Arm-dev December 2015

arm-dev@lists.centos.org

21 participants
33 discussions

making a .img from a mSD card
by Robert Moskowitz 29 Dec '15

29 Dec '15

It takes me an hour to get an mSD card up to my 'clean point'. Everytime I want to step back, it is a lot of steps. So I went looking for my old notes on making a .img from a mSD with dd (I think) and coming up empty. Can some one point me to where I can find how to do this? I am doing something wrong with postfixadmin. And I want to step back and try again...

3 5

UUID for partitions
by Robert Moskowitz 29 Dec '15

29 Dec '15

It looks like the UUIDs for the partitions are set. This only makes sense. cat /etc/fstab #Generated by RootFS Build Factory UUID=fa926fa0-ddcb-47ea-9731-ea5c92d9f959 /boot ext3 noatime 0 0 UUID=6d5e843e-7dd8-4d70-a08e-4ee9d26828d7 swap swap noatime 0 0 UUID=770af0f9-c7d9-4ae9-b024-1ba3c78d7550 / ext4 noatime 0 0 Does this matter? Should some script change the UUIDs for each installation?

4 27

How to deal with no battery for clock
by Robert Moskowitz 28 Dec '15

28 Dec '15

Here is how I have worked out to deal with my boards not having a battery for the clock. After firstboot login as root. This is the FIRST thing I do, even before changing root's password so that timestamps are good going forward. date mmddhhmmyyyy #where hhmm is UTC time. timedatectl set-timezone <timezone> #(for me that is America/Detroit) date # to check that I have done things right. Now I can do what ever must first things to do, like change root's password. And the last step is: yum install chrony Now some short time for all future boots after the network comes up, chrony will adjust the system time correctly. This may be as good as it gets until/unless chrony comes in as part of the minimal image.

1 0

Bind working
by Robert Moskowitz 25 Dec '15

25 Dec '15

Took a bit, but I have bind up and running on a Cubieboard2. I did my 'base' set up. I am getting better at this. I installed bind and bind-utils I scp all my conf files for my internal DNS test server into /etc, /etc/named and /var/named Fixed ownership (root:named where needed) and restarted named. Checked status and it shows everything loaded. Then tested rndc and could reload zones. I am going to wait until probably tues next week before rolling this into production. I am a little short of HD and have to shuffle them around. Watching for sales on unused 80Gb sata drives. Once got some for $10 and did not buy enough. Typical current price is $20. I won't update my production DNS server until C7-arm goes official. Just in case. Next though, is to start fiddling with my mail setup on a Cubietruck. This will be a test of a lot of software...

