on 12/25/2007 4:39 PM Robert Moskowitz spake the following: > Frank Cox wrote: >> On Tue, 25 Dec 2007 07:30:51 -0500 >> Robert Moskowitz <rgm at htt-consult.com> wrote: >> >>> So what am I missing configuration-wise? >>> >> >> Does k3b work? (You can use k3b on a Gnome system -- I do it all the >> time.) > No it does not. > > > It prompts me for media, even if I preload the disk before start k3b. > If I 'force' I get a failure and this is the details (I see a message in > the gui error window about using TAO?): > > System > ----------------------- > K3b Version: 0.12.17 > > KDE Version: 3.5.4-13.el5.centos CentOS > QT Version: 3.3.6 > Kernel: 2.6.18-53.1.4.el5 > Devices > ----------------------- > HP CD-Writer+ 8200f 1.0A (/dev/scd0, ) at [CD-R; CD-RW; CD-ROM] [Error] > [SAO; TAO; RAW; SAO/R96R; RAW/R16; RAW/R96R] > > COMPAQ CD-ROM CRN-8241B 2.23 (/dev/hdc, ) at [CD-ROM] [Error] [None] > Used versions > ----------------------- > cdrecord: 2.1 > > cdrecord > ----------------------- > scsidev: '/dev/scd0' > devname: '/dev/scd0' > scsibus: -2 target: -2 lun: -2 > Linux sg driver version: 3.5.27 > /usr/bin/cdrecord: Warning: using inofficial libscg transport code > version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c > 1.83 04/05/20 Copyright 1997 J. Schilling'). > SCSI buffer size: 64512 > Cdrecord-Clone 2.01 (cpu-pc-linux-gnu) Copyright (C) 1995-2004 J�rg > Schilling > Note: This version is an unofficial (modified) version with DVD support > Note: and therefore may have bugs that are not present in the original. > Note: Please send bug reports or support requests to > http://bugzilla.redhat.com/bugzilla > Note: The author of cdrecord should not be bothered with problems in > this version. > TOC Type: 1 = CD-ROM > Using libscg version 'schily-0.8'. > atapi: 1 > Device type : Removable CD-ROM > Version : 0 > Response Format: 1 > Vendor_info : 'HP ' > Identifikation : 'CD-Writer+ 8200f' > Revision : '1.0A' > Device seems to be: Generic mmc CD-RW. > Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). > Driver flags : MMC SWABAUDIO > Supported modes: TAO PACKET SAO SAO/R96R RAW/R16 RAW/R96R > FIFO size : 4194304 = 4096 KB > /usr/bin/cdrecord: Input/output error. test unit ready: scsi sendcmd: no > error > CDB: 00 00 00 00 00 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00 > Sense Key: 0x2 Not Ready, Segment 0 > Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0 > Sense flags: Blk 0 (not valid) > cmd finished after 0.017s timeout 200s > /usr/bin/cdrecord: No disk / Wrong disk! > Track 01: data 528 MB > Total size: 606 MB (60:05.53) = 270415 sectors > Lout start: 606 MB (60:07/40) = 270415 sectors > > cdrecord command: > ----------------------- > /usr/bin/cdrecord -v gracetime=2 dev=/dev/scd0 speed=4 -dao -eject -data > /root/CentOS-5.1-i386-bin-6of6.iso > > > ================================= > > Note that this is a USB device. I had an old drive like that that I had to retire as it wouldn't accept any newer disks. I saw mention of XP systems. Do those disks work in that drive running under windows? -- MailScanner is like deodorant... You hope everybody uses it, and you notice quickly if they don't!!!!