 2-1: configuration #1 chosen from 1 choice
> > kernel: hub 2-1:1.0: USB hub found
> > kernel: hub 2-1:1.0: 6 ports detected
> > kernel: usb usb3: Controller not stopped yet!
> > kernel: ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f
> impl
> > SATA mode
> > kernel: ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp
> > pio slum part ems
> > kernel: scsi0 : ahci
> > kernel: scsi1 : ahci
> > kernel: scsi2 : ahci
> > kernel: scsi3 : ahci
> > kernel: scsi4 : ahci
> > kernel: scsi5 : ahci
> > kernel: ata1: SATA max UDMA/133 abar m2048 en 0xfacb0000 port 0xfacb0100
> irq
> > 50
> > kernel: ata2: SATA max UDMA/133 abar m2048 en 0xfacb0000 port 0xfacb0180
> irq
> > 50
> > kernel: ata3: SATA max UDMA/133 abar m2048 en 0xfacb0000 port 0xfacb0200
> irq
> > 50
> > kernel: ata4: SATA max UDMA/133 abar m2048 en 0xfacb0000 port 0xfacb0280
> irq
> > 50
> > kernel: ata5: SATA max UDMA/133 abar m2048 en 0xfacb0000 port 0xfacb0300
> irq
> > 50
> > kernel: ata6: SATA max UDMA/133 abar m2048 en 0xfacb0000 port 0xfacb0380
> irq
> > 50
> > kernel: ata1: SATA link down (SStatus 0 SControl 300)
> > kernel: ata2: SATA link down (SStatus 0 SControl 300)
> > kernel: ata3: SATA link down (SStatus 0 SControl 300)
> > kernel: ata4: SATA link down (SStatus 0 SControl 300)
> > kernel: ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> > kernel: ata5.00: ATA-8: MB1000GCEHH, HPGD, max UDMA/133
> > kernel: ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> > kernel: ata5.00: configured for UDMA/133
> > kernel: ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> > kernel: ata6.00: ATA-8: MB1000GCEHH, HPGD, max UDMA/133
> > kernel: ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> > kernel: ata6.00: configured for UDMA/133
> > kernel:   Vendor: ATA       Model: MB1000GCEHH       Rev: HPGD
> > kernel:   Type:   Direct-Access                      ANSI SCSI revision:
> 05
> > kernel: SCSI device sda: 1953525168 512-byte hdwr sectors (1000205 MB)
> > kernel: sda: Write Protect is off
> > kernel: SCSI device sda: drive cache: write back
> > kernel: SCSI device sda: 1953525168 512-byte hdwr sectors (1000205 MB)
> > kernel: sda: Write Protect is off
> > kernel: SCSI device sda: drive cache: write back
> > kernel:  sda: sda1 sda2 sda3
> > kernel: sd 4:0:0:0: Attached scsi disk sda
> > kernel:   Vendor: ATA       Model: MB1000GCEHH       Rev: HPGD
> > kernel:   Type:   Direct-Access                      ANSI SCSI revision:
> 05
> > kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB)
> > kernel: sdb: Write Protect is off
> > kernel: SCSI device sdb: drive cache: write back
> > kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB)
> > kernel: sdb: Write Protect is off
> > kernel: SCSI device sdb: drive cache: write back
> > kernel:  sdb: sdb1 sdb2 sdb3
> > kernel: sd 5:0:0:0: Attached scsi disk sdb
> > kernel: md: raid0 personality registered for level 0
> > kernel: Initializing USB Mass Storage driver...
> > kernel: usbcore: registered new driver usb-storage
> > kernel: USB Mass Storage support registered.
> > kernel: device-mapper: uevent: version 1.0.3
> > kernel: device-mapper: ioctl: 4.11.6-ioctl (2011-02-18) initialised:
> > dm-devel en redhat.com <javascript:;>
> > kernel: device-mapper: dm-raid45: initialized v0.2594l
> > kernel: md: Autodetecting RAID arrays.
> > kernel: md: autorun ...
> > kernel: md: considering sdb3 ...
> > kernel: md:  adding sdb3 ...
> > kernel: md: sdb2 has different UUID to sdb3
> > kernel: md: sdb1 has different UUID to sdb3
> > kernel: md:  adding sda3 ...
> > kernel: md: sda2 has different UUID to sdb3
> > kernel: md: sda1 has different UUID to sdb3
> > kernel: md: created md2
> > kernel: md: bind<sda3>
> > kernel: md: bind<sdb3>
> > kernel: md: running: <sdb3><sda3>
> > kernel: raid1: raid set md2 active with 2 out of 2 mirrors
> > kernel: md: considering sdb2 ...
> > kernel: md:  adding sdb2 ...
> > kernel: md: sdb1 has different UUID to sdb2
> > kernel: md:  adding sda2 ...
> > kernel: md: sda1 has different UUID to sdb2
> > kernel: md: created md0
> > kernel: md: bind<sda2>
> > kernel: md: bind<sdb2>
> > kernel: md: running: <sdb2><sda2>
> > kernel: md0: setting max_sectors to 512, segment boundary to 131071
> > kernel: raid0: looking at sdb2
> > kernel: raid0:   comparing sdb2(2096384) with sdb2(2096384)
> > kernel: raid0:   END
> > kernel: raid0:   ==> UNIQUE
> > kernel: raid0: 1 zones
> > kernel: raid0: looking at sda2
> > kernel: raid0:   comparing sda2(2096384) with sdb2(2096384)
> > kernel: raid0:   EQUAL
> > kernel: raid0: FINAL 1 zones
> > kernel: raid0: done.
> > kernel: raid0 : md_size is 4192768 blocks.
> > kernel: raid0 : conf->hash_spacing is 4192768 blocks.
> > kernel: raid0 : nb_zone is 1.