1 0

reset network kills network
by david 24 Dec '15

24 Dec '15

Folks I'm playing with a Raspberry Pi 2 and Centos. Here are some issues I've bumped into. I'm not sure this is the right medium for commenting; please correct me if needed. I wrote a copy of the distributed image (1151) to my MicroSD card, then turned on the Rpi2. Issue 1: Even though my DHCP server was configured to give the node a name, it showed up as "rpi2" as the host name. Issue 2: Network works, but if I issue the command systemctl reset network the command fails and I haven't found a way to get the network back. I saved the output of "journalctl -ce", rebooted, and installed "ftp" so I could copy the data to a real machine. The text is as below. I issued the "systemctl reset network" command towards the bottom, where you see the time jump from 00:01:01 to 00:02:28 -------------------------------------------------------------- -- Logs begin at Thu 1970-01-01 00:00:04 UTC, end at Thu 1970-01-01 00:02:28 UTC. -- Jan 01 00:00:04 rpi2 systemd-journal[81]: Runtime journal is using 5.7M (max allowed 46.3M, trying to leave 69.4M free of 457.1M available ? current limit 46.3M). Jan 01 00:00:04 rpi2 systemd-journal[81]: Runtime journal is using 5.7M (max allowed 46.3M, trying to leave 69.4M free of 457.1M available ? current limit 46.3M). Jan 01 00:00:04 rpi2 kernel: Booting Linux on physical CPU 0xf00 Jan 01 00:00:04 rpi2 kernel: Initializing cgroup subsys cpuset Jan 01 00:00:04 rpi2 kernel: Initializing cgroup subsys cpu Jan 01 00:00:04 rpi2 kernel: Initializing cgroup subsys cpuacct Jan 01 00:00:04 rpi2 kernel: Linux version 4.1.11-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.8.3 20140303 (prerelease) (crosstool-NG linaro-1.13.1+bzr2650 - Linaro GCC 2014.03) ) #822 SMP PREEMPT Fri Oct 23 16:22:18 BST 2015 Jan 01 00:00:04 rpi2 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d Jan 01 00:00:04 rpi2 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Jan 01 00:00:04 rpi2 kernel: Machine: BCM2709 Jan 01 00:00:04 rpi2 kernel: cma: Reserved 8 MiB at 0x3a800000 Jan 01 00:00:04 rpi2 kernel: Memory policy: Data cache writealloc Jan 01 00:00:04 rpi2 kernel: On node 0 totalpages: 241664 Jan 01 00:00:04 rpi2 kernel: free_area_init_node: node 0, pgdat 80859000, node_mem_map b9fa6000 Jan 01 00:00:04 rpi2 kernel: Normal zone: 2124 pages used for memmap Jan 01 00:00:04 rpi2 kernel: Normal zone: 0 pages reserved Jan 01 00:00:04 rpi2 kernel: Normal zone: 241664 pages, LIFO batch:31 Jan 01 00:00:04 rpi2 kernel: [bcm2709_smp_init_cpus] enter (9420->f3003010) Jan 01 00:00:04 rpi2 kernel: [bcm2709_smp_init_cpus] ncores=4 Jan 01 00:00:04 rpi2 kernel: PERCPU: Embedded 13 pages/cpu @b9f6d000 s20608 r8192 d24448 u53248 Jan 01 00:00:04 rpi2 kernel: pcpu-alloc: s20608 r8192 d24448 u53248 alloc=13*4096 Jan 01 00:00:04 rpi2 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Jan 01 00:00:04 rpi2 kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 239540 Jan 01 00:00:04 rpi2 kernel: Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1872 bcm2708_fb.fbheight=1168 bcm2709.boardrev=0xa21041 bcm2709.serial=0x72e14965 smsc95xx.macaddr=B8:27:EB:E1:49:65 bcm2708_fb.fbswap=1 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p3 rootfstype=ext4 elevator=deadline rootwait Jan 01 00:00:04 rpi2 kernel: PID hash table entries: 4096 (order: 2, 16384 bytes) Jan 01 00:00:04 rpi2 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Jan 01 00:00:04 rpi2 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Jan 01 00:00:04 rpi2 kernel: Memory: 939572K/966656K available (5955K kernel code, 534K rwdata, 1644K rodata, 416K init, 757K bss, 18892K reserved, 8192K cma-reserved) Jan 01 00:00:04 rpi2 kernel: Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xbb800000 - 0xff000000 (1080 MB) lowmem : 0x80000000 - 0xbb000000 ( 944 MB) modules : 0x7f000000 - 0x80000000 ( 16 MB) .text : 0x80008000 - 0x80773e88 (7600 kB) .init : 0x80774000 - 0x807dc000 ( 416 kB) .data : 0x807dc000 - 0x80861b6c ( 535 kB) .bss : 0x80864000 - 0x8092179c ( 758 kB) Jan 01 00:00:04 rpi2 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Jan 01 00:00:04 rpi2 kernel: Preemptible hierarchical RCU implementation. Jan 01 00:00:04 rpi2 kernel: Additional per-CPU info printed with stalls. Jan 01 00:00:04 rpi2 kernel: NR_IRQS:608 Jan 01 00:00:04 rpi2 kernel: Architected cp15 timer(s) running at 19.20MHz (phys). Jan 01 00:00:04 rpi2 kernel: clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns Jan 01 00:00:04 rpi2 kernel: sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns Jan 01 00:00:04 rpi2 kernel: Switching to timer-based delay loop, resolution 52ns Jan 01 00:00:04 rpi2 kernel: Console: colour dummy device 80x30 Jan 01 00:00:04 rpi2 kernel: console [tty1] enabled Jan 01 00:00:04 rpi2 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) Jan 01 00:00:04 rpi2 kernel: pid_max: default: 32768 minimum: 301 Jan 01 00:00:04 rpi2 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) Jan 01 00:00:04 rpi2 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) Jan 01 00:00:04 rpi2 kernel: Initializing cgroup subsys blkio Jan 01 00:00:04 rpi2 kernel: Initializing cgroup subsys memory Jan 01 00:00:04 rpi2 kernel: Initializing cgroup subsys devices Jan 01 00:00:04 rpi2 kernel: Initializing cgroup subsys freezer Jan 01 00:00:04 rpi2 kernel: Initializing cgroup subsys net_cls Jan 01 00:00:04 rpi2 kernel: CPU: Testing write buffer coherency: ok Jan 01 00:00:04 rpi2 kernel: ftrace: allocating 20224 entries in 60 pages Jan 01 00:00:04 rpi2 kernel: missing device node for CPU 0 Jan 01 00:00:04 rpi2 kernel: missing device node for CPU 1 Jan 01 00:00:04 rpi2 kernel: missing device node for CPU 2 Jan 01 00:00:04 rpi2 kernel: missing device node for CPU 3 Jan 01 00:00:04 rpi2 kernel: CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00 Jan 01 00:00:04 rpi2 kernel: [bcm2709_smp_prepare_cpus] enter Jan 01 00:00:04 rpi2 kernel: Setting up static identity map for 0x8240 - 0x8274 Jan 01 00:00:04 rpi2 kernel: [bcm2709_boot_secondary] cpu:1 started (0) 16 Jan 01 00:00:04 rpi2 kernel: [bcm2709_secondary_init] enter cpu:1 Jan 01 00:00:04 rpi2 kernel: CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01 Jan 01 00:00:04 rpi2 kernel: [bcm2709_boot_secondary] cpu:2 started (0) 18 Jan 01 00:00:04 rpi2 kernel: [bcm2709_secondary_init] enter cpu:2 Jan 01 00:00:04 rpi2 kernel: CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02 Jan 01 00:00:04 rpi2 kernel: [bcm2709_boot_secondary] cpu:3 started (0) 18 Jan 01 00:00:04 rpi2 kernel: [bcm2709_secondary_init] enter cpu:3 Jan 01 00:00:04 rpi2 kernel: CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03 Jan 01 00:00:04 rpi2 kernel: Brought up 4 CPUs Jan 01 00:00:04 rpi2 kernel: SMP: Total of 4 processors activated (153.60 BogoMIPS). Jan 01 00:00:04 rpi2 kernel: CPU: All CPU(s) started in HYP mode. Jan 01 00:00:04 rpi2 kernel: CPU: Virtualization extensions available. Jan 01 00:00:04 rpi2 kernel: devtmpfs: initialized Jan 01 00:00:04 rpi2 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 Jan 01 00:00:04 rpi2 kernel: clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Jan 01 00:00:04 rpi2 kernel: pinctrl core: initialized pinctrl subsystem Jan 01 00:00:04 rpi2 kernel: NET: Registered protocol family 16 Jan 01 00:00:04 rpi2 kernel: DMA: preallocated 4096 KiB pool for atomic coherent allocations Jan 01 00:00:04 rpi2 kernel: bcm2709.uart_clock = 3000000 Jan 01 00:00:04 rpi2 kernel: of_platform_populate failed: -22 Jan 01 00:00:04 rpi2 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Jan 01 00:00:04 rpi2 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes. Jan 01 00:00:04 rpi2 kernel: Serial: AMBA PL011 UART driver Jan 01 00:00:04 rpi2 kernel: dev:f1: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev3 Jan 01 00:00:04 rpi2 kernel: console [ttyAMA0] enabled Jan 01 00:00:04 rpi2 kernel: bcm2835-mbox bcm2835-mbox: mailbox enabled Jan 01 00:00:04 rpi2 kernel: bcm2708-dmaengine bcm2708-dmaengine: DMA legacy API manager at f3007000, dmachans=0x7f35 Jan 01 00:00:04 rpi2 kernel: bcm2708-dmaengine bcm2708-dmaengine: failed to get irq for DMA channel 13 Jan 01 00:00:04 rpi2 kernel: bcm2708-dmaengine bcm2708-dmaengine: Initialized 8 DMA channels (+ 1 legacy) Jan 01 00:00:04 rpi2 kernel: bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driver Jan 01 00:00:04 rpi2 kernel: bcm2708-dmaengine bcm2708-dmaengine: dma_debug:0 Jan 01 00:00:04 rpi2 kernel: SCSI subsystem initialized Jan 01 00:00:04 rpi2 kernel: usbcore: registered new interface driver usbfs Jan 01 00:00:04 rpi2 kernel: usbcore: registered new interface driver hub Jan 01 00:00:04 rpi2 kernel: usbcore: registered new device driver usb Jan 01 00:00:04 rpi2 kernel: raspberrypi-firmware raspberrypi-firmware.0: Attached to firmware from 2015-10-23 16:24 Jan 01 00:00:04 rpi2 kernel: Switched to clocksource arch_sys_counter Jan 01 00:00:04 rpi2 kernel: FS-Cache: Loaded Jan 01 00:00:04 rpi2 kernel: CacheFiles: Loaded Jan 01 00:00:04 rpi2 kernel: NET: Registered protocol family 2 Jan 01 00:00:04 rpi2 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes) Jan 01 00:00:04 rpi2 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes) Jan 01 00:00:04 rpi2 kernel: TCP: Hash tables configured (established 8192 bind 8192) Jan 01 00:00:04 rpi2 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes) Jan 01 00:00:04 rpi2 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) Jan 01 00:00:04 rpi2 kernel: NET: Registered protocol family 1 Jan 01 00:00:04 rpi2 kernel: RPC: Registered named UNIX socket transport module. Jan 01 00:00:04 rpi2 kernel: RPC: Registered udp transport module. Jan 01 00:00:04 rpi2 kernel: RPC: Registered tcp transport module. Jan 01 00:00:04 rpi2 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module. Jan 01 00:00:04 rpi2 kernel: bcm2708_gpio: bcm2708_gpio_probe 80800a68 Jan 01 00:00:04 rpi2 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes) Jan 01 00:00:04 rpi2 kernel: VFS: Disk quotas dquot_6.6.0 Jan 01 00:00:04 rpi2 kernel: VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jan 01 00:00:04 rpi2 kernel: FS-Cache: Netfs 'nfs' registered for caching Jan 01 00:00:04 rpi2 kernel: NFS: Registering the id_resolver key type Jan 01 00:00:04 rpi2 kernel: Key type id_resolver registered Jan 01 00:00:04 rpi2 kernel: Key type id_legacy registered Jan 01 00:00:04 rpi2 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) Jan 01 00:00:04 rpi2 kernel: io scheduler noop registered Jan 01 00:00:04 rpi2 kernel: io scheduler deadline registered (default) Jan 01 00:00:04 rpi2 kernel: io scheduler cfq registered Jan 01 00:00:04 rpi2 kernel: BCM2708FB: allocated DMA memory fac00000 Jan 01 00:00:04 rpi2 kernel: BCM2708FB: allocated DMA channel 0 @ f3007000 Jan 01 00:00:04 rpi2 kernel: Console: switching to colour frame buffer device 234x73 Jan 01 00:00:04 rpi2 kernel: Serial: 8250/16550 driver, 0 ports, IRQ sharing disabled Jan 01 00:00:04 rpi2 kernel: vc-cma: Videocore CMA driver Jan 01 00:00:04 rpi2 kernel: vc-cma: vc_cma_base = 0x00000000 Jan 01 00:00:04 rpi2 kernel: vc-cma: vc_cma_size = 0x00000000 (0 MiB) Jan 01 00:00:04 rpi2 kernel: vc-cma: vc_cma_initial = 0x00000000 (0 MiB) Jan 01 00:00:04 rpi2 kernel: vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB) Jan 01 00:00:04 rpi2 kernel: brd: module loaded Jan 01 00:00:04 rpi2 kernel: loop: module loaded Jan 01 00:00:04 rpi2 kernel: vchiq: vchiq_init_state: slot_zero = 0xbac80000, is_master = 0 Jan 01 00:00:04 rpi2 kernel: Loading iSCSI transport class v2.0-870. Jan 01 00:00:04 rpi2 kernel: usbcore: registered new interface driver smsc95xx Jan 01 00:00:04 rpi2 kernel: dwc_otg: version 3.00a 10-AUG-2012 (platform bus) Jan 01 00:00:04 rpi2 kernel: Core Release: 2.80a Jan 01 00:00:04 rpi2 kernel: Setting default values for core params Jan 01 00:00:04 rpi2 kernel: Finished setting default values for core