[CentOS] Problems with kernel-3.10.0-693.5.2.el7.x86_64
Gregory P. Ennis
PoMec at PoMec.Net
Sun Oct 29 16:38:12 UTC 2017
On 10/28/2017 02:55 PM, Gregory P. Ennis wrote:
> Date: Sat, 28 Oct 2017 12:03:51 -0700
>
> On 10/28/2017 11:30 AM, Gregory P. Ennis wrote:
> > On each of these units I am using the video from the mother board
> > which
> > is :
> >
> > Base Board Information
> > Manufacturer: ASUSTeK COMPUTER INC.
> > Product Name: B150M-A/M.2
>
>
> what CPU are you using? any onboard video with the B150 chipset is
> coming from the CPU itself.
> -------------------------------
>
> John,
>
> Thanks for your help.
>
> Sorry, I thought I posted that earlier, but it is :
>
> Intel(R) Core(TM) i7-7700 CPU @ 3.60GHz
>
OK .. if you run this as root, it will tell you what the actual video
card is what what driver and/or kernel module is in use:
for card in $(lspci | grep ' VGA ' | cut -d" " -f 1); do \
lspci -v -s $card; done
Here is an example output for my workstation:
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core
Processor Integrated Graphics Controller (rev 06) (prog-if 00 [VGA
controller])
Subsystem: Lenovo Device 221e
Flags: bus master, fast devsel, latency 0, IRQ 30
Memory at b3400000 (64-bit, non-prefetchable) [size=4M]
Memory at 80000000 (64-bit, prefetchable) [size=512M]
I/O ports at 5000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [d0] Power Management version 2
Capabilities: [a4] PCI Advanced Features
Kernel driver in use: i915
Kernel modules: i915
01:00.0 VGA compatible controller: NVIDIA Corporation GK107GLM [Quadro
K1100M] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device 221e
Flags: fast devsel, IRQ 255
Memory at b2000000 (32-bit, non-prefetchable) [disabled]
[size=16M]
Memory at a0000000 (64-bit, prefetchable) [disabled]
[size=256M]
Memory at b0000000 (64-bit, prefetchable) [disabled] [size=32M]
I/O ports at 4000 [disabled] [size=128]
Expansion ROM at b3000000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1
Len=024 <?>
Capabilities: [900] #19
Kernel modules: nouveau
With that info, you can troubleshoot the specific driver or kernel
module.
_______________________________________________
CentOS mailing list
CentOS at centos.org
https://lists.centos.org/mailman/listinfo/centos
Johnny,
Thank you again for your help. As I mentioned before, I do not have a
video card on either of these machines, just the mother board along
with the cpu.
Here is the result of 'lspci -v -s 00:02.0' on both machines :
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 630
(rev 04) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device 8694
Flags: bus master, fast devsel, latency 0, IRQ 125
Memory at f6000000 (64-bit, non-prefetchable) [size=16M]
Memory at e0000000 (64-bit, prefetchable) [size=256M]
I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [40] Vendor Specific Information: Len=0c <?>
Capabilities: [70] Express Root Complex Integrated Endpoint,MSI 00
Capabilities: [ac] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [d0] Power Management version 2
Capabilities: [100] Process Address Space ID (PASID)
Capabilities: [200] Address Translation Service (ATS)
Capabilities: [300] Page Request Interface (PRI)
Kernel driver in use: i915
Kernel modules: i915
Greg
--------------------------------------------------------
Johnny,
After doing some google searches I found the results of
'hwinfo --gfxcard'
on both machines (with some small differences) to be :
08: PCI 02.0: 0300 VGA compatible controller (VGA)
[Created at pci.319]
Unique ID: _Znp.1+PvSl89UWD
SysFS ID: /devices/pci0000:00/0000:00:02.0
SysFS BusID: 0000:00:02.0
Hardware Class: graphics card
Model: "Intel VGA compatible controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x5912
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x8694
Revision: 0x04
Driver: "i915"
Driver Modules: "i915"
Memory Range: 0xf6000000-0xf6ffffff (rw,non-prefetchable)
Memory Range: 0xe0000000-0xefffffff (ro,non-prefetchable)
I/O Ports: 0xf000-0xf03f (rw)
IRQ: 125 (16435 events)
Module Alias: "pci:v00008086d00005912sv00001043sd00008694bc03sc00i00"
Driver Info #0:
Driver Status: i915 is active
Driver Activation Cmd: "modprobe i915"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Primary display adapter: #8
Greg
More information about the CentOS
mailing list