On 7/17/07, Scott Ehrlich <scott at mit.edu> wrote: > smartctl, hdparm, and sdparm all are valuable tools to obtain hard drive > info. But, they don't seem to work, at least, on obtaining hard drive info > from drives on a Dell PERC controller. Instead, I'm given basic PERC > controller info, not drive info. > > Is there a tool to let me get the hard drive make/model/serial numbers from a > hardware RAID setup? Since you are using HW RAID the tools you mentioned cannot be used to get the HD serial numbers. This is because the RAID controllers completely hides the physical disks from the OS. You would need tools for the RAID controller itself, those should be able to get the info you need. Regards, Tim -- Tim Verhoeven - dj at rootshell.be - 0479 / 88 11 83 Hoping the problem magically goes away by ignoring it is the "microsoft approach to programming" and should never be allowed. (Linus Torvalds)