[CentOS] Lan Kernel Problem

[Craig White]

try 8139too

On Tue, 2007-10-23 at 20:22 -0200, Linux Man wrote:
> Well, with lspci, the two NIC's are Realtek Semiconductor Co., Ltd.
> RTL-28139/8139C/8139C+ (rev 10) and ADMtek NC100 Network Everywhere
> Fast Ethernet 10/100 (rev 11), how can I know the kernel modules
> asociated?
> Thanks!
> 
> 
> 2007/10/23, Alain Spineux <aspineux at gmail.com>:
> > Look in your fedora fc1 or knoppix witch module was loaded for your two nic.
> > Then try a
> > # modprobe <your_module_name_here>
> > then
> > # dmesg
> > to look if both nics where recognized.
> > If so you have to update your modprobe.conf
> >
> > Alain
> >
> > Regards
> >
> >
> >
> > On 10/22/07, Linux Man <linuxman.uru at gmail.com> wrote:
> > > I'm building a Linux box to act as Proxy/Router/Firewall.
> > > I'm using CentOS 4.5, with an "old" motherboard (Asus A8V-X), and two
> > > Ethernet NIC, based on a realtek chip, that's widely supported under
> > > 2.4 and later kernel (the cards were functioning excellent in another
> > > PC whit Fedora Core 1).
> > > CentOS detects the on board LAN, but not the other two, in fact,
> > > knoppix 5.0.1 doesn't detect too (kernel 2.6.17), but, Knoppix 5.1.1
> > > (kernel 2.6.19) detects all three cards.
> > > Do you have any idea why this behavior?
> > > Centos 5.0 detects all three too, but I don't now why, my firewall
> > > script (ipv4) doesn't work with this release.
> > >
> > > Now, thank you very much!

-- 
Craig White <craig at tobyhouse.com>