[CentOS] centos on intel D945GCLF board

Tue Aug 19 17:42:57 UTC 2008
Janez Košmrlj <janezkosmr at volja.net>

I don't have fedora installed on the machine any more. But if i 
understand correctly, if compiling the driver doesn't work, i can copy 
the module from a fedora machine and replace the current one?

ABBAS KHAN wrote:
> Thats what I wanted to know and thats exactly what I saw people 
> complaining about this card's incompatibility with kernel.
> If you have time to work on the issue, if you want to find out the 
> bottom causes and if compiling the new driver doesn't help; you can 
> boot to Fedora and get the Kernel version and the driver's module 
> number and then switch back to CentOS, try to load the same module
> (i hope it would be also in CentOS under /lib/modules/) through 
> modprobe and then the same kernel environment, if possible - since you 
> already told that Fedora's drivers work fine for you!
>
> I hope this helps!
>
>
>
>
>
> On Tue, Aug 19, 2008 at 7:49 AM, Janez Košmrlj <janezkosmr at volja.net 
> <mailto:janezkosmr at volja.net>> wrote:
>
>     Here is the lspci output from the machine:
>
>     root at buhtl:~# lspci
>     00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory
>     Controller Hub (rev 02)
>     00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ
>     Integrated Graphics Controller (rev 02)
>     00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
>     Definition Audio Controller (rev 01)
>     00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI
>     Express Port 1 (rev 01)
>     00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI
>     Express Port 3 (rev 01)
>     00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI
>     Express Port 4 (rev 01)
>     00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
>     UHCI Controller #1 (rev 01)
>     00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
>     UHCI Controller #2 (rev 01)
>     00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
>     UHCI Controller #3 (rev 01)
>     00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
>     UHCI Controller #4 (rev 01)
>     00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family)
>     USB2 EHCI Controller (rev 01)
>     00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
>     00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC
>     Interface Bridge (rev 01)
>     00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE
>     Controller (rev 01)
>     00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7
>     Family) SATA IDE Controller (rev 01)
>     00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus
>     Controller (rev 01)
>     01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
>     RTL8101E PCI Express Fast Ethernet controller (rev ff)
>     04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
>     RTL-8139/8139C/8139C+ (rev 10)
>
>     the RTL-8139 is the secondary card pluged in the pci slot ad this
>     one works ok.
>
>     And yes this is the module.
>
>     And to Michael. I know of the disabling on-board LAN workaround,
>     but i need two LAN cards.
>
>
>     ABBAS KHAN wrote:
>
>         Is this the kernel module used for the LAN card driver?
>
>         /*r8169
>
>         */
>
>
>     _______________________________________________
>     CentOS mailing list
>     CentOS at centos.org <mailto:CentOS at centos.org>
>     http://lists.centos.org/mailman/listinfo/centos
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org
> http://lists.centos.org/mailman/listinfo/centos
>