params Jan 01 00:00:04 rpi2 kernel: Using Buffer DMA mode Jan 01 00:00:04 rpi2 kernel: Periodic Transfer Interrupt Enhancement - disabled Jan 01 00:00:04 rpi2 kernel: Multiprocessor Interrupt Enhancement - disabled Jan 01 00:00:04 rpi2 kernel: OTG VER PARAM: 0, OTG VER FLAG: 0 Jan 01 00:00:04 rpi2 kernel: Dedicated Tx FIFOs mode Jan 01 00:00:04 rpi2 kernel: WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xbac14000 dma = 0xfac14000 len=9024 Jan 01 00:00:04 rpi2 kernel: FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Jan 01 00:00:04 rpi2 kernel: dwc_otg: Microframe scheduler enabled Jan 01 00:00:04 rpi2 kernel: WARN::hcd_init_fiq:412: FIQ on core 1 at 0x80400a40 Jan 01 00:00:04 rpi2 kernel: WARN::hcd_init_fiq:413: FIQ ASM at 0x80400d9c length 36 Jan 01 00:00:04 rpi2 kernel: WARN::hcd_init_fiq:438: MPHI regs_base at 0xbb89a000 Jan 01 00:00:04 rpi2 kernel: dwc_otg bcm2708_usb: DWC OTG Controller Jan 01 00:00:04 rpi2 kernel: dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1 Jan 01 00:00:04 rpi2 kernel: dwc_otg bcm2708_usb: irq 32, io mem 0x00000000 Jan 01 00:00:04 rpi2 kernel: Init: Port Power? op_state=1 Jan 01 00:00:04 rpi2 kernel: Init: Power Port (0) Jan 01 00:00:04 rpi2 kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Jan 01 00:00:04 rpi2 kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jan 01 00:00:04 rpi2 kernel: usb usb1: Product: DWC OTG Controller Jan 01 00:00:04 rpi2 kernel: usb usb1: Manufacturer: Linux 4.1.11-v7+ dwc_otg_hcd Jan 01 00:00:04 rpi2 kernel: usb usb1: SerialNumber: bcm2708_usb Jan 01 00:00:04 rpi2 kernel: hub 1-0:1.0: USB hub found Jan 01 00:00:04 rpi2 kernel: hub 1-0:1.0: 1 port detected Jan 01 00:00:04 rpi2 kernel: dwc_otg: FIQ enabled Jan 01 00:00:04 rpi2 kernel: dwc_otg: NAK holdoff enabled Jan 01 00:00:04 rpi2 kernel: dwc_otg: FIQ split-transaction FSM enabled Jan 01 00:00:04 rpi2 kernel: Module dwc_common_port init Jan 01 00:00:04 rpi2 kernel: usbcore: registered new interface driver usb-storage Jan 01 00:00:04 rpi2 kernel: mousedev: PS/2 mouse device common for all mice Jan 01 00:00:04 rpi2 kernel: bcm2835-cpufreq: min=600000 max=700000 Jan 01 00:00:04 rpi2 kernel: sdhci: Secure Digital Host Controller Interface driver Jan 01 00:00:04 rpi2 kernel: sdhci: Copyright(c) Pierre Ossman Jan 01 00:00:04 rpi2 kernel: mmc-bcm2835 mmc-bcm2835.0: mmc_debug:0 mmc_debug2:0 Jan 01 00:00:04 rpi2 kernel: mmc-bcm2835 mmc-bcm2835.0: DMA channels allocated Jan 01 00:00:04 rpi2 kernel: sdhci-pltfm: SDHCI platform and OF driver helper Jan 01 00:00:04 rpi2 kernel: ledtrig-cpu: registered to indicate activity on CPUs Jan 01 00:00:04 rpi2 kernel: hidraw: raw HID events driver (C) Jiri Kosina Jan 01 00:00:04 rpi2 kernel: usbcore: registered new interface driver usbhid Jan 01 00:00:04 rpi2 kernel: usbhid: USB HID core driver Jan 01 00:00:04 rpi2 kernel: Initializing XFRM netlink socket Jan 01 00:00:04 rpi2 kernel: NET: Registered protocol family 17 Jan 01 00:00:04 rpi2 kernel: Indeed it is in host mode hprt0 = 00021501 Jan 01 00:00:04 rpi2 kernel: Key type dns_resolver registered Jan 01 00:00:04 rpi2 kernel: Registering SWP/SWPB emulation handler Jan 01 00:00:04 rpi2 kernel: registered taskstats version 1 Jan 01 00:00:04 rpi2 kernel: vc-sm: Videocore shared memory driver Jan 01 00:00:04 rpi2 kernel: [vc_sm_connected_init]: start Jan 01 00:00:04 rpi2 kernel: [vc_sm_connected_init]: end - returning 0 Jan 01 00:00:04 rpi2 kernel: Waiting for root device /dev/mmcblk0p3... Jan 01 00:00:04 rpi2 kernel: mmc0: host does not support reading read-only switch, assuming write-enable Jan 01 00:00:04 rpi2 kernel: mmc0: new high speed SDHC card at address 0001 Jan 01 00:00:04 rpi2 kernel: mmcblk0: mmc0:0001 00000 29.8 GiB Jan 01 00:00:04 rpi2 kernel: mmcblk0: p1 p2 p3 Jan 01 00:00:04 rpi2 kernel: usb 1-1: new high-speed USB device number 2 using dwc_otg Jan 01 00:00:04 rpi2 kernel: Indeed it is in host mode hprt0 = 00001101 Jan 01 00:00:04 rpi2 kernel: EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) Jan 01 00:00:04 rpi2 kernel: VFS: Mounted root (ext4 filesystem) on device 179:3. Jan 01 00:00:04 rpi2 kernel: devtmpfs: mounted Jan 01 00:00:04 rpi2 kernel: Freeing unused kernel memory: 416K (80774000 - 807dc000) Jan 01 00:00:04 rpi2 kernel: usb 1-1: New USB device found, idVendor=0424, idProduct=9514 Jan 01 00:00:04 rpi2 kernel: usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jan 01 00:00:04 rpi2 kernel: hub 1-1:1.0: USB hub found Jan 01 00:00:04 rpi2 kernel: hub 1-1:1.0: 5 ports detected Jan 01 00:00:04 rpi2 kernel: usb 1-1.1: new high-speed USB device number 3 using dwc_otg Jan 01 00:00:04 rpi2 kernel: NET: Registered protocol family 10 Jan 01 00:00:04 rpi2 systemd[1]: Inserted module 'ipv6' Jan 01 00:00:04 rpi2 kernel: usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 Jan 01 00:00:04 rpi2 kernel: usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jan 01 00:00:04 rpi2 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team Jan 01 00:00:04 rpi2 systemd[1]: Inserted module 'ip_tables' Jan 01 00:00:04 rpi2 kernel: smsc95xx v1.0.4 Jan 01 00:00:04 rpi2 kernel: random: systemd urandom read with 64 bits of entropy available Jan 01 00:00:04 rpi2 systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN) Jan 01 00:00:04 rpi2 systemd[1]: Detected architecture arm. Jan 01 00:00:04 rpi2 systemd[1]: Set hostname to <rpi2>. Jan 01 00:00:04 rpi2 kernel: smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:e1:49:65 Jan 01 00:00:04 rpi2 kernel: uart-pl011 dev:f1: no DMA platform data Jan 01 00:00:04 rpi2 kernel: usb 1-1.3: new low-speed USB device number 4 using dwc_otg Jan 01 00:00:04 rpi2 kernel: usb 1-1.3: New USB device found, idVendor=045e, idProduct=0040 Jan 01 00:00:04 rpi2 kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Jan 01 00:00:04 rpi2 kernel: usb 1-1.3: Product: Microsoft 3-Button Mouse with IntelliEye(TM) Jan 01 00:00:04 rpi2 kernel: usb 1-1.3: Manufacturer: Microsoft Jan 01 00:00:04 rpi2 kernel: input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:045E:0040.0001/input/input0 Jan 01 00:00:04 rpi2 kernel: hid-generic 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-bcm2708_usb-1.3/input0 Jan 01 00:00:04 rpi2 systemd[1]: Configuration file /usr/lib/systemd/system/auditd.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway. Jan 01 00:00:04 rpi2 kernel: usb 1-1.5: new low-speed USB device number 5 using dwc_otg Jan 01 00:00:04 rpi2 systemd[1]: Configuration file /usr/lib/systemd/system/ebtables.service is marked executable. Please remove executable permission bits. Proceeding anyway. Jan 01 00:00:04 rpi2 systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. Jan 01 00:00:04 rpi2 systemd[1]: Reached target Encrypted Volumes. Jan 01 00:00:04 rpi2 systemd[1]: Starting Encrypted Volumes. Jan 01 00:00:04 rpi2 systemd[1]: Started Forward Password Requests to Wall Directory Watch. Jan 01 00:00:04 rpi2 systemd[1]: Starting Forward Password Requests to Wall Directory Watch. Jan 01 00:00:04 rpi2 kernel: usb 1-1.5: New USB device found, idVendor=413c, idProduct=2105 Jan 01 00:00:04 rpi2 kernel: usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jan 01 00:00:04 rpi2 kernel: usb 1-1.5: Product: Dell USB Keyboard Jan 01 00:00:04 rpi2 kernel: usb 1-1.5: Manufacturer: Dell Jan 01 00:00:04 rpi2 kernel: input: Dell Dell USB Keyboard as /devices/platform/bcm2708_usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:413C:2105.0002/input/input1 Jan 01 00:00:04 rpi2 systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. Jan 01 00:00:04 rpi2 systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. Jan 01 00:00:04 rpi2 kernel: hid-generic 0003:413C:2105.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-bcm2708_usb-1.5/input0 Jan 01 00:00:04 rpi2 systemd[1]: Reached target Remote File Systems. Jan 01 00:00:04 rpi2 systemd[1]: Starting Remote File Systems. Jan 01 00:00:04 rpi2 systemd[1]: Created slice Root Slice. Jan 01 00:00:04 rpi2 systemd[1]: Starting Root Slice. Jan 01 00:00:04 rpi2 systemd[1]: Listening on udev Control Socket. Jan 01 00:00:04 rpi2 systemd[1]: Starting udev Control Socket. Jan 01 00:00:04 rpi2 systemd[1]: Listening on Delayed Shutdown Socket. Jan 01 00:00:04 rpi2 systemd[1]: Starting Delayed Shutdown Socket. Jan 01 00:00:04 rpi2 systemd[1]: Created slice System Slice. Jan 01 00:00:04 rpi2 systemd[1]: Starting System Slice. Jan 01 00:00:04 rpi2 systemd[1]: Starting Collect Read-Ahead Data... Jan 01 00:00:04 rpi2 systemd[1]: Started Replay Read-Ahead Data. Jan 01 00:00:04 rpi2 systemd[1]: Created slice system-getty.slice. Jan 01 00:00:04 rpi2 systemd[1]: Starting system-getty.slice. Jan 01 00:00:04 rpi2 systemd[1]: Created slice system-serial\x2dgetty.slice. Jan 01 00:00:04 rpi2 systemd[1]: Starting system-serial\x2dgetty.slice. Jan 01 00:00:04 rpi2 systemd[1]: Created slice User and Session Slice. Jan 01 00:00:04 rpi2 systemd[1]: Starting User and Session Slice. Jan 01 00:00:04 rpi2 systemd[1]: Reached target Slices. Jan 01 00:00:04 rpi2 systemd[1]: Starting Slices. Jan 01 00:00:04 rpi2 systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. Jan 01 00:00:04 rpi2 systemd[1]: Starting /dev/initctl Compatibility Named Pipe. Jan 01 00:00:04 rpi2 systemd[1]: Listening on udev Kernel Socket. Jan 01 00:00:04 rpi2 systemd[1]: Starting udev Kernel Socket. Jan 01 00:00:04 rpi2 systemd[1]: Listening on Journal Socket. Jan 01 00:00:04 rpi2 systemd[1]: Starting Journal Socket. Jan 01 00:00:04 rpi2 systemd[1]: Mounting Debug File System... Jan 01 00:00:04 rpi2 systemd[1]: Starting Create list of required static device nodes for the current kernel... Jan 01 00:00:04 rpi2 systemd[1]: Mounted Huge Pages File System. Jan 01 00:00:04 rpi2 systemd[1]: Mounting POSIX Message Queue File System... Jan 01 00:00:04 rpi2 systemd[1]: Starting Journal Service... Jan 01 00:00:04 rpi2 systemd[1]: Mounted POSIX Message Queue File System. Jan 01 00:00:04 rpi2 systemd[1]: Mounted Debug File System. Jan 01 00:00:04 rpi2 systemd[1]: Started Collect Read-Ahead Data. Jan 01 00:00:04 rpi2 systemd[1]: Started Create list of required static device nodes for the current kernel. Jan 01 00:00:04 rpi2 systemd-journal[81]: Journal started -- Subject: The journal has been started -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- The system journal process has started up, opened the journal -- files for writing and is now ready to process requests. Jan 01 00:00:04 rpi2 systemd[1]: Started Journal Service. Jan 01 00:00:04 rpi2 systemd[1]: Starting Setup Virtual Console... -- Subject: Unit systemd-vconsole-setup.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-vconsole-setup.service has begun starting up. Jan 01 00:00:04 rpi2 systemd[1]: Starting Remount Root and Kernel File Systems... -- Subject: Unit systemd-remount-fs.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-remount-fs.service has begun starting up. Jan 01 00:00:04 rpi2 systemd[1]: Started Load legacy module configuration. -- Subject: Unit rhel-loadmodules.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit rhel-loadmodules.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:04 rpi2 systemd[1]: Started Set Up Additional Binary Formats. -- Subject: Unit systemd-binfmt.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-binfmt.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:04 rpi2 systemd[1]: Starting Create Static Device Nodes in /dev... -- Subject: Unit systemd-tmpfiles-setup-dev.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-tmpfiles-setup-dev.service has begun starting up. Jan 01 00:00:04 rpi2 systemd[1]: Started Load Kernel Modules. -- Subject: Unit systemd-modules-load.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-modules-load.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:04 rpi2 systemd[1]: Starting Apply Kernel Variables... -- Subject: Unit systemd-sysctl.