On Fri, 28 Mar 2008 at 2:43pm, Jerry Geis wrote > I have 2 questions dealing with 2 different kickstart files. > > 1) my kickstart sections for RAID disk setup and kickstart reports it cannot > find sda. Why is that. sda is there and works. > > clearpart --all --initlabel > part raid.01 --asprimary --bytes-per-inode=4096 --fstype="raid" --onpart=sda1 Is sda already partitioned? > raid / --bytes-per-inode=4096 --device=md0 --fstype="ext3" --level=1 raid.01 > raid.03 > raid / --bytes-per-inode=4096 --device=md1 --fstype="ext3" --level=1 raid.02 > raid.04 If that's cut and pasted from your ks file, then you're requesting the same partition twice... > 2) my kickstart section for normally single disk setup. However with 2 disks > present in box > it put / on sda and /home on sdb. Is there a way to put it ALL on sda??? If > there is a second disk I want it left alone. > > clearpart --all --initlabel > part / --fstype ext3 --size=20000 --asprimary > part swap --size=4000 --asprimary > part /home --fstype ext3 --size=100 --grow --asprimary Add --ondisk=sda to each line. I refer to http://www.redhat.com/docs/manuals/enterprise/RHEL-5-manual/en-US/RHEL510/Installation_Guide/s1-kickstart2-options.html quite often... -- Joshua Baker-LePain QB3 Shared Cluster Sysadmin UCSF