m.roth at 5-cent.us wrote: > I just updated a server that's running CentOS 7. I do have elrepo enabled, > because this Rave computer has four early Tesla cards. > > It won't boot. Nor can I get it to boot with either of the other two > kernels, and I'll be the one that worked was erased. > > *Once* it complained that it couldn't fsck the large filesystem (IIRC, > it's XFS). The other four-five times, I get pNFS something Dependency, > failed, systemd freezing execution. > > So far, I'm googling, and not finding anything like this. Has anyone run > into this, or have any suggestions? > > If I could get back to the fsck failure, I could at least tell it to > ignore /dev/sdb.... > This is more complex... I have two drives in this system. I've got one that holds the CentOS 7 install, and one with 6.6. The one with the 7 is in hot swap bay 1, while the other's in bay 2. With both of them in there, it goes to boot off what I would expect to be enumerated as hd1; instead, it seems to see it as hd0. When I pull out the drive with 6, 7 boots just fine. The drive with 6, of course, has grub, while the one with 7 has grub2. Any ideas as to how I can get it to work with the correct drive? mark