Hi, I do have one iscsi storage with 4 GBit nics of which currently only one is configured with an ip and which is in productive use by one cent os 6.3 server. Doing some research brought me to the idea to use some nic bonding or multipathing for that storage, but multipathing I did about four or five years ago only once :) Furthormore I can't find the ultimate answer (may be there is not such) what will be better for us: bonding or multipathing. The storage is used for backup; it's connected to an backupserver which pulls data from different servers ... may be at the same time or one after an other. The server uses two bonded nics to the LAN. My question regarding the setup is, what might be good or better: bonding or multipathing. We'd like to increase performance and nic failover if one link breaks. If multipathing is to be preferred, is it possible to preserve the data currently saved on the storages ext4? And googling shows up a lot of different how tos and the redhat doc; but I din not found one describing a straight forward setup. So thanks a lot for any suggestion or comments! Regards . Götz -- Götz Reinicke IT-Koordinator Tel. +49 7141 969 82 420 Fax +49 7141 969 55 420 E-Mail goetz.reinicke at filmakademie.de Filmakademie Baden-Württemberg GmbH Akademiehof 10 71638 Ludwigsburg www.filmakademie.de Eintragung Amtsgericht Stuttgart HRB 205016 Vorsitzender des Aufsichtsrats: Jürgen Walter MdL Staatssekretär im Ministerium für Wissenschaft, Forschung und Kunst Baden-Württemberg Geschäftsführer: Prof. Thomas Schadt