GATEWAY1=217.20.117.1 that does not worked 2010/3/29 Les Mikesell <lesmikesell at gmail.com> > On 3/29/2010 8:09 AM, cahit Eyigünlü wrote: > > This is my two line on route-eth0 > > address0=217.20.117.1 > > subnet0=255.255.255.255 > > but what should be next line for default gateway the only thing that i > > could not complete is default gateway setting > > and my netstat table must looklike this : > > Destination Gateway Genmask Flags MSS Window irtt > > Iface > > 217.20.117.1 0.0.0.0 255.255.255.255 UH 0 0 0 > > eth0 > > xx.xx.xx.0 0.0.0.0 255.255.255.0 U 0 0 0 > eth0 > > 0.0.0.0 217.20.117.1 0.0.0.0 UG 0 0 0 > > eth0 > > and now i see only the first two line truely i am adding 3rd line on > > every time restart manually with route add default gw > > > > If you want to use that syntax, you can probably add: > GATEWAY1=217.20.117.1 > NETMASK1=0.0.0.0 > ADDRESS1=0.0.0.0 > > Or this should work instead: > default via 217.20.117.1 dev eth0 > > But, I'd consider looking for a different service provider that does > networking in a more standard way. If they have to overlay subnets, > they could at least assign an IP within each one on the gateway device > so a standard configuration would be able to reach it. > > -- > Les Mikesell > lesmikesell at gmail.com > > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20100329/74612ad5/attachment-0005.html>