Ok,
Here is an update, if I use a kernel later than 2.6.9 eg a fc4 2.6.13
kernel dma works, but I get openswan issues.
In this directory for my orginal kernel:
/usr/src/kernels/2.6.9-22.0.2.EL-smp-i686/include/linux
I looked at the pci_ids.h header file and found this line:
/* ATI IXP Chipset */
#define PCI_DEVICE_ID_ATI_IXP_IDE 0x4349
I spoke to my buddy at ATI and he reckons it should be ok just to change
the header file, I haven't checked the fc4 kernel source yet
So I changed it to 0x4369 to match my chipset, [found this from a bit of
googling to support this theory]
------------------------
When I try to make a new kernel I get this error (using make rpm)
--------------------------
CHK include/asm-i386/asm_offsets.h
/bin/sh: arch/i386/kernel/asm-offsets.s: No such file or directory
UPD include/asm-i386/asm_offsets.h
mv: cannot stat `include/asm-i386/asm_offsets.h.tmp': No such file or
directory
make[2]: *** [include/asm-i386/asm_offsets.h] Error 1
make[2]: *** Waiting for unfinished jobs....
HOSTCC scripts/basic/split-include
HOSTCC scripts/basic/docproc
error: Bad exit status from /var/tmp/rpm-tmp.45549 (%build)
RPM build errors:
Bad exit status from /var/tmp/rpm-tmp.45549 (%build)
make[1]: *** [rpm] Error 1
make: *** [rpm] Error 2
-----------------------
I found the missing asm-offsets.h from the equivalent uni-proc kernel,
and copied it across, however the "make clean" part of "make rpm"
deletes this file.
Question is, does anyone know why this file would be missing, has
anyone seen it before?
Any advice is welcome!
Pete
Peter Farrow wrote:
> Dear All,
>
> I just upgraded my firewall/smarthost to a 2.6 GHz P4 on a Gigabyte
> board with the ATI RS350 chipset. Unfortunately the chipset isn't
> support on the kernel and I get slow disk performance
>
> lspci gives this:
> lspci
> 00:00.0 Host bridge: ATI Technologies Inc Radeon 9100 IGP Host Bridge
> 00:01.0 PCI bridge: ATI Technologies Inc Radeon 9100 IGP PCI/AGP Bridge
> 00:13.0 USB Controller: ATI Technologies Inc: Unknown device 4367 (rev 01)
> 00:13.1 USB Controller: ATI Technologies Inc: Unknown device 4368 (rev 01)
> 00:13.2 USB Controller: ATI Technologies Inc: Unknown device 4365 (rev 01)
> 00:14.0 SMBus: ATI Technologies Inc ATI SMBus (rev 03)
> 00:14.1 IDE interface: ATI Technologies Inc: Unknown device 4369 (rev 01)
> 00:14.2 IDE interface: ATI Technologies Inc ATI 436E Serial ATA
> Controller (rev
> 01)
> 00:14.3 ISA bridge: ATI Technologies Inc: Unknown device 436c (rev 01)
> 00:14.4 PCI bridge: ATI Technologies Inc: Unknown device 4362 (rev 01)
> 00:14.5 Multimedia audio controller: ATI Technologies Inc: Unknown
> device 4361 (
> rev 03)
> 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon 9100
> PRO IGP
>
>
> I am running this kernel:
>
> 2.6.9-22.0.2.ELsmp
>
>
> Anybody know if there is a kernel out there to support this chipset?
>
> P.
>
>
> --
> This message has been scanned for viruses and
> dangerous content by the *Farrows.org* <http://www.farrows.org/>
> system scanner, and is believed to be clean.
> ------------------------------------------------------------------------
>
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org
> http://lists.centos.org/mailman/listinfo/centos
>