Peter Farrow wrote: > Ok, > > Here is an update, if I use a kernel later than 2.6.9 eg a fc4 2.6.13 > kernel dma works, but I get openswan issues. > > In this directory for my orginal kernel: > > /usr/src/kernels/2.6.9-22.0.2.EL-smp-i686/include/linux > > I looked at the pci_ids.h header file and found this line: > /* ATI IXP Chipset */ > #define PCI_DEVICE_ID_ATI_IXP_IDE 0x4349 > > I spoke to my buddy at ATI and he reckons it should be ok just to change > the header file, I haven't checked the fc4 kernel source yet > So I changed it to 0x4369 to match my chipset, [found this from a bit of > googling to support this theory] > > ------------------------ > When I try to make a new kernel I get this error (using make rpm) > -------------------------- > CHK include/asm-i386/asm_offsets.h > /bin/sh: arch/i386/kernel/asm-offsets.s: No such file or directory > UPD include/asm-i386/asm_offsets.h > mv: cannot stat `include/asm-i386/asm_offsets.h.tmp': No such file or > directory > make[2]: *** [include/asm-i386/asm_offsets.h] Error 1 > make[2]: *** Waiting for unfinished jobs.... > HOSTCC scripts/basic/split-include > HOSTCC scripts/basic/docproc > error: Bad exit status from /var/tmp/rpm-tmp.45549 (%build) > RPM build errors: > Bad exit status from /var/tmp/rpm-tmp.45549 (%build) > make[1]: *** [rpm] Error 1 > make: *** [rpm] Error 2 > ----------------------- > > I found the missing asm-offsets.h from the equivalent uni-proc kernel, > and copied it across, however the "make clean" part of "make rpm" > deletes this file. > > Question is, does anyone know why this file would be missing, has > anyone seen it before? > > Any advice is welcome! > > Pete > > > > > > > > Peter Farrow wrote: >> Dear All, >> >> I just upgraded my firewall/smarthost to a 2.6 GHz P4 on a Gigabyte >> board with the ATI RS350 chipset. Unfortunately the chipset isn't >> support on the kernel and I get slow disk performance >> >> lspci gives this: >> lspci >> 00:00.0 Host bridge: ATI Technologies Inc Radeon 9100 IGP Host Bridge >> 00:01.0 PCI bridge: ATI Technologies Inc Radeon 9100 IGP PCI/AGP Bridge >> 00:13.0 USB Controller: ATI Technologies Inc: Unknown device 4367 (rev >> 01) >> 00:13.1 USB Controller: ATI Technologies Inc: Unknown device 4368 (rev >> 01) >> 00:13.2 USB Controller: ATI Technologies Inc: Unknown device 4365 (rev >> 01) >> 00:14.0 SMBus: ATI Technologies Inc ATI SMBus (rev 03) >> 00:14.1 IDE interface: ATI Technologies Inc: Unknown device 4369 (rev 01) >> 00:14.2 IDE interface: ATI Technologies Inc ATI 436E Serial ATA >> Controller (rev >> 01) >> 00:14.3 ISA bridge: ATI Technologies Inc: Unknown device 436c (rev 01) >> 00:14.4 PCI bridge: ATI Technologies Inc: Unknown device 4362 (rev 01) >> 00:14.5 Multimedia audio controller: ATI Technologies Inc: Unknown >> device 4361 ( >> rev 03) >> 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon 9100 >> PRO IGP >> >> >> I am running this kernel: >> >> 2.6.9-22.0.2.ELsmp >> >> >> Anybody know if there is a kernel out there to support this chipset? >> >> P. >> >> the issue you are trying to solve is the same as the issue the guys with the Turion64 laptops are trying to work through - chase the same details. 2.6.9 will work fine with your mobo, but needs some param's setup properly. -- Karanbir Singh : http://www.karan.org/ : 2522219 at icq