Robert Benjamin wrote: > On 3/27/2013 1:04 PM, Les Mikesell wrote: >> On Wed, Mar 27, 2013 at 8:07 AM, Robert Benjamin <benjie1 at cox.net> >> wrote: >>>> If you can log in and use an editor in character mode you can fix it. >>>> The change needed in /etc/sysconfig/network-scripts/ifcfg-eth0 will <snip> >>> won't install on reboot. Post number 27 or 28 lists the output I got >>> from FAQ2 above from cat /etc /sysconfig/network-scripts/ifcfg-eth0 My >>> guess is the most important line there is ONBOOT=yes Anyway, there are >>> suggestions in the forum which I will follow and then post the results >>> back to the forum. Thanks again. >> Yes, the ONBOOT=yes is already there. However, some of the other >> parts of that thread make me think that your network interface >> actually comes up but you are not getting a DHCP address or the DHCP >> server supplies a DNS server address that does not work. These would >> usually be supplied by your internet router. Are you confident that >> it is set up correctly? <snip> Quick question - I missed the very beginning: what does ethtool eth0 show? Is there a link? Or does this have em1? mark