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-sysctl.service has begun starting up. Jan 01 00:00:04 rpi2 systemd[1]: Mounting Configuration File System... -- Subject: Unit sys-kernel-config.mount has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit sys-kernel-config.mount has begun starting up. Jan 01 00:00:04 rpi2 systemd[1]: Mounted FUSE Control File System. -- Subject: Unit sys-fs-fuse-connections.mount has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit sys-fs-fuse-connections.mount has finished starting up. -- -- The start-up result is done. Jan 01 00:00:04 rpi2 systemd[1]: Started Setup Virtual Console. -- Subject: Unit systemd-vconsole-setup.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-vconsole-setup.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:04 rpi2 systemd[1]: Started Apply Kernel Variables. -- Subject: Unit systemd-sysctl.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-sysctl.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:04 rpi2 systemd[1]: Mounted Configuration File System. -- Subject: Unit sys-kernel-config.mount has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit sys-kernel-config.mount has finished starting up. -- -- The start-up result is done. Jan 01 00:00:04 rpi2 systemd[1]: Started Create Static Device Nodes in /dev. -- Subject: Unit systemd-tmpfiles-setup-dev.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-tmpfiles-setup-dev.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:04 rpi2 systemd[1]: Starting udev Kernel Device Manager... -- Subject: Unit systemd-udevd.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-udevd.service has begun starting up. Jan 01 00:00:04 rpi2 systemd-udevd[96]: starting version 219 Jan 01 00:00:04 rpi2 kernel: EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) Jan 01 00:00:04 rpi2 systemd[1]: Started Remount Root and Kernel File Systems. -- Subject: Unit systemd-remount-fs.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-remount-fs.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:04 rpi2 systemd[1]: Reached target Local File Systems (Pre). -- Subject: Unit local-fs-pre.target has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit local-fs-pre.target has finished starting up. -- -- The start-up result is done. Jan 01 00:00:04 rpi2 systemd[1]: Starting Local File Systems (Pre). -- Subject: Unit local-fs-pre.target has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit local-fs-pre.target has begun starting up. Jan 01 00:00:04 rpi2 systemd[1]: Starting Rebuild Dynamic Linker Cache... -- Subject: Unit ldconfig.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit ldconfig.service has begun starting up. Jan 01 00:00:04 rpi2 systemd[1]: Starting Load/Save Random Seed... -- Subject: Unit systemd-random-seed.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-random-seed.service has begun starting up. Jan 01 00:00:04 rpi2 systemd[1]: Starting Flush Journal to Persistent Storage... -- Subject: Unit systemd-journal-flush.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-journal-flush.service has begun starting up. Jan 01 00:00:04 rpi2 systemd[1]: Starting Configure read-only root support... -- Subject: Unit rhel-readonly.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit rhel-readonly.service has begun starting up. Jan 01 00:00:04 rpi2 systemd[1]: Started First Boot Wizard. -- Subject: Unit systemd-firstboot.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-firstboot.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:04 rpi2 systemd[1]: Starting Rebuild Hardware Database... -- Subject: Unit systemd-hwdb-update.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-hwdb-update.service has begun starting up. Jan 01 00:00:04 rpi2 systemd[1]: Started udev Kernel Device Manager. -- Subject: Unit systemd-udevd.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-udevd.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:04 rpi2 systemd[1]: Started Load/Save Random Seed. -- Subject: Unit systemd-random-seed.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-random-seed.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:04 rpi2 systemd-journal[81]: Runtime journal is using 5.7M (max allowed 46.3M, trying to leave 69.4M free of 457.1M available ? current limit 46.3M). Jan 01 00:00:04 rpi2 systemd[1]: Started Flush Journal to Persistent Storage. -- Subject: Unit systemd-journal-flush.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-journal-flush.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:04 rpi2 systemd[1]: Started Configure read-only root support. -- Subject: Unit rhel-readonly.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit rhel-readonly.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:05 rpi2 kernel: random: nonblocking pool is initialized Jan 01 00:00:05 rpi2 systemd[1]: Started Rebuild Dynamic Linker Cache. -- Subject: Unit ldconfig.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit ldconfig.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:07 rpi2 systemd[1]: Started Rebuild Hardware Database. -- Subject: Unit systemd-hwdb-update.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-hwdb-update.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:07 rpi2 systemd[1]: Starting udev Coldplug all Devices... -- Subject: Unit systemd-udev-trigger.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-udev-trigger.service has begun starting up. Jan 01 00:00:07 rpi2 systemd[1]: Started udev Coldplug all Devices. -- Subject: Unit systemd-udev-trigger.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-udev-trigger.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:07 rpi2 systemd[1]: Found device /dev/ttyAMA0. -- Subject: Unit dev-ttyAMA0.device has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit dev-ttyAMA0.device has finished starting up. -- -- The start-up result is done. Jan 01 00:00:07 rpi2 systemd[1]: Starting Show Plymouth Boot Screen... -- Subject: Unit plymouth-start.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit plymouth-start.service has begun starting up. Jan 01 00:00:07 rpi2 kernel: bcm2708_spi bcm2708_spi.0: master is unqueued, this is deprecated Jan 01 00:00:07 rpi2 kernel: bcm2708_spi bcm2708_spi.0: SPI Controller at 0x3f204000 (irq 80) Jan 01 00:00:07 rpi2 kernel: bcm2708_i2c_init_pinmode(1,2) Jan 01 00:00:07 rpi2 kernel: bcm2708_i2c_init_pinmode(1,3) Jan 01 00:00:07 rpi2 kernel: bcm2708_i2c bcm2708_i2c.1: BSC1 Controller at 0x3f804000 (irq 79) (baudrate 100000) Jan 01 00:00:07 rpi2 systemd[1]: Received SIGRTMIN+20 from PID 138 (plymouthd). Jan 01 00:00:07 rpi2 systemd[1]: Started Show Plymouth Boot Screen. -- Subject: Unit plymouth-start.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit plymouth-start.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:07 rpi2 systemd[1]: Started Forward Password Requests to Plymouth Directory Watch. -- Subject: Unit systemd-ask-password-plymouth.path has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-ask-password-plymouth.path has finished starting up. -- -- The start-up result is done. Jan 01 00:00:07 rpi2 systemd[1]: Starting Forward Password Requests to Plymouth Directory Watch. -- Subject: Unit systemd-ask-password-plymouth.path has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-ask-password-plymouth.path has begun starting up. Jan 01 00:00:07 rpi2 systemd[1]: Started Dispatch Password Requests to Console Directory Watch. -- Subject: Unit systemd-ask-password-console.path has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-ask-password-console.path has finished starting up. -- -- The start-up result is done. Jan 01 00:00:07 rpi2 systemd[1]: Found device /dev/disk/by-label/1BBF2D52. -- Subject: Unit dev-disk-by\x2dlabel-1BBF2D52.device has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit dev-disk-by\x2dlabel-1BBF2D52.device has finished starting up. -- -- The start-up result is done. Jan 01 00:00:08 rpi2 systemd[1]: Found device /dev/disk/by-uuid/f28d9939-d00d-4e9e-aceb-1ac7b3e607ce. -- Subject: Unit dev-disk-by\x2duuid-f28d9939\x2dd00d\x2d4e9e\x2daceb\x2d1ac7b3e607ce.device has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit dev-disk-by\x2duuid-f28d9939\x2dd00d\x2d4e9e\x2daceb\x2d1ac7b3e607ce.device has finished starting up. -- -- The start-up result is done. Jan 01 00:00:08 rpi2 systemd[1]: Activating swap /dev/disk/by-uuid/f28d9939-d00d-4e9e-aceb-1ac7b3e607ce... -- Subject: Unit dev-disk-by\x2duuid-f28d9939\x2dd00d\x2d4e9e\x2daceb\x2d1ac7b3e607ce.swap has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit dev-disk-by\x2duuid-f28d9939\x2dd00d\x2d4e9e\x2daceb\x2d1ac7b3e607ce.swap has begun starting up. Jan 01 00:00:08 rpi2 systemd[1]: Mounting /boot... -- Subject: Unit boot.mount has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit boot.mount has begun starting up. Jan 01 00:00:08 rpi2 kernel: Adding 524284k swap on /dev/mmcblk0p2. Priority:-1 extents:1 across:524284k SSFS Jan 01 00:00:08 rpi2 systemd[1]: Activated swap /dev/disk/by-uuid/f28d9939-d00d-4e9e-aceb-1ac7b3e607ce. -- Subject: Unit dev-disk-by\x2duuid-f28d9939\x2dd00d\x2d4e9e\x2daceb\x2d1ac7b3e607ce.swap has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit dev-disk-by\x2duuid-f28d9939\x2dd00d\x2d4e9e\x2daceb\x2d1ac7b3e607ce.swap has finished starting up. -- -- The start-up result is done. Jan 01 00:00:08 rpi2 systemd[1]: Mounted /boot. -- Subject: Unit boot.mount has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit boot.mount has finished starting up. -- -- The start-up result is done. Jan 01 00:00:08 rpi2 kernel: wm8804 1-003b: Failed to read device ID: -5 Jan 01 00:00:08 rpi2 kernel: wm8804: probe of 1-003b failed with error -5 Jan 01 00:00:08 rpi2 systemd[1]: Reached target Local File Systems. -- Subject: Unit local-fs.target has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit local-fs.target has finished starting up. -- -- The start-up result is done. Jan 01 00:00:08 rpi2 systemd[1]: Starting Local File Systems. -- Subject: Unit local-fs.target has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit local-fs.target has begun starting up. Jan 01 00:00:08 rpi2 systemd[1]: Started Reconfigure the system on administrator request. -- Subject: Unit rhel-configure.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit rhel-configure.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:08 rpi2 systemd[1]: Starting Tell Plymouth To Write Out Runtime Data... -- Subject: Unit plymouth-read-write.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit plymouth-read-write.service has begun starting up. Jan 01 00:00:08 rpi2 systemd[1]: Started Import network configuration from initramfs. -- Subject: Unit rhel-import-state.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit rhel-import-state.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:08 rpi2 systemd[1]: Started Commit a transient machine-id on disk. -- Subject: Unit systemd-machine-id-commit.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-machine-id-commit.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:08 rpi2 systemd[1]: Starting Create Volatile Files and Directories... -- Subject: Unit systemd-tmpfiles-setup.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-tmpfiles-setup.service has begun starting up. Jan 01 00:00:08 rpi2 kernel: pcm512x 1-004d: Failed to reset device: -5 Jan 01 00:00:08 rpi2 kernel: pcm512x: probe of 1-004d failed with error -5 Jan 01 00:00:08 rpi2 kernel: pcm512x 1-004c: Failed to reset device: -5 Jan 01 00:00:08 rpi2 kernel: pcm512x: probe of 1-004c failed with error -5 Jan 01 00:00:08 rpi2 systemd[1]: Starting Mark the need to relabel after reboot... -- Subject: Unit rhel-autorelabel-mark.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit rhel-autorelabel-mark.service has begun starting up. Jan 01 00:00:08 rpi2 systemd[1]: Started Relabel all filesystems, if necessary. -- Subject: Unit rhel-autorelabel.