On Sat, 10 Sep 2011, Alexander Dalloz wrote: > Am 10.09.2011 13:40, schrieb John Hodrien: >> On Sat, 10 Sep 2011, Janne TH. Nyman wrote: > >>> These where the steps I took to resolve it: >>> >>> 1. Start Laptop >>> 2. When first boot screen appears, press F1 to get into the BIOS setup >>> 3. Go to Config > Serial ATA and change AHCI to Compatibility >>> 4. Press F10 to save and reboot > >> Making sure it was in AHCI mode was the first suggestion you got on the >> list... ;) > > And she changed it from AHCI to compatibility mode (had to change it to > that mode to make the drive being recognized?), which is not the best > setting regarding speed. Quite right, sorry, I'd read it backwards. So presumably either a bug in the AHCI support, or a limitation/bug of the kernel driver? jh