2010/3/29 cahit Eyigünlü <cahit.eyigunlu at gmail.com>: > This is my two line on route-eth0 > address0=217.20.117.1 > subnet0=255.255.255.255 > but what should be next line for default gateway the only thing that i could > not complete is default gateway setting > and my netstat table must looklike this : > Destination Gateway Genmask Flags MSS Window irtt > Iface > 217.20.117.1 0.0.0.0 255.255.255.255 UH 0 0 0 > eth0 > xx.xx.xx.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 > 0.0.0.0 217.20.117.1 0.0.0.0 UG 0 0 0 > eth0 > and now i see only the first two line truely i am adding 3rd line on every > time restart manually with route add default gw > > 2010/3/29 Les Mikesell <lesmikesell at gmail.com> >> >> cahit Eyigünlü wrote: >> > i am reaching the network with this : >> > route add -net 217.20.117.1 netmask 255.255.255.255 dev eth0 >> > route add default gw 217.20.117.1 >> > >> > i have added eth0 >> > address0=217.20.117.1 >> > subnet0=255.255.255.255 >> > >> > the first command is ok but how could i set the second command to cent >> > os to do it automatically >> > >> >> If you create a file named /etc/sysconfig/network-scripts/route-eth0 you >> can put >> lines in it that will have 'ip route' added at the beginning and executed >> after >> the interface is up. "ip route" takes some different arguments than the >> "route" >> command - see "man ip" for details. >> >> -- >> Les Mikesell >> lesmikesell at gmail.com >> >> >> >> _______________________________________________ >> CentOS mailing list >> CentOS at centos.org >> http://lists.centos.org/mailman/listinfo/centos > > > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos > > Why don't you post the results of 'ifconfig -a' and 'ip route show'? Giving information piecemeal is not helping anyone.