[CentOS] Help with thread Centos 6.4 won't reboot on install

Wed Mar 27 17:52:19 UTC 2013
Les Mikesell <lesmikesell at gmail.com>

On Wed, Mar 27, 2013 at 12:32 PM, Robert Benjamin <benjie1 at cox.net> wrote:
>
>> The reason I think this is the problem is the post where you said you
>> could log in after a very long delay.  About the only thing that can
>> cause a very long delay is the system waiting for DNS responses on
>> what it thinks is a working network interface.   The next things
>> needed for further diagnosis would be the output of the 'ifconfig'
>> command after you are able to log in, and the results from 'cat
>> /etc/resolv.conf.   The first should show the IP address assigned by
>> DHCP from the router, and the second will have the DNS nameserver
>> address(es).
>      In the last post on the forum is the output of ifconfig. It closely
> resembles what was shown there and stated that my output should resemble
> the one already there in post 29 ,and it does. There was no suggestion
> to try cat /etc/reslov.conf. Can do that from the root login. Will wait
> til I get a reply from the forum. Plenty of suggestions from here and
> the forum and I'll keep up with both. The delay was almost an hour BTW.
> Thanks again. The router works perfectly fine and quickly for win 7,
> Ubuntu 12.2 and Mint 14.

The IP address looks like what you would get from a typical home
router, so that's probably OK.  A quick test for DNS would be the
'dig' command.  If it quickly returns a screenfull of  root
nameservers and addresses, then DNS is not the problem.    If it
doesn't, then check what you have in your /etc/resolv.conf file.

-- 
   Les Mikesell
      lesmikesell at gmail.com