Frank Cox wrote: > On Tue, 25 Dec 2007 07:30:51 -0500 > Robert Moskowitz <rgm at htt-consult.com> wrote: > >> So what am I missing configuration-wise? >> > > Does k3b work? (You can use k3b on a Gnome system -- I do it all the time.) No it does not. It prompts me for media, even if I preload the disk before start k3b. If I 'force' I get a failure and this is the details (I see a message in the gui error window about using TAO?): System ----------------------- K3b Version: 0.12.17 KDE Version: 3.5.4-13.el5.centos CentOS QT Version: 3.3.6 Kernel: 2.6.18-53.1.4.el5 Devices ----------------------- HP CD-Writer+ 8200f 1.0A (/dev/scd0, ) at [CD-R; CD-RW; CD-ROM] [Error] [SAO; TAO; RAW; SAO/R96R; RAW/R16; RAW/R96R] COMPAQ CD-ROM CRN-8241B 2.23 (/dev/hdc, ) at [CD-ROM] [Error] [None] Used versions ----------------------- cdrecord: 2.1 cdrecord ----------------------- scsidev: '/dev/scd0' devname: '/dev/scd0' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 /usr/bin/cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling'). SCSI buffer size: 64512 Cdrecord-Clone 2.01 (cpu-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to http://bugzilla.redhat.com/bugzilla Note: The author of cdrecord should not be bothered with problems in this version. TOC Type: 1 = CD-ROM Using libscg version 'schily-0.8'. atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'HP ' Identifikation : 'CD-Writer+ 8200f' Revision : '1.0A' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC SWABAUDIO Supported modes: TAO PACKET SAO SAO/R96R RAW/R16 RAW/R96R FIFO size : 4194304 = 4096 KB /usr/bin/cdrecord: Input/output error. test unit ready: scsi sendcmd: no error CDB: 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00 Sense Key: 0x2 Not Ready, Segment 0 Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.017s timeout 200s /usr/bin/cdrecord: No disk / Wrong disk! Track 01: data 528 MB Total size: 606 MB (60:05.53) = 270415 sectors Lout start: 606 MB (60:07/40) = 270415 sectors cdrecord command: ----------------------- /usr/bin/cdrecord -v gracetime=2 dev=/dev/scd0 speed=4 -dao -eject -data /root/CentOS-5.1-i386-bin-6of6.iso ================================= Note that this is a USB device.