On Fri, Jul 15, 2011 at 6:24 PM, Emmanuel Noobadmin <centos.admin at gmail.com>wrote: > On 7/16/11, Trey Dockendorf <treydock at gmail.com> wrote: > > I have successfully bridged one of the server's NICs to br0, and I can > ping > > the IP remotely that is assigned to br0, but none of the VMs that worked > in > > 5.6's KVM are able to access the network. Please let me know what > > information would be useful to troubleshoot this. > > Could you try creating a new VM using the GUI tool, then check if the > networking works from it? > > I was having problems with KVM and part of the troubleshooting process > got me to try it on SL6, which finally led me to discover that the > command line tool generated XML doesn't work as well as the GUI tool > for some reason. So there's the possibility that it could be that the > definitions created through virsh in 5.6 has the same issues in CentOS > 6. > _______________________________________________ > CentOS-virt mailing list > CentOS-virt at centos.org > http://lists.centos.org/mailman/listinfo/centos-virt > I did try another VM (CentOS 6) via virt-manager with the same results. However I setup a test server at home, and am able to get both bridging and NAT to work so this may be an issue with the network on my server. It's a University network and their switches tend to play havoc with virtual servers even though I've been assured enough MAC addresses have been allowed on my port. How does one troubleshoot or provide debug information on a correctly or incorrectly functioning network bridge? As I contact my University's helpdesk I'd like to be able to point out the fault is not with my KVM server. Thanks - Trey -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos-virt/attachments/20110716/3aeafd08/attachment-0003.html>