On 3/29/2010 8:09 AM, cahit Eyigünlü wrote:
> This is my two line on route-eth0
> address0=217.20.117.1
> subnet0=255.255.255.255
> but what should be next line for default gateway the only thing that i
> could not complete is default gateway setting
> and my netstat table must looklike this :
> Destination Gateway Genmask Flags MSS Window irtt
> Iface
> 217.20.117.1 0.0.0.0 255.255.255.255 UH 0 0 0
> eth0
> xx.xx.xx.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
> 0.0.0.0 217.20.117.1 0.0.0.0 UG 0 0 0
> eth0
> and now i see only the first two line truely i am adding 3rd line on
> every time restart manually with route add default gw
>
If you want to use that syntax, you can probably add:
GATEWAY1=217.20.117.1
NETMASK1=0.0.0.0
ADDRESS1=0.0.0.0
Or this should work instead:
default via 217.20.117.1 dev eth0
But, I'd consider looking for a different service provider that does
networking in a more standard way. If they have to overlay subnets,
they could at least assign an IP within each one on the gateway device
so a standard configuration would be able to reach it.
--
Les Mikesell
lesmikesell at gmail.com