Hello again. Unfortunatelly we do not have that much materials in English. (But if you can read Russian - welcome to http://www.ossportal.ru/technologies/rhev. :-) ) If you want just to see SPICE in action it is not hard. You need qemu with SPICE support on server and SPICE client on client. You need to start qemu on server with additional options: -spice port=<port>,disable-ticketing - use this one if you do not need password protection OR -spice port=<port>,password=<secret> - if you need to protect connection After it you can connect from client using spicec -h <host> -p <port> Additional options for compression, encryption, etc are described in qemu man page. Best regards, Alexey 2010/11/16 Scott Dowdle <dowdle at montanalinux.org> > Greetings, > > ----- Original Message ----- > > I don’t suppose you have any websites you would recommend that shows > > how to install and use spice? > > I second that question. While I've found instructions here and there, and > have even given Fedora 14 a try as well... the processes is very manual and > I have yet to find a very detailed set of instructions for getting SPICE > going. > > I understand that the benchmark paper used RHEV for Desktops... which I > assume does all of the work for you... but what about us folks who are using > RHEL 5.5, RHEL 6, and/or Fedora 14. All of them come with KVM and SPICE > packages but we need some detailed instructions on setting it up and making > it work. > > Thanks in advance for any consideration, > -- > Scott Dowdle > 704 Church Street > Belgrade, MT 59714 > (406)388-0827 [home] > (406)994-3931 [work] > _______________________________________________ > CentOS-virt mailing list > CentOS-virt at centos.org > http://lists.centos.org/mailman/listinfo/centos-virt > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos-virt/attachments/20101116/d4af3fd7/attachment-0006.html>