This is my two line on route-eth0 address0=217.20.117.1 subnet0=255.255.255.255 but what should be next line for default gateway the only thing that i could not complete is default gateway setting and my netstat table must looklike this : Destination Gateway Genmask Flags MSS Window irtt Iface 217.20.117.1 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 217.20.117.1 0.0.0.0 UG 0 0 0 eth0 and now i see only the first two line truely i am adding 3rd line on every time restart manually with route add default gw 2010/3/29 Les Mikesell <lesmikesell at gmail.com> > cahit Eyigünlü wrote: > > i am reaching the network with this : > > route add -net 217.20.117.1 netmask 255.255.255.255 dev eth0 > > route add default gw 217.20.117.1 > > > > i have added eth0 > > address0=217.20.117.1 > > subnet0=255.255.255.255 > > > > the first command is ok but how could i set the second command to cent > > os to do it automatically > > > > If you create a file named /etc/sysconfig/network-scripts/route-eth0 you > can put > lines in it that will have 'ip route' added at the beginning and executed > after > the interface is up. "ip route" takes some different arguments than the > "route" > command - see "man ip" for details. > > -- > Les Mikesell > lesmikesell at gmail.com > > > > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20100329/7b8467fc/attachment-0005.html>