[CentOS] OT: LSI SAS1068e / Perc6/iR RAID Health

Fri Feb 15 20:49:44 UTC 2013
SilverTip257 <silvertip257 at gmail.com>

On Fri, Feb 15, 2013 at 3:16 PM, Todor Petkov <zakk at online.bg> wrote:

> On 15/02/2013 09:08 PM, SilverTip257 wrote:
> > Is anybody here monitoring Dell SAS6/iR RAID health?
> > I have a mix of CentOS 5.9 and 6.3 installs on the PE1950s.
> >
> > I'm finding drivers and Megaraid Storage Manager downloads via LSI's
> > site,
> > but I'd prefer not to install a bunch of crapware.  All I need is the
> > proper LSI daemon which exports info via SNMP.
> >
> > I've used check_sasraid_megaraid Nagios script [0] in the past for
> > PERC5i
> > and PERC6i controllers in Dell PE2950s.  For 2950s I've only had to
> > install sas_snmp-3.11-0003.i386.rpm from LSI to get rolling.
> >
> > I've tried installing parts from the MSM zip/tarball mess to install
> > only
> > the lsi_mrdsnmpd daemon (lsi_mrdsnmpagent).
> >
> > PERC5i = LSI 8048e (megaraid)
> > PERC6i = LSI SAS 1078 (megaraid)
> > SAS6/iR = LSI SAS 1068e (mptfusion)
> >
> > [0] http://wleibzon.bol.ucla.edu/nagios/
> > [1]
> > http://lists.centos.org/pipermail/centos/2009-November/085215.html
> >
> >
> > Thanks for any nudges in the right direction.
>
>
> You can try megasasctl from this package
> http://sourceforge.net/projects/megactl/ and do some script, which is
> used by snmpd to check the output.
>
>
Thanks - I'll look into it.

Not as nice as the lsi daemon though and having to re-author a Nagios
script.


>
>
> Regards,
>
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org
> http://lists.centos.org/mailman/listinfo/centos
>

-- 
---~~.~~---
Mike
//  SilverTip257  //