Scott Silverman wrote: > On Tue, Jul 10, 2018 at 12:37 PM, mark <m.roth at 5-cent.us> wrote: > >> I've got a box running C7, just updated (yesterday). It had an onboard >> RAID controller, and an HBA. I just installed a new, additional RAID >> card, all LSI. >> >> MegaCli64 only sees one controller. I can't seem to find the magic to >> see the others. I *know* the new card is a MegaRAID - the box it came in >> says so. The system sees it 1:00.0 RAID bus controller: LSI Logic / >> Symbios Logic SAS1078 PCI-Express >> Fusion-MPT SAS (rev 04) >> 42:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS-3 >> 3108 >> [Invader] (rev 02) >> 43:00.0 Serial Attached SCSI controller: LSI Logic / Symbios Logic >> SAS3008 >> PCI-Express Fusion-MPT SAS-3 (rev 02) >> >> I've connected a RAID box that we had to it. I'm trying to import the >> foreign configuration and bring it online. I really can't reboot the >> system for (literally) another month (the maintenance window); I saw >> the firmware interface, but for Reasons, couldn't do it then, and >> figured I'd be able to to it with MegaCli64, but so far, nope. >> -AdpAllinfo gets only >> one. >> >> Clues? Please don't top post. > I would try the newer storcli utility instead of megacli. > Is there a std. repo for it, or is it from that guy's website? mark