[CentOS] INIT: Id "snmp" respawning too fast: disabled for 5 minutes

Wed Feb 11 18:55:12 UTC 2009
David Halik <dhalik at jla.rutgers.edu>

Thanks for the reply. I've tried both "init q" and "init u" without any 
luck, the message still appeared five minutes later. Init did post a 
message that it was reloaded, so the command worked, yet the process is 
still complaining about this "snmp" id.

Here's my inittab. It's fairly standard and I don't think any custom 
changes were made.

#
# inittab       This file describes how the INIT process should set up
#               the system in a certain run-level.
#
# Author:       Miquel van Smoorenburg, <miquels at drinkel.nl.mugnet.org>
#               Modified for RHS Linux by Marc Ewing and Donnie Barnes
#

# Default runlevel. The runlevels used by RHS are:
#   0 - halt (Do NOT set initdefault to this)
#   1 - Single user mode
#   2 - Multiuser, without NFS (The same as 3, if you do not have 
networking)
#   3 - Full multiuser mode
#   4 - unused
#   5 - X11
#   6 - reboot (Do NOT set initdefault to this)
#
id:3:initdefault:

# System initialization.
si::sysinit:/etc/rc.d/rc.sysinit

l0:0:wait:/etc/rc.d/rc 0
l1:1:wait:/etc/rc.d/rc 1
l2:2:wait:/etc/rc.d/rc 2
l3:3:wait:/etc/rc.d/rc 3
l4:4:wait:/etc/rc.d/rc 4
l5:5:wait:/etc/rc.d/rc 5
l6:6:wait:/etc/rc.d/rc 6

# Trap CTRL-ALT-DELETE
ca::ctrlaltdel:/sbin/shutdown -t3 -r now

# When our UPS tells us power has failed, assume we have a few minutes
# of power left.  Schedule a shutdown for 2 minutes from now.
# This does, of course, assume you have powerd installed and your
# UPS connected and working correctly. 
pf::powerfail:/sbin/shutdown -f -h +2 "Power Failure; System Shutting Down"

# If power was restored before the shutdown kicked in, cancel it.
pr:12345:powerokwait:/sbin/shutdown -c "Power Restored; Shutdown Cancelled"


# Run gettys in standard runlevels
co:2345:respawn:/sbin/agetty ttyS0 9600 vt100-nav
1:2345:respawn:/sbin/mingetty tty1
2:2345:respawn:/sbin/mingetty tty2
3:2345:respawn:/sbin/mingetty tty3
4:2345:respawn:/sbin/mingetty tty4
5:2345:respawn:/sbin/mingetty tty5
6:2345:respawn:/sbin/mingetty tty6

# Run xdm in runlevel 5
x:5:respawn:/etc/X11/prefdm -nodaemon



Filipe Brandenburger wrote:
> Hi,
>
> On Tue, Feb 10, 2009 at 14:23, David Halik <dhalik at jla.rutgers.edu> wrote:
>   
>> INIT: Id "snmp" respawning too fast: disabled for 5 minutes
>> INIT: Id "snmp" respawning too fast: disabled for 5 minutes
>> INIT: Id "snmp" respawning too fast: disabled for 5 minutes
>>     
>
> What does "grep -i snmp /etc/inittab" say?
>
> If there is really nothing, try "init q" to see if init is still using
> old contents of that file. If that does not help, try "init u" as
> well.
>
> If it still does not fix it, please post the full contents of your
> inittab so that we can help you fix the problem.
>
> HTH,
> Filipe
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org
> http://lists.centos.org/mailman/listinfo/centos
>   


-- 
================================
David Halik
System Administrator
OIT-CSS Rutgers University
dhalik at jla.rutgers.edu
================================