Timothy Selivanow wrote: > > On Fri, 2008-04-11 at 17:23 -0400, Ross S. W. Walker wrote: > > > This should give you what you need when doing 802.3ad LAGs: > > > > interface FastEthernet0/21 > > port group 1 > > spanning-tree portfast > > ! > > interface FastEthernet0/22 > > port group 1 > > spanning-tree portfast > > ! > > Using this on the switch and mode=4 for bonding results in the machine > not being able to contact anything (happens with just 'port group 1' > too, I tried that a "long" time ago), but there aren't any errors. So, > it doesn't work, but I couldn't tell you why. Is there anything else > that needs to be done, perhaps on the host's side? Can you post the ifcfg files used and the output of /proc/net/bonding/bond0? -Ross ______________________________________________________________________ This e-mail, and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution or copying of this e-mail, and any attachments thereto, is strictly prohibited. If you have received this e-mail in error, please immediately notify the sender and permanently delete the original and any copy or printout thereof.