Aleksandar Milivojevic wrote: > According to Adaptec web site, seems they are selling directly only 4, > 8 and 16 ports cards in 2x10SA series (2410SA, 2810SA and 21610SA > respectively). Your 6-port version is probably OEM card made by > Adaptec exclusively for system integrators. My guess is that it > should work with standard aacraid device driver (like the rest of the > cards in 2x10SA series), if you can get the driver to recognize the > card. When it says that it can't find any hard drives during > installation, click on the option to manualy load driver, then add > aacraid driver to list of drivers to be loaded. > > Looking at kernel source (Centos 4.2, kernel-2.6.9-22.EL), the card > seems to be listed in drivers/scsi/aacraid/linit.c file. If it > doesn't work for you, then Dell probably used its own PCI ID for the > card (you can check the file and see if PCI ID in line for 2610SA is > the same as the one in your card). There are also catch-all lines at > the end of the list. > I tried these drivers and nothing worked. I have just tried Fedora Core 5 Test 2 release and it finds the card right away just by booting to disk 1. Perhaps the next version of CentOS will support these cards by default. Thanks for the reply.