> > kernel: raid0 : Allocating 8 bytes for hash.
> > kernel: md: considering sdb1 ...
> > kernel: md:  adding sdb1 ...
> > kernel: md:  adding sda1 ...
> > kernel: md: created md1
> > kernel: md: bind<sda1>
> > kernel: md: bind<sdb1>
> > kernel: md: running: <sdb1><sda1>
> > kernel: raid1: raid set md1 active with 2 out of 2 mirrors
> > kernel: md: ... autorun DONE.
> > kernel: md: Autodetecting RAID arrays.
> > kernel: md: autorun ...
> > kernel: md: ... autorun DONE.
> > kernel: kjournald starting.  Commit interval 5 seconds
> > kernel: EXT3-fs: mounted filesystem with ordered data mode.
> > kernel: SELinux:  Disabled at runtime.
> > kernel: type=1404 audit(1420618647.375:2): selinux=0 auid=4294967295
> > ses=4294967295
> > kernel: input: PC Speaker as /class/input/input1
> > kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> > kernel: ACPI: PCI Interrupt 0000:01:00.2[B] -> GSI 16 (level, low) -> IRQ
> > 169
> > kernel: e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
> > kernel: e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
> > kernel: e1000e 0000:02:00.0: Disabling ASPM L0s L1
> > kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ
> > 169
> > kernel: e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to
> > dynamic conservative mode
> > kernel: Floppy drive(s): fd0 is 1.44M
> > kernel: sd 4:0:0:0: Attached scsi generic sg0 type 0
> > kernel: sd 5:0:0:0: Attached scsi generic sg1 type 0
> > kernel: e1000e 0000:02:00.0: eth0: (PCI Express:2.5GT/s:Width x1)
> > 38:ea:a7:aa:8a:32
> > kernel: e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
> > kernel: e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
> > kernel: floppy0: no floppy controllers found
> > kernel: work still pending
> > kernel: Floppy drive(s): fd0 is 1.44M
> > kernel: floppy0: no floppy controllers found
> > kernel: work still pending
> > kernel: lp: driver loaded but no devices found
> > kernel: ACPI: Power Button (FF) [PWRF]
> > kernel: ACPI: Mapper loaded
> > kernel: dell-wmi: No known WMI GUID found
> > kernel: md: Autodetecting RAID arrays.
> > kernel: md: autorun ...
> > kernel: md: ... autorun DONE.
> > kernel: device-mapper: multipath: version 1.0.6 loaded
> > kernel: EXT3 FS on md2, internal journal
> > kernel: kjournald starting.  Commit interval 5 seconds
> > kernel: EXT3 FS on md1, internal journal
> > kernel: EXT3-fs: mounted filesystem with ordered data mode.
> > kernel: Adding 4192760k swap on /dev/md0.  Priority:-1 extents:1
> > across:4192760k
> > kernel: Loading iSCSI transport class v2.0-871.
> > kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb en candelatech.com
> > <javascript:;>>
> > kernel: All bugs added by David S. Miller <davem en redhat.com
> <javascript:;>
> > >
> > kernel: libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf,
> 4
> > bits.
> > kernel: libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
> > kernel: Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
> > kernel: iscsi: registered transport (cxgb3i)
> > kernel: IPv6: Loaded, but administratively disabled, reboot required to
> > enable
> > kernel: cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.12 (June 29,
> > 2012)
> > kernel: Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.2.2 (Jun 18, 2012)
> > kernel: iscsi: registered transport (bnx2i)
> > kernel: iscsi: registered transport (tcp)
> > kernel: iscsi: registered transport (iser)
> > kernel: iscsi: registered transport (be2iscsi)
> > kernel: 8021q: adding VLAN 0 to HW filter on device eth0
> > kernel: e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
> Rx
> > ntpd[2452]: ntpd 4.2.2p1 en 1.1570-o Fri Nov 18 13:21:21 UTC 2011 (1)
> > ntpd[2453]: precision = 1.000 usec
> > ntpd[2453]: Listening on interface wildcard, 0.0.0.0#123 Disabled
> > ntpd[2453]: Listening on interface lo, 127.0.0.1#123 Enabled
> > ntpd[2453]: Listening on interface eth0, 178.18.69.1#123 Enabled
> > ntpd[2453]: kernel time sync status 0040
> > ntpd[2453]: getaddrinfo: "::1" invalid host address, ignored
> > xinetd[2437]: xinetd Version 2.3.14 started with libwrap loadavg
> > labeled-networking options compiled in.
> > xinetd[2437]: Started working: 1 available service
> > FaxQueuer[2970]: HylaFAX (tm) Version 4.3.10
> > FaxQueuer[2970]: Copyright (c) 1990-1996 Sam Leffler
> > FaxQueuer[2970]: Copyright (c) 1991-1996 Silicon Graphics, Inc.
> > HylaFAX[2973]: HylaFAX INET Protocol Server: restarted.
> > saslauthd[3001]: detach_tty      : master pid is: 3001
> > saslauthd[3001]: ipc_init        : listening on socket:
> > /var/run/saslauthd/mux
> > ntpd[2453]: frequency initialized 8.527 PPM from /var/lib/ntp/drift
> > ntpd[2453]: synchronized to 200.27.106.115, stratum 1
> > ntpd[2453]: kernel time sync enabled 0001
> > _______________________________________________
> > CentOS-es mailing list
> > CentOS-es en centos.org <javascript:;>
> > http://lists.centos.org/mailman/listinfo/centos-es
> >
>
>
> --
> Aldo Rivadeneira Reyna
> _______________________________________________
> CentOS-es mailing list
> CentOS-es en centos.org
> http://lists.centos.org/mailman/listinfo/centos-es
>


Más información sobre la lista de distribución CentOS-es