You need NAT setup on the server. ZK > On Jun 28, 2015, at 2:50 PM, Max Pyziur <pyz at brama.com> wrote: > > > Greetings, > > I'm rebuilding a machine to function as a gateway/router to Verizon DSL. > > It has two NICs eth0 and eth1 (static set to 192.168.1.1). > > eth0 connects to the DSL modem. > > I've setup Verizon DSL usine pppoe-setup, and it works. > > > I can connect from home machines to the server (192.168.1.1); while logged in to the server, I can connect to both the internet, and the home machines. > > But ... > > I can't connect from the home machines directly to the Internet. > > I have set > net.ipv4.ip_forward = 1 > in /etc/sysctl.conf > > I haven't setup the firewall yet (dangerous, I know) until I get the connectivity working. > > I'm obviously overlooking some other configuration settings required for machines inside the network being able to connect through the gateway/router. > > Thanks for any advice in advance. > > > Max Pyziur > pyz at brama.com > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos