Arm-dev

arm-dev@lists.centos.org

686 discussions

yum update failed
by Robert Moskowitz 03 Mar '19

03 Mar '19

new build on a Cubieboard 2. I used https://armv7.dev.centos.org/repos/images/CentOS-Userland-7-armv7hl-generic… with xzcat CentOS-Userland-7-armv7hl-generic-Minimal-1810-sda.raw.xz | sudo dd of=/dev/sdb status=progress bs=4M onto a sata HD. The uSD card has uboot only. Booted fine. First step was to do a yum update and it failed: Retrieving key from file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7 Importing GPG key 0xF4A80EB5: Userid : "CentOS-7 Key (CentOS 7 Official Signing Key) <security(a)centos.org>" Fingerprint: 6341 ab27 53d7 8a78 a7c2 7bb1 24c6 a8a7 f4a8 0eb5 Package : centos-userland-release-7-6.1810.2.el7.centos.armv7hl (@instCentOS/$releasever) From : /etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7 Is this ok [y/N]: y Retrieving key from file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-SIG-AltArch-Arm32 Importing GPG key 0x62505FE6: Userid : "CentOS AltArch SIG - Arm32 (https://wiki.centos.org/SpecialInterestGroup/AltArch/Arm32) <security(a)centos.org>" Fingerprint: 4d9e 39f1 499c a21d d289 77f8 cafe f11b 6250 5fe6 Package : centos-userland-release-7-6.1810.2.el7.centos.armv7hl (@instCentOS/$releasever) From : /etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-SIG-AltArch-Arm32 Is this ok [y/N]: y Running transaction check ERROR with transaction check vs depsolve: xorg-x11-drv-vmmouse >= 14.0.0 is needed by (installed) kernel-4.14.82-201.el7.armv7hl You could try running: rpm -Va --nofiles --nodigest Your transaction was saved, rerun it with: yum load-transaction /tmp/yum_save_tx.2019-03-03.04-01.uUyhcp.yumtx [root@localhost ~]# what do I need to do to get this install updated? thanks

2 2

Different issues with "DTOVERLAY".
by Stephan Guilloux 26 Feb '19

26 Feb '19

Hello, Small issues, today, with dtoverlay gpio-shutdown/poweroff [root@mypi ~]# dtoverlay gpio-shutdown su: user pi does not exist * Failed to apply overlay '1_gpio-shutdown' (kernel) su: user pi does not exist [root@mypi ~]# dtoverlay gpio-poweroff su: user pi does not exist su: user pi does not exist [root@mypi ~]# Even if I add a fake user "PI", this does not work better. [root@mypi ~]# useradd -r pi -p pi [root@mypi ~]# [root@mypi ~]# [root@mypi ~]# dtoverlay gpio-poweroff * Failed to apply overlay '2_gpio-poweroff' (kernel) [root@mypi ~]# dtoverlay gpio-shutdown * Failed to apply overlay '2_gpio-shutdown' (kernel) [root@mypi ~]# But when I check the overlay list, I get: [root@mypi ~]# dtoverlay -l Overlays (in load order): 0: gpio-shutdown 1: gpio-poweroff [root@mypi ~]# At least, something is done :-) Last problems: [root@mypi ~]# dtoverlay -h gpio-shutdown * Help file not found [root@mypi ~]# dtoverlay -h gpio-poweroff * Help file not found [root@mypi ~]# dtoverlay -h rpi-rtc * Help file not found [root@mypi ~]# dtoverlay -h rpi-display * Help file not found [root@mypi ~]# In case ... [root@mypi ~]# cat /proc/version Linux version 4.14.65-v7.1.el7 (mockbuild(a)armhfp-03.bsys.centos.org) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-28) (GCC)) #1 SMP Mon Aug 20 19:04:20 UTC 2018 [root@mypi ~]# [root@mypi ~]# rpm -qa 'raspberrypi-vc*' raspberrypi-vc-demo-source-20170705-502.gitaa39775.el7.noarch raspberrypi-vc-libs-20170705-502.gitaa39775.el7.armv7hl raspberrypi-vc-utils-20170705-502.gitaa39775.el7.armv7hl [root@mypi ~]# Stephan.

2 3

Re: [Arm-dev] Different issues with "DTOVERLAY".
by Stephan Guilloux 24 Feb '19

24 Feb '19

Hi Pablo, Found the cause for the Help problem. On CentOS, /boot/overlays/README is missing. It contains the help for all the dtoverlay commands... I got the file from its original distro, and I put it under /boot/overlays/README.rasp for the demo: [pi@myrpi ~]$ dtoverlay -h i2c-gpio * Help file not found [pi@myrpi ~]$ sudo mv /boot/overlays/README.rasp /boot/overlays/README [pi@myrpi ~]$ dtoverlay -h i2c-gpio Name: i2c-gpio Info: Adds support for software i2c controller on gpio pins Usage: dtoverlay=i2c-gpio,<param>=<val> Params: i2c_gpio_sda GPIO used for I2C data (default "23") i2c_gpio_scl GPIