On 10/3/19 1:24 PM, Günther J. Niederwimmer wrote: > Hello, > > Am Donnerstag, 3. Oktober 2019, 01:10:58 CEST schrieb Akemi Yagi: >> On Wed, Oct 2, 2019 at 3:35 PM Günther J. Niederwimmer <gjn at gjn.priv.at> > wrote: >>> This Board have 2 Controller!° >>> 00:1f.2 RAID bus controller: Intel Corporation C600/X79 series chipset >>> SATA >>> RAID Controller (rev 06) >>> >>> On this controller all drives are found and it is possible to create a >>> Raid1! >>> >>> 07:00.0 Serial Attached SCSI controller: Intel Corporation C602 chipset >>> 4-Port SATA Storage Control Unit (rev 06) >>> >>> But on this Contoller NO drives found? >> >> If you provide the device ID pairing [xxxx:yyyy] for the one that is >> not working, it will become clear. Can you show us the output from: >> >> lspci -nn >> >> Is it this one? >> >> Serial Attached SCSI controller [0107]: Intel Corporation C602 chipset >> 4-Port SATA Storage Control Unit [8086:1d6b] >> >> If so, the above device ID [8086:1d6b] is not supported in RHEL/CentOS >> 8, unfortunately. > > ?? > Yes, I Have :-( > > 07:00.0 Serial Attached SCSI controller [0107]: Intel Corporation C602 chipset > 4-Port SATA Storage Control Unit [8086:1d6b] (rev 06)? > > what is the Problem with this chipset and why it is no longer supported ?? https://elrepoproject.blogspot.com/2019/08/rhel-80-and-support-for-removed-adapters.html > > This Board is 4 year old and now??? > > I mean it is in many server boards. > -- Ljubomir Ljubojevic (Love is in the Air) PL Computers Serbia, Europe StarOS, Mikrotik and CentOS/RHEL/Linux consultant