Hi all,
We are hitting an error in the centos 7 installation with our
kickstart configuration.
===============================================================================
An unknown error has occurred
===============================================================================
anaconda 21.48.22.56-1 exception report
Traceback (most recent call first):
File "/usr/lib/python2.7/site-packages/blivet/devicelibs/lvm.py",
line 538, in lvactivate
raise LVMError("lvactivate failed for %s: %s" % (lv_name, msg))
File "/usr/lib/python2.7/site-packages/blivet/devices/lvm.py", line
690, in _setup
lvm.lvactivate(self.vg.name, self._name)
File "/usr/lib/python2.7/site-packages/blivet/devices/storage.py",
line 413, in setup
self._setup(orig=orig)
File "/usr/lib/python2.7/site-packages/blivet/deviceaction.py", line
650, in execute
self.device.setup(orig=True)
File "/usr/lib/python2.7/site-packages/blivet/devicetree.py", line
377, in processActions
action.execute(callbacks)
File "/usr/lib/python2.7/site-packages/blivet/__init__.py", line 374, in doIt
self.devicetree.processActions(callbacks)
File "/usr/lib/python2.7/site-packages/blivet/__init__.py", line
224, in turnOnFilesystems
storage.doIt(callbacks)
File "/usr/lib64/python2.7/site-packages/pyanaconda/install.py",
line 186, in doInstall
turnOnFilesystems(storage, mountOnly=flags.flags.dirInstall,
callbacks=callbacks_reg)
File "/usr/lib64/python2.7/threading.py", line 764, in run
self.__target(*self.__args, **self.__kwargs)
File "/usr/lib64/python2.7/site-packages/pyanaconda/threads.py",
line 227, in run
threading.Thread.run(self, *args, **kwargs)
LVMError: lvactivate failed for swap: running lvm lvchange -a y
--config devices { preferred_names=["^/dev/mapper/", "^/dev/md/",
"^/dev/sd"] } redhat/swap failed
Kickstart:-
#version=RHEL7
# System authorization information
auth --enableshadow --passalgo=sha512
# Use CDROM installation media
cdrom
# Run the Setup Agent on first boot
firstboot --enable
ignoredisk --only-use=vda
# Keyboard layouts
keyboard --vckeymap=us --xlayouts='us'
network --device eth0 --bootproto static --ip 10.97.60.50 --netmask
255.255.255.0 --gateway 10.97.60.254 --nameserver 10.97.2.1 --noipv6
# System language
lang en_US.UTF-8
# System timezone
timezone America/Los_Angeles
# Network information
#network --bootproto=dhcp --device=eno1 --onboot=yes --ipv6=auto
#network --bootproto=dhcp --device=eno2 --onboot=yes --ipv6=auto
#network --bootproto=dhcp --device=enp4s0f0 --onboot=yes --ipv6=auto
#network --bootproto=dhcp --device=enp4s0f1 --onboot=yes --ipv6=auto
#network --bootproto=dhcp --device=enp4s0f2 --onboot=yes --ipv6=auto
#network --bootproto=dhcp --device=enp4s0f3 --onboot=yes --ipv6=auto
#network --bootproto=dhcp --device=enp7s0f0 --onboot=yes --ipv6=auto
#network --bootproto=dhcp --device=enp7s0f1 --onboot=yes --ipv6=auto
#network --hostname=localhost.localdomain
# Reboot after installation
reboot
# Root password
#rootpw --iscrypted
$6$1VdyMsGywTam2QoF$h9G0RZJlZ8etF8LMvjT8LBuYoRkWfP3nXSP8UrNtW6gV/gHCjdUbnMDca.St2NVftNz5rJ5bZ/FgvLky2j2TG1
rootpw "root"
# Create user admin
user --groups=wheel --name=admin
--password=$6$zVk6Jq/HtswVONHY$0frpMHx1IBOe302zYnhdo9xRQS6NOgBWgpXpH33k3dNYkHm1jCo6Cj.SXn9Ct/BugC.0iTkwBsX.NcpVtocc70
--iscrypted --shell=/sbin/nologin
# Partitioning and System bootloader configuration
bootloader --append=" crashkernel=auto" --location=mbr --boot-drive=vda
autopart --type=lvm
clearpart --all --initlabel
%packages
<list of packages>
%end
Can somebody suggest a quick workaround for the above anaconda error.
We feel that Red hat has acknowledged this issue, but not sure, when
can we get the fix for this.
https://access.redhat.com/solutions/2203631
Is there any workaround for this?
Regards
Sudhanshu bhutani