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit rhel-autorelabel.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:08 rpi2 systemd[1]: Starting Rebuild Journal Catalog... -- Subject: Unit systemd-journal-catalog-update.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-journal-catalog-update.service has begun starting up. Jan 01 00:00:08 rpi2 systemd[1]: Reached target Swap. -- Subject: Unit swap.target has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit swap.target has finished starting up. -- -- The start-up result is done. Jan 01 00:00:08 rpi2 systemd[1]: Starting Swap. -- Subject: Unit swap.target has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit swap.target has begun starting up. Jan 01 00:00:08 rpi2 systemd[1]: Started Create Volatile Files and Directories. -- Subject: Unit systemd-tmpfiles-setup.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-tmpfiles-setup.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:08 rpi2 systemd[1]: Started Mark the need to relabel after reboot. -- Subject: Unit rhel-autorelabel-mark.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit rhel-autorelabel-mark.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:08 rpi2 systemd[1]: Started Tell Plymouth To Write Out Runtime Data. -- Subject: Unit plymouth-read-write.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit plymouth-read-write.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:08 rpi2 systemd[1]: Started Rebuild Journal Catalog. -- Subject: Unit systemd-journal-catalog-update.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-journal-catalog-update.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:08 rpi2 systemd[1]: Starting Update is Completed... -- Subject: Unit systemd-update-done.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-update-done.service has begun starting up. Jan 01 00:00:08 rpi2 systemd[1]: Starting Security Auditing Service... -- Subject: Unit auditd.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit auditd.service has begun starting up. Jan 01 00:00:08 rpi2 systemd[1]: Started Update is Completed. -- Subject: Unit systemd-update-done.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-update-done.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:08 rpi2 auditd[164]: Error - audit support not in kernel Jan 01 00:00:08 rpi2 auditd[164]: Cannot open netlink audit socket Jan 01 00:00:08 rpi2 auditd[164]: The audit daemon is exiting. Jan 01 00:00:08 rpi2 systemd[1]: auditd.service: main process exited, code=exited, status=1/FAILURE Jan 01 00:00:08 rpi2 augenrules[165]: Error - audit support not in kernel Jan 01 00:00:08 rpi2 augenrules[165]: Error - audit support not in kernel Jan 01 00:00:08 rpi2 augenrules[165]: Cannot open netlink audit socket Jan 01 00:00:08 rpi2 systemd[1]: Failed to start Security Auditing Service. -- Subject: Unit auditd.service has failed -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit auditd.service has failed. -- -- The result is failed. Jan 01 00:00:08 rpi2 systemd[1]: Unit auditd.service entered failed state. Jan 01 00:00:08 rpi2 systemd[1]: auditd.service failed. Jan 01 00:00:08 rpi2 systemd[1]: Starting Update UTMP about System Boot/Shutdown... -- Subject: Unit systemd-update-utmp.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-update-utmp.service has begun starting up. Jan 01 00:00:08 rpi2 systemd[1]: Started Update UTMP about System Boot/Shutdown. -- Subject: Unit systemd-update-utmp.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-update-utmp.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:08 rpi2 systemd[1]: Reached target System Initialization. -- Subject: Unit sysinit.target has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit sysinit.target has finished starting up. -- -- The start-up result is done. Jan 01 00:00:08 rpi2 systemd[1]: Starting System Initialization. -- Subject: Unit sysinit.target has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit sysinit.target has begun starting up. Jan 01 00:00:08 rpi2 systemd[1]: Started Flexible branding. -- Subject: Unit brandbot.path has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit brandbot.path has finished starting up. -- -- The start-up result is done. Jan 01 00:00:08 rpi2 systemd[1]: Starting Flexible branding. -- Subject: Unit brandbot.path has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit brandbot.path has begun starting up. Jan 01 00:00:08 rpi2 systemd[1]: Reached target Paths. -- Subject: Unit paths.target has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit paths.target has finished starting up. -- -- The start-up result is done. Jan 01 00:00:08 rpi2 systemd[1]: Starting Paths. -- Subject: Unit paths.target has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit paths.target has begun starting up. Jan 01 00:00:08 rpi2 systemd[1]: Started Daily Cleanup of Temporary Directories. -- Subject: Unit systemd-tmpfiles-clean.timer has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-tmpfiles-clean.timer has finished starting up. -- -- The start-up result is done. Jan 01 00:00:08 rpi2 systemd[1]: Starting Daily Cleanup of Temporary Directories. -- Subject: Unit systemd-tmpfiles-clean.timer has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-tmpfiles-clean.timer has begun starting up. Jan 01 00:00:08 rpi2 systemd[1]: Reached target Timers. -- Subject: Unit timers.target has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit timers.target has finished starting up. -- -- The start-up result is done. Jan 01 00:00:08 rpi2 systemd[1]: Starting Timers. -- Subject: Unit timers.target has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit timers.target has begun starting up. Jan 01 00:00:08 rpi2 systemd[1]: Listening on D-Bus System Message Bus Socket. -- Subject: Unit dbus.socket has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit dbus.socket has finished starting up. -- -- The start-up result is done. Jan 01 00:00:08 rpi2 systemd[1]: Starting D-Bus System Message Bus Socket. -- Subject: Unit dbus.socket has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit dbus.socket has begun starting up. Jan 01 00:00:08 rpi2 systemd[1]: Reached target Sockets. -- Subject: Unit sockets.target has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit sockets.target has finished starting up. -- -- The start-up result is done. Jan 01 00:00:08 rpi2 systemd[1]: Starting Sockets. -- Subject: Unit sockets.target has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit sockets.target has begun starting up. Jan 01 00:00:08 rpi2 systemd[1]: Reached target Basic System. -- Subject: Unit basic.target has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit basic.target has finished starting up. -- -- The start-up result is done. Jan 01 00:00:08 rpi2 systemd[1]: Starting Basic System. -- Subject: Unit basic.target has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit basic.target has begun starting up. Jan 01 00:00:08 rpi2 systemd[1]: Started irqbalance daemon. -- Subject: Unit irqbalance.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit irqbalance.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:08 rpi2 systemd[1]: Starting irqbalance daemon... -- Subject: Unit irqbalance.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit irqbalance.service has begun starting up. Jan 01 00:00:08 rpi2 systemd[1]: Starting firewalld - dynamic firewall daemon... -- Subject: Unit firewalld.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit firewalld.service has begun starting up. Jan 01 00:00:08 rpi2 systemd[1]: Started D-Bus System Message Bus. -- Subject: Unit dbus.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit dbus.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:09 rpi2 systemd[1]: Starting D-Bus System Message Bus... -- Subject: Unit dbus.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit dbus.service has begun starting up. Jan 01 00:00:09 rpi2 systemd[1]: Starting Permit User Sessions... -- Subject: Unit systemd-user-sessions.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-user-sessions.service has begun starting up. Jan 01 00:00:09 rpi2 systemd[1]: Starting System Logging Service... -- Subject: Unit rsyslog.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit rsyslog.service has begun starting up. Jan 01 00:00:09 rpi2 systemd[1]: Starting OpenSSH Server Key Generation... -- Subject: Unit sshd-keygen.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit sshd-keygen.service has begun starting up. Jan 01 00:00:09 rpi2 systemd[1]: Starting Root Filesystem Auto-Resizer... -- Subject: Unit rootfs-resize.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit rootfs-resize.service has begun starting up. Jan 01 00:00:09 rpi2 systemd[1]: Starting Login Service... -- Subject: Unit systemd-logind.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-logind.service has begun starting up. Jan 01 00:00:09 rpi2 systemd[1]: Starting Dump dmesg to /var/log/dmesg... -- Subject: Unit rhel-dmesg.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit rhel-dmesg.service has begun starting up. Jan 01 00:00:09 rpi2 systemd[1]: Started Permit User Sessions. -- Subject: Unit systemd-user-sessions.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-user-sessions.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:09 rpi2 systemd[1]: Starting Terminate Plymouth Boot Screen... -- Subject: Unit plymouth-quit.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit plymouth-quit.service has begun starting up. Jan 01 00:00:09 rpi2 systemd[1]: Starting Wait for Plymouth Boot Screen to Quit... -- Subject: Unit plymouth-quit-wait.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit plymouth-quit-wait.service has begun starting up. Jan 01 00:00:09 rpi2 systemd[1]: Started Command Scheduler. -- Subject: Unit crond.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit crond.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:09 rpi2 systemd[1]: Starting Command Scheduler... -- Subject: Unit crond.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit crond.service has begun starting up. Jan 01 00:00:09 rpi2 systemd[1]: Received SIGRTMIN+21 from PID 138 (plymouthd). Jan 01 00:00:09 rpi2 systemd[1]: Started Dump dmesg to /var/log/dmesg. -- Subject: Unit rhel-dmesg.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit rhel-dmesg.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:09 rpi2 crond[208]: (CRON) INFO (RANDOM_DELAY will be scaled with factor 67% if used.) Jan 01 00:00:09 rpi2 systemd[1]: Started Terminate Plymouth Boot Screen. -- Subject: Unit plymouth-quit.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit plymouth-quit.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:09 rpi2 systemd[1]: Started Wait for Plymouth Boot Screen to Quit. -- Subject: Unit plymouth-quit-wait.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit plymouth-quit-wait.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:09 rpi2 crond[208]: (CRON) INFO (running with inotify support) Jan 01 00:00:09 rpi2 systemd[1]: Started Serial Getty on ttyAMA0. -- Subject: Unit serial-getty(a)ttyAMA0.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit serial-getty(a)ttyAMA0.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:09 rpi2 systemd[1]: Starting Serial Getty on ttyAMA0... -- Subject: Unit serial-getty(a)ttyAMA0.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit serial-getty(a)ttyAMA0.service has begun starting up. Jan 01 00:00:09 rpi2 systemd[1]: Started Getty on tty1. -- Subject: Unit getty(a)tty1.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit getty(a)tty1.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:09 rpi2 systemd[1]: Starting Getty on tty1... -- Subject: Unit getty(a)tty1.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit getty(a)tty1.service has begun starting up. Jan 01 00:00:09 rpi2 systemd[1]: Reached target Login Prompts. -- Subject: Unit getty.target has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit getty.target has finished starting up. -- -- The start-up result is done. Jan 01 00:00:09 rpi2 systemd[1]: Starting Login Prompts. -- Subject: Unit getty.target has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit getty.target has begun starting up. Jan 01 00:00:09 rpi2 systemd[1]: Started Login Service. -- Subject: Unit systemd-logind.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-logind.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:09 rpi2 systemd-logind[201]: New seat seat0. -- Subject: A new seat seat0 is now available -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- Documentation: http://www.freedesktop.org/wiki/Software/systemd/multiseat -- -- A new seat seat0 has been configured and is now available. Jan 01 00:00:09 rpi2 systemd[1]: Started System Logging Service. -- Subject: Unit rsyslog.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit rsyslog.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:10 rpi2 systemd[1]: Started Root Filesystem Auto-Resizer. -- Subject: Unit rootfs-resize.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit rootfs-resize.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:11 rpi2 kernel: nf_conntrack version 0.5.0 (14815 buckets, 59260 max) Jan 01 00:00:11 rpi2 kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team Jan 01 00:00:11 rpi2 kernel: Ebtables v2.0 registered Jan 01 00:00:11 rpi2 kernel: bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. Jan 01 00:00:12 rpi2 systemd[1]: Started firewalld - dynamic firewall daemon. -- Subject: Unit firewalld.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit firewalld.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:12 rpi2 systemd[1]: Starting Network Manager... -- Subject: Unit NetworkManager.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit NetworkManager.service has begun starting up. Jan 01 00:00:12 rpi2 NetworkManager[269]: <info> NetworkManager (version 1.0.6-27.el7) is starting... Jan 01 00:00:12 rpi2 NetworkManager[269]: <info> Read config: /etc/NetworkManager/NetworkManager.conf and conf.d: 10-ibft-plugin.conf Jan 01 00:00:12 rpi2 systemd[1]: Started Network Manager. -- Subject: Unit NetworkManager.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit NetworkManager.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:12 rpi2 systemd[1]: Starting Network Manager Wait Online... -- Subject: Unit NetworkManager-wait-online.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit NetworkManager-wait-online.service has begun starting up. Jan 01 00:00:13 rpi2 NetworkManager[269]: <info> Loaded settings plugin ifcfg-rh: (c) 2007 - 2015 Red Hat, Inc. To report bugs please use the NetworkManager mailing list. (/usr/lib/NetworkManager/libnm-settings-plugin-ifcfg-rh.so) Jan 01 00:00:13 rpi2 NetworkManager[269]: <info> Loaded settings plugin iBFT: (c) 2014 Red Hat, Inc. To report bugs please use the NetworkManager mailing list. (/usr/lib/NetworkManager/libnm-settings-plugin-ibft.so) Jan 01 00:00:13 rpi2 NetworkManager[269]: <info> Loaded settings plugin keyfile: (c) 2007 - 2015 Red Hat, Inc. To report bugs please use the NetworkManager mailing list. Jan 01 00:00:13 rpi2 NetworkManager[269]: <info> ifcfg-rh: new connection /etc/sysconfig/network-scripts/ifcfg-eth0 (0cb1274f-af94-4a51-a5bc-7608a1e37d63,"eth0") Jan 01 00:00:13 rpi2 NetworkManager[269]: <info> monitoring kernel firmware directory '/lib/firmware'. Jan 01 00:00:13 rpi2 NetworkManager[269]: <info> Loaded device plugin: NMVxlanFactory (internal) Jan 01 00:00:13 rpi2 NetworkManager[269]: <info> Loaded device plugin: NMVlanFactory (internal) Jan 01 00:00:13 rpi2 NetworkManager[269]: <info> Loaded device plugin: NMVethFactory (internal) Jan 01 00:00:13 rpi2 NetworkManager[269]: <info> Loaded device plugin: NMTunFactory (internal) Jan 01 00:00:13 rpi2 NetworkManager[269]: <info> Loaded device plugin: NMMacvlanFactory (internal) Jan 01 00:00:13 rpi2 NetworkManager[269]: <info> Loaded device plugin: NMInfinibandFactory (internal) Jan 01 00:00:13 rpi2 NetworkManager[269]: <info> Loaded device plugin: NMGreFactory (internal) Jan 01 00:00:13 rpi2 NetworkManager[269]: <info> Loaded device plugin: NMEthernetFactory (internal) Jan 01 00:00:13 rpi2 NetworkManager[269]: <info> Loaded device plugin: NMBridgeFactory (internal) Jan 01 00:00:13 rpi2 NetworkManager[269]: <info> Loaded device plugin: NMBondFactory (internal) Jan 01 00:00:13 rpi2 NetworkManager[269]: <info> Loaded device plugin: NMTeamFactory (/usr/lib/NetworkManager/libnm-device-plugin-team.so) Jan 01 00:00:13 rpi2 NetworkManager[269]: <info> Loaded device plugin: NMWifiFactory (/usr/lib/NetworkManager/libnm-device-plugin-wifi.so) Jan 01 00:00:13 rpi2 NetworkManager[269]: <info> WiFi enabled by radio killswitch; enabled by state file Jan 01 00:00:13 rpi2 NetworkManager[269]: <info> WWAN enabled by radio killswitch; enabled by state file Jan 01 00:00:13 rpi2 NetworkManager[269]: <info> WiMAX enabled by radio killswitch; enabled by state file Jan 01 00:00:13 rpi2 NetworkManager[269]: <info> Networking is enabled by state file Jan 01 00:00:13 rpi2 NetworkManager[269]: <info> (lo): link connected Jan 01 00:00:13 rpi2 NetworkManager[269]: <info> (lo): new Generic device (carrier: ON, driver: 'unknown', ifindex: 1) Jan 01 00:00:13 rpi2 NetworkManager[269]: <info> (eth0): new Ethernet device (carrier: OFF, driver: 'smsc95xx', ifindex: 2) Jan 01 00:00:13 rpi2 NetworkManager[269]: <info> (eth0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Jan 01 00:00:13 rpi2 kernel: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Jan 01 00:00:13 rpi2 kernel: smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup Jan 01 00:00:13 rpi2 kernel: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Jan 01 00:00:13 rpi2 dbus[193]: [system] Activating via systemd: service name='org.freedesktop.PolicyKit1' unit='polkit.service' Jan 01 00:00:13 rpi2 dbus-daemon[193]: dbus[193]: [system] Activating via systemd: service name='org.freedesktop.PolicyKit1' unit='polkit.service' Jan 01 00:00:13 rpi2 systemd[1]: Starting Authorization Manager... -- Subject: Unit polkit.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit polkit.service has begun starting up. Jan 01 00:00:13 rpi2 dbus[193]: [system] Activating via systemd: service name='fi.w1.wpa_supplicant1' unit='wpa_supplicant.service' Jan 01 00:00:13 rpi2 systemd[1]: Configuration file /usr/lib/systemd/system/wpa_supplicant.service is marked executable. Please remove executable permission bits. Proceeding anyway. Jan 01 00:00:13 rpi2 dbus-daemon[193]: dbus[193]: [system] Activating via systemd: service name='fi.w1.wpa_supplicant1' unit='wpa_supplicant.service' Jan 01 00:00:13 rpi2 systemd[1]: Starting WPA Supplicant daemon... -- Subject: Unit wpa_supplicant.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit wpa_supplicant.service has begun starting up. Jan 01 00:00:13 rpi2 dbus[193]: [system] Successfully activated service 'fi.w1.wpa_supplicant1' Jan 01 00:00:13 rpi2 dbus-daemon[193]: dbus[193]: [system] Successfully activated service 'fi.w1.wpa_supplicant1' Jan 01 00:00:13 rpi2 systemd[1]: Started WPA Supplicant daemon. -- Subject: Unit wpa_supplicant.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit wpa_supplicant.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:13 rpi2 NetworkManager[269]: <info> wpa_supplicant running Jan 01 00:00:13 rpi2 polkitd[319]: Started polkitd version 0.112 Jan 01 00:00:13 rpi2 polkitd[319]: Loading rules from directory /etc/polkit-1/rules.d Jan 01 00:00:13 rpi2 polkitd[319]: Loading rules from directory /usr/share/polkit-1/rules.d Jan 01 00:00:14 rpi2 polkitd[319]: Finished loading, compiling and executing 2 rules Jan 01 00:00:14 rpi2 dbus[193]: [system] Successfully activated service 'org.freedesktop.PolicyKit1' Jan 01 00:00:14 rpi2 dbus-daemon[193]: dbus[193]: [system] Successfully activated service 'org.freedesktop.PolicyKit1' Jan 01 00:00:14 rpi2 systemd[1]: Started Authorization Manager. -- Subject: Unit polkit.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit polkit.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:14 rpi2 polkitd[319]: Acquired the name org.freedesktop.PolicyKit1 on the system bus Jan 01 00:00:14 rpi2 kernel: smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1 Jan 01 00:00:14 rpi2 kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Jan 01 00:00:14 rpi2 NetworkManager[269]: <info> (eth0): link connected Jan 01 00:00:14 rpi2 NetworkManager[269]: <info> (eth0): device state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 40] Jan 01 00:00:14 rpi2 NetworkManager[269]: <info> Auto-activating connection 'eth0'. Jan 01 00:00:14 rpi2 NetworkManager[269]: <info> (eth0): Activation: starting connection 'eth0' (0cb1274f-af94-4a51-a5bc-7608a1e37d63) Jan 01 00:00:14 rpi2 NetworkManager[269]: <info> (eth0): device state change: disconnected -> prepare (reason 'none') [30 40 0] Jan 01 00:00:14 rpi2 NetworkManager[269]: <info> NetworkManager state is now CONNECTING Jan 01 00:00:14 rpi2 NetworkManager[269]: <info> (eth0): device state change: prepare -> config (reason 'none') [40 50 0] Jan 01 00:00:18 rpi2 NetworkManager[269]: <info> (eth0): device state change: config -> ip-config (reason 'none') [50 70 0] Jan 01 00:00:18 rpi2 NetworkManager[269]: <info> Activation (eth0) Beginning DHCPv4 transaction (timeout in 45 seconds) Jan 01 00:00:19 rpi2 NetworkManager[269]: <info> dhclient started with pid 564 Jan 01 00:00:19 rpi2 dhclient[564]: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 (xid=0x58650026) Jan 01 00:00:19 rpi2 dhclient[564]: DHCPREQUEST on eth0 to 255.255.255.255 port 67 (xid=0x58650026) Jan 01 00:00:19 rpi2 dhclient[564]: DHCPOFFER from 192.168.155.2 Jan 01 00:00:19 rpi2 dhclient[564]: DHCPACK from 192.168.155.2 (xid=0x58650026) Jan 01 00:00:19 rpi2 dhclient[564]: suspect value in | option - discarded Jan 01 00:00:19 rpi2 NetworkManager[269]: <info> address 192.168.155.116 Jan 01 00:00:19 rpi2 dhclient[564]: bound to 192.168.155.116 -- renewal in 898 seconds. Jan 01 00:00:19 rpi2 NetworkManager[269]: <info> plen 24 (255.255.255.0) Jan 01 00:00:19 rpi2 NetworkManager[269]: <info> gateway 192.168.155.2 Jan 01 00:00:19 rpi2 NetworkManager[269]: <info> server identifier 192.168.155.2 Jan 01 00:00:19 rpi2 NetworkManager[269]: <info> lease time 1800 Jan 01 00:00:19 rpi2 NetworkManager[269]: <info> nameserver '192.168.155.2' Jan 01 00:00:19 rpi2 NetworkManager[269]: <info> domain name 'daku.org' Jan 01 00:00:19 rpi2 NetworkManager[269]: <info> (eth0): DHCPv4 state changed unknown -> bound Jan 01 00:00:19 rpi2 NetworkManager[269]: <info> (eth0): device state change: ip-config -> ip-check (reason 'none') [70 80 0] Jan 01 00:00:19 rpi2 NetworkManager[269]: <info> (eth0): device state change: ip-check -> secondaries (reason 'none') [80 90 0] Jan 01 00:00:19 rpi2 NetworkManager[269]: <info> (eth0): device state change: secondaries -> activated (reason 'none') [90 100 0] Jan 01 00:00:19 rpi2 NetworkManager[269]: <info> NetworkManager state is now CONNECTED_LOCAL Jan 01 00:00:19 rpi2 NetworkManager[269]: <info> NetworkManager state is now CONNECTED_GLOBAL Jan 01 00:00:19 rpi2 NetworkManager[269]: <info> Policy set 'eth0' (eth0) as default for IPv4 routing and DNS. Jan 01 00:00:19 rpi2 NetworkManager[269]: <info> (eth0): Activation: successful, device activated. Jan 01 00:00:19 rpi2 dbus[193]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' Jan 01 00:00:19 rpi2 dbus-daemon[193]: dbus[193]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' Jan 01 00:00:19 rpi2 systemd[1]: Starting Network Manager Script Dispatcher Service... -- Subject: Unit NetworkManager-dispatcher.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit NetworkManager-dispatcher.service has begun starting up. Jan 01 00:00:19 rpi2 sshd-keygen[199]: Generating SSH2 RSA host key: [ OK ] Jan 01 00:00:19 rpi2 dbus[193]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Jan 01 00:00:19 rpi2 systemd[1]: Started Network Manager Script Dispatcher Service. -- Subject: Unit NetworkManager-dispatcher.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit NetworkManager-dispatcher.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:19 rpi2 dbus-daemon[193]: dbus[193]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Jan 01 00:00:19 rpi2 nm-dispatcher[571]: Dispatching action 'up' for eth0 Jan 01 00:00:19 rpi2 sshd-keygen[199]: Generating SSH2 ECDSA host key: [ OK ] Jan 01 00:00:19 rpi2 sshd-keygen[199]: Generating SSH2 ED25519 host key: [ OK ] Jan 01 00:00:19 rpi2 systemd[1]: Started OpenSSH Server Key Generation. -- Subject: Unit sshd-keygen.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit sshd-keygen.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:20 rpi2 NetworkManager[269]: <info> startup complete Jan 01 00:00:20 rpi2 systemd[1]: Started Network Manager Wait Online. -- Subject: Unit NetworkManager-wait-online.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit NetworkManager-wait-online.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:20 rpi2 systemd[1]: Starting LSB: Bring up/down networking... -- Subject: Unit network.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit network.service has begun starting up. Jan 01 00:00:20 rpi2 systemd[1]: network.service: control process exited, code=exited status=6 Jan 01 00:00:20 rpi2 systemd[1]: Failed to start LSB: Bring up/down networking. -- Subject: Unit network.service has failed -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit network.service has failed. -- -- The result is failed. Jan 01 00:00:20 rpi2 systemd[1]: Unit network.service entered failed state. Jan 01 00:00:20 rpi2 systemd[1]: network.service failed. Jan 01 00:00:20 rpi2 systemd[1]: Reached target Network. -- Subject: Unit network.target has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit network.target has finished starting up. -- -- The start-up result is done. Jan 01 00:00:20 rpi2 systemd[1]: Starting Network. -- Subject: Unit network.target has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit network.target has begun starting up. Jan 01 00:00:20 rpi2 systemd[1]: Started OpenSSH server daemon. -- Subject: Unit sshd.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit sshd.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:20 rpi2 systemd[1]: Starting OpenSSH server daemon... -- Subject: Unit sshd.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit sshd.service has begun starting up. Jan 01 00:00:20 rpi2 systemd[1]: Starting Postfix Mail Transport Agent... -- Subject: Unit postfix.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit postfix.service has begun starting up. Jan 01 00:00:20 rpi2 systemd[1]: Reached target Network is Online. -- Subject: Unit network-online.target has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit network-online.target has finished starting up. -- -- The start-up result is done. Jan 01 00:00:20 rpi2 systemd[1]: Starting Network is Online. -- Subject: Unit network-online.target has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit network-online.target has begun starting up. Jan 01 00:00:20 rpi2 systemd[1]: Starting Crash recovery kernel arming... -- Subject: Unit kdump.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit kdump.service has begun starting up. Jan 01 00:00:20 rpi2 systemd[1]: Starting Dynamic System Tuning Daemon... -- Subject: Unit tuned.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit tuned.service has begun starting up. Jan 01 00:00:20 rpi2 sshd[605]: Server listening on 0.0.0.0 port 22. Jan 01 00:00:20 rpi2 sshd[605]: Server listening on :: port 22. Jan 01 00:00:22 rpi2 systemd[1]: Started Dynamic System Tuning Daemon. -- Subject: Unit tuned.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit tuned.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:23 rpi2 kdumpctl[607]: Kdump is not supported on this kernel Jan 01 00:00:23 rpi2 kdumpctl[607]: Starting kdump: [FAILED] Jan 01 00:00:23 rpi2 systemd[1]: kdump.service: main process exited, code=exited, status=1/FAILURE Jan 01 00:00:23 rpi2 systemd[1]: Failed to start Crash recovery kernel arming. -- Subject: Unit kdump.service has failed -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit kdump.service has failed. -- -- The result is failed. Jan 01 00:00:23 rpi2 systemd[1]: Unit kdump.service entered failed state. Jan 01 00:00:23 rpi2 systemd[1]: kdump.service failed. Jan 01 00:00:24 rpi2 postfix/postfix-script[1216]: starting the Postfix mail system Jan 01 00:00:24 rpi2 postfix/master[1218]: daemon started -- version 2.10.1, configuration /etc/postfix Jan 01 00:00:24 rpi2 systemd[1]: Started Postfix Mail Transport Agent. -- Subject: Unit postfix.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit postfix.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:24 rpi2 systemd[1]: Reached target Multi-User System. -- Subject: Unit multi-user.target has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit multi-user.target has finished starting up. -- -- The start-up result is done. Jan 01 00:00:24 rpi2 systemd[1]: Starting Multi-User System. -- Subject: Unit multi-user.target has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit multi-user.target has begun starting up. Jan 01 00:00:24 rpi2 systemd[1]: Reached target Graphical Interface. -- Subject: Unit graphical.target has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit graphical.target has finished starting up. -- -- The start-up result is done. Jan 01 00:00:24 rpi2 systemd[1]: Starting Graphical Interface. -- Subject: Unit graphical.target has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit graphical.target has begun starting up. Jan 01 00:00:24 rpi2 systemd[1]: Started Stop Read-Ahead Data Collection 10s After Completed Startup. -- Subject: Unit systemd-readahead-done.timer has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-readahead-done.timer has finished starting up. -- -- The start-up result is done. Jan 01 00:00:24 rpi2 systemd[1]: Starting Stop Read-Ahead Data Collection 10s After Completed Startup. -- Subject: Unit systemd-readahead-done.timer has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-readahead-done.timer has begun starting up. Jan 01 00:00:24 rpi2 systemd[1]: Starting Update UTMP about System Runlevel Changes... -- Subject: Unit systemd-update-utmp-runlevel.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-update-utmp-runlevel.service has begun starting up. Jan 01 00:00:25 rpi2 systemd[1]: Started Update UTMP about System Runlevel Changes. -- Subject: Unit systemd-update-utmp-runlevel.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-update-utmp-runlevel.service has finished starting up. -- -- The start-up result is done. Jan 01 00:00:25 rpi2 systemd[1]: Startup finished in 2.388s (kernel) + 22.636s (userspace) = 25.025s. -- Subject: System start-up is now complete -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- All system services necessary queued for starting at boot have been -- successfully started. Note that this does not mean that the machine is -- now idle as services might still be busy with completing start-up. -- -- Kernel start-up required 2388988 microseconds. -- -- Initial RAM disk start-up required INITRD_USEC microseconds. -- -- Userspace start-up required 22636223 microseconds. Jan 01 00:00:49 rpi2 login[214]: pam_unix(login:account): account root has password changed in future Jan 01 00:00:49 rpi2 systemd[1]: Created slice user-0.slice. -- Subject: Unit user-0.slice has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit user-0.slice has finished starting up. -- -- The start-up result is done. Jan 01 00:00:49 rpi2 systemd[1]: Starting user-0.slice. -- Subject: Unit user-0.slice has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit user-0.slice has begun starting up. Jan 01 00:00:49 rpi2 systemd-logind[201]: New session c1 of user root. -- Subject: A new session c1 has been created for user root -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- Documentation: http://www.freedesktop.org/wiki/Software/systemd/multiseat -- -- A new session with the ID c1 has been created for the user root. -- -- The leading process of the session is 214. Jan 01 00:00:49 rpi2 systemd[1]: Started Session c1 of user root. -- Subject: Unit session-c1.scope has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit session-c1.scope has finished starting up. -- -- The start-up result is done. Jan 01 00:00:49 rpi2 systemd[1]: Starting Session c1 of user root. -- Subject: Unit session-c1.scope has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit session-c1.scope has begun starting up. Jan 01 00:00:49 rpi2 login[214]: pam_unix(login:session): session opened for user root by LOGIN(uid=0) Jan 01 00:00:49 rpi2 login[214]: ROOT LOGIN ON tty1 Jan 01 00:00:55 rpi2 systemd[1]: Starting Stop Read-Ahead Data Collection... -- Subject: Unit systemd-readahead-done.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-readahead-done.service has begun starting up. Jan 01 00:00:55 rpi2 systemd[1]: Started Stop Read-Ahead Data Collection. -- Subject: Unit systemd-readahead-done.service has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit systemd-readahead-done.service has finished starting up. -- -- The start-up result is done. Jan 01 00:01:01 rpi2 crond[1255]: pam_unix(crond:account): account root has password changed in future Jan 01 00:01:01 rpi2 systemd[1]: Started Session c2 of user root. -- Subject: Unit session-c2.scope has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit session-c2.scope has finished starting up. -- -- The start-up result is done. Jan 01 00:01:01 rpi2 systemd[1]: Starting Session c2 of user root. -- Subject: Unit session-c2.scope has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit session-c2.scope has begun starting up. Jan 01 00:01:01 rpi2 CROND[1264]: (root) CMD (run-parts /etc/cron.hourly) Jan 01 00:01:01 rpi2 run-parts(/etc/cron.hourly)[1267]: starting 0anacron Jan 01 00:01:01 rpi2 anacron[1273]: Anacron started on 1970-01-01 Jan 01 00:01:01 rpi2 anacron[1273]: Will run job `cron.daily' in 13 min. Jan 01 00:01:01 rpi2 anacron[1273]: Will run job `cron.weekly' in 33 min. Jan 01 00:01:01 rpi2 anacron[1273]: Will run job `cron.monthly' in 53 min. Jan 01 00:01:01 rpi2 anacron[1273]: Jobs will be executed sequentially Jan 01 00:01:01 rpi2 run-parts(/etc/cron.hourly)[1275]: finished 0anacron Jan 01 00:01:01 rpi2 run-parts(/etc/cron.hourly)[1277]: starting 0yum-hourly.cron Jan 01 00:01:01 rpi2 run-parts(/etc/cron.hourly)[1281]: finished 0yum-hourly.cron Jan 01 00:02:28 rpi2 polkitd[319]: Registered Authentication Agent for unix-process:1299:14877 (system bus name :1.12 [/usr/bin/pkttyagent --notify-fd 5 --fallback], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) Jan 01 00:02:28 rpi2 systemd[1]: Starting LSB: Bring up/down networking... -- Subject: Unit network.service has begun start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit network.service has begun starting up. Jan 01 00:02:28 rpi2 systemd[1]: network.service: control process exited, code=exited status=6 Jan 01 00:02:28 rpi2 systemd[1]: Failed to start LSB: Bring up/down networking. -- Subject: Unit network.service has failed -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit network.service has failed. -- -- The result is failed. Jan 01 00:02:28 rpi2 systemd[1]: Unit network.service entered failed state. Jan 01 00:02:28 rpi2 systemd[1]: network.service failed. Jan 01 00:02:28 rpi2 polkitd[319]: Unregistered Authentication Agent for unix-process:1299:14877 (system bus name :1.12, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus)

2 3

Problems with dnssec-keygen
by Robert Moskowitz 24 Dec '15

24 Dec '15

I am reading: https://www.centos.org/docs/5/html/Deployment_Guide-en-US/s1-bind-rndc.html I have bind installed and default config running. I have not applied my customizations yet. The first step I am taking is getting rndc.key created. So reading the guide I am trying to run (while logged in as root, and in /etc): dnssec-keygen -a hmac-md5 -b 256 -n HOST rndc.key The system is just sitting there and doing nothing. I have sshed as another session and do not see any processing being done by dnssec-keygen. This might be a problem with the current build. Anyone else try this?

2 4

First Centos7-armv7 server running live
by Robert Moskowitz 24 Dec '15

24 Dec '15

medon.htt-consult.com (a Cubieboard2) is now up running with the CentOS-Userland-7-armv7hl-Minimal-1511-CubieTruck image (with of course the Cubieboard2 uboot). This is basically my private webserver. I put files there that I want to share with other people. For example: http://medon.htt-consult.com/~rgm/cubieboard/ http://medon.htt-consult.com/~rgm/speaking/ Try walking up the tree, you should be blocked by a very simple trick. Thus people (and robots) should only know about those directories that I publish. It also servers a couple other functions for my local net. You are welcome to see what web performance on a simple get is like. My uplink is 3mb. If someone wants to recommend a performance monitoring feature I can add to this system, I will give it a go. This unit is running with selinux enforced, firewalld, and sshd moved; it might be somewhat secure. Anyway, thanks to all the builders and testers here so I could get to this point. Next on tap is working with bind. First I will be working with my internal bind server before I replace my public bind server.

1 0

Problems with apache
by Robert Moskowitz 23 Dec '15

23 Dec '15

I am trying to enable user_dir. It works on my production server, but I can't get this working. So I fix up userdir.conf file as specified (removing 'user_dir disabled', and uncommenting the other line). I have all permissions right: # ls -ls /home/ total 4 4 drwx--x--x. 4 rgm rgm 4096 Dec 23 11:01 rgm [root@medon conf.d]# ls -ls /home/rgm/ total 8 4 drwxrwxr-x. 2 rgm rgm 4096 Dec 23 11:01 mnt 4 drwxrwxr-x. 15 rgm rgm 4096 Dec 23 11:29 public_html [root@medon conf.d]# ls -ls /home/rgm/public_html/ total 64 4 drwxrwxr-x. 2 rgm rgm 4096 Aug 28 2014 Harpsichord 4 drwxrwxr-x. 2 rgm rgm 4096 Aug 28 2014 IIG 12 drwxrwxr-x. 2 rgm rgm 12288 Dec 21 09:44 biby 4 drwxrwxr-x. 2 rgm rgm 4096 Jan 1 2010 cubieboard 4 drwxrwxr-x. 4 rgm rgm 4096 Aug 28 2014 family 4 drwxrwxr-x. 2 rgm rgm 4096 Aug 29 2014 help 4 drwxrwxr-x. 3 rgm rgm 4096 Aug 28 2014 hip 4 drwxrwxr-x. 2 rgm rgm 4096 Dec 4 2012 icsalabs 4 drwxrwxr-x. 2 rgm rgm 4096 Aug 29 2014 ieee 4 drwxrwxr-x. 2 rgm rgm 4096 Aug 29 2014 ietf 4 -rw-rw-r--. 1 rgm rgm 12 Jan 21 2013 index.html 4 drwxrwxr-x. 2 rgm rgm 4096 Aug 28 2014 pogo 4 drwxrwxr-x. 2 rgm rgm 4096 Dec 14 17:40 redsleeve 4 drwxrwxr-x. 2 rgm rgm 4096 Jan 8 2010 speaking I have no other customization in /etc/httpd/conf.d/ http://192.168.160.4/~rgm works. index.html contains one line: Hello World and this displays. I have this index.html to stop robots and people from walking my private directory tree. But http://192.168.160.4/~rgm/biby fails. on medon.htt-consult.com/~rgm/biby (try it yourself), it produces a list of files. On the centos-arm server I see in /var/log/httpd/error_log: [Wed Dec 23 12:32:49.359323 2015] [negotiation:error] [pid 3208] (13)Permission denied: [client 192.168.160.20:38708] AH00686: cannot read directory for multi: /home/rgm/public_html/biby/ But the permissions are right. I see the autoindex.conf file, which is new with Centos7 (did not have it on Centos6), and I mv that file and restarted httpd, and still the error. Any ideas what to do?

1 2

selinux - wiki typo and setting prior to firstboot
by Robert Moskowitz 23 Dec '15

23 Dec '15

Minor typo in the wiki on selinux. It says to edit: /etc/syconfig/selinux That should be: /etc/sysconfig/selinux It took about 4 min on the reboot on my Cubieboard2, but of course it depends what you have added since install. I would like to enforce selinux from the firstboot. Seems I can mount the image and make these 3 changes prior to first boot and the system would come up inititally with selinux enforced? And looking at the fedora-arm-installer and what we would want in a centos-arm-installer, the Fedora install has to disable selinux. The Centos install would have to enforce selinux. So these edits that are in the wiki would need to be scripted and then, of course the instructions from the Fedora wiki cannot be directly brought over to the Centos wiki as we are doing the reverse of them in this case. Which brings the question of is the resize method used in the fedora-arm-installer the same as what we would use in the centos install? Could I specify both of switch selinux to enforce AND resize the partition in the install to take affect on firstboot?

2 3

semanage messages with selinux enforced
by Robert Moskowitz 22 Dec '15

22 Dec '15

So one of the first things I do on a new system is to move SSHD to a different port. The semanage command is now well documented in the config file: # semanage port -a -t ssh_port_t -p tcp 1234 That is not the port I use, but the port number is not important. I get the following messages. Note that on my Fedora notebooks and Fedora23-arm builds I do not get these messages with the same command: [ 2764.233201] SELinux: Class netlink_iscsi_socket not defined in policy. [ 2764.240183] SELinux: Class netlink_fib_lookup_socket not defined in policy. [ 2764.247573] SELinux: Class netlink_connector_socket not defined in policy. [ 2764.254900] SELinux: Class netlink_netfilter_socket not defined in policy. [ 2764.262239] SELinux: Class netlink_generic_socket not defined in policy. [ 2764.269398] SELinux: Class netlink_scsitransport_socket not defined in policy. [ 2764.277027] SELinux: Class netlink_rdma_socket not defined in policy. [ 2764.283880] SELinux: Class netlink_crypto_socket not defined in policy. [ 2764.290990] SELinux: Permission audit_read in class capability2 not defined in policy. [ 2764.299367] SELinux: Class binder not defined in policy. [ 2764.305053] SELinux: the above unknown classes and permissions will be allowed The semanage command seems to have worked, as I can connect to sshd on the port I moved it to. I don't know if this constitutes a bug to file a bug report or not. I did this on the serial console and maybe that is why I am seeing these messages. But I do it on the serial console port with F23-arm and don't get these messages.

1 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Arm-dev December 2015