[CentOS] OT: LSI SAS1068e / Perc6/iR RAID Health

Fri Feb 15 20:16:40 UTC 2013
Todor Petkov <zakk at online.bg>

On 15/02/2013 09:08 PM, SilverTip257 wrote:
> Is anybody here monitoring Dell SAS6/iR RAID health?
> I have a mix of CentOS 5.9 and 6.3 installs on the PE1950s.
>
> I'm finding drivers and Megaraid Storage Manager downloads via LSI's 
> site,
> but I'd prefer not to install a bunch of crapware.  All I need is the
> proper LSI daemon which exports info via SNMP.
>
> I've used check_sasraid_megaraid Nagios script [0] in the past for 
> PERC5i
> and PERC6i controllers in Dell PE2950s.  For 2950s I've only had to
> install sas_snmp-3.11-0003.i386.rpm from LSI to get rolling.
>
> I've tried installing parts from the MSM zip/tarball mess to install 
> only
> the lsi_mrdsnmpd daemon (lsi_mrdsnmpagent).
>
> PERC5i = LSI 8048e (megaraid)
> PERC6i = LSI SAS 1078 (megaraid)
> SAS6/iR = LSI SAS 1068e (mptfusion)
>
> [0] http://wleibzon.bol.ucla.edu/nagios/
> [1] 
> http://lists.centos.org/pipermail/centos/2009-November/085215.html
>
>
> Thanks for any nudges in the right direction.


You can try megasasctl from this package 
http://sourceforge.net/projects/megactl/ and do some script, which is 
used by snmpd to check the output.



Regards,