On Wed, Apr 11, 2012 at 2:48 PM, John R Pierce <pierce at hogranch.com> wrote: > On 04/11/12 9:36 AM, sri wrote: >> 4) Have you checked if your motherboard IPMI is not pulling an address >> during boot? >> -- Frankly, not sure how to check motherboard IPMI messages. Verified >> dmesg output. Following is the dmesg output. >> Please share any way to check motherboard IPMI is pulling another address? > > well, first, does your motherboard *HAVE* an IPMI management module, and > if so, does it use a dedicated ethernet port, or is it 'piggybacked' on > eth0 ? the behavior shown could be the latter. > > I'd look in the system or motherboard documentation for this... > depending on the IPMI module, it may have a web or ssh interface, or it > may require another system contact it via an 'ipmitool' of some sort. > It probably has an initial user/pass like admin/admin which should be > reconfigured during system configuration and deployment. There might be an option in the bios setup to disable IPMI or give it a static address. And are you really sure it is from this machine? If you disconnect/shut down, do both IP's stop responding? If you can't trace the wiring from the switch port you are checking to the host, maybe there is an intermediate switch/hub with some other device. -- Les Mikesell lesmikesell at gmail.com