[CentOS] [SOLVED?] PE-2850 to AX100 via Qlogic Card (QLA200 HBA) on CentOS 4.1

kadafax kadafax at gmail.com
Mon Oct 10 15:41:05 UTC 2005


I respond to myself, in case it may help someone with the same hardware:
the good drivers (at least the rpm's output says that everything is ok) 
are the dkms's one:
http://download.qlogic.com/drivers/32113/qla2xxx-v8.00.03b-1dkms.tar.gz
---
# rpm -Uvh dkms-2.0.5-1.noarch.rpm
# rpm -Uvh qla2xxx-v8.00.03b-1dkms.noarch.rpm

It need the kernel devel package in order to build the module.
[OFF] It seems that my Selinux was the source of the scriplet error.
Btw lspci output still shows:
09:04.0 Fibre Channel: QLogic Corp.: Unknown device 6312 (rev 03)

Thanks anyway and if someone use the same hardware on CentOS I would 
really appreciate some hints for a clean install.
kadafax

kadafax wrote:

> I found drivers who seems to be arch independent at 
> http://qlogic.com/support/oem_product_detail.asp?p_id=680&oemid=284&oemname=QLA200 
>
>
> but, I've got the same error:
> ---
> # ./qlinstall
>
> #*********************************************************#
> #            QLogic HBA Linux Driver Installation         #
> #                  Version:  1.00.00b2pre16               #
> #*********************************************************#
>
> Kernel version: 2.6.9-11.ELsmp
> Distribution: CentOS release 4.1 (Final)
>
> Found QLogic Fibre Channel Adapter in the system
>    1: QLA6312
> Installation will begin for following driver(s)
>    1: qla2xxx version: v8.00.03b
>
> Preparing...                
> ##################################################
> error: %pre(qla2xxx-v8.00.03b-1.noarch) scriptlet failed, exit status 255
> error:   install: %pre scriptlet failed (2), skipping qla2xxx-v8.00.03b-1
> ---
> Do you know what is this "scriptlet" error?
> thanks
>
>> Johnny Hughes wrote:
>>
>>> If you installed the x86_64 arch ... Yes, it looks like that RPM was
>>> written for an i686 kernel.
>>>
>>> Where did you get the RPM?  Do that have a SRPM?  Do they have an RPM
>>> for x86_64.
>>>  
>>>
>> From the CD shipped with the card (by Dell, it was an all in one: 
>> PE-2850 & QLA-200HBA & EMC AX-100). There is no source on the CD nor 
>> X86-64 version. I can't find any driver for the QLA-200 on 
>> support.qlogic.com, except the windows one... I keep searching.
>>
>>> ------------------------------------------------------------------------ 
>>>
>>>
>>> _______________________________________________
>>> CentOS mailing list
>>> CentOS at centos.org
>>> http://lists.centos.org/mailman/listinfo/centos
>>>  
>>>
>>
>> _______________________________________________
>> CentOS mailing list
>> CentOS at centos.org
>> http://lists.centos.org/mailman/listinfo/centos
>>
>
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org
> http://lists.centos.org/mailman/listinfo/centos
>




More information about the CentOS mailing list