Am 10.09.2011 13:40, schrieb John Hodrien: > On Sat, 10 Sep 2011, Janne TH. Nyman wrote: >> These where the steps I took to resolve it: >> >> 1. Start Laptop >> 2. When first boot screen appears, press F1 to get into the BIOS setup >> 3. Go to Config > Serial ATA and change AHCI to Compatibility >> 4. Press F10 to save and reboot > Making sure it was in AHCI mode was the first suggestion you got on the > list... ;) And she changed it from AHCI to compatibility mode (had to change it to that mode to make the drive being recognized?), which is not the best setting regarding speed. > jh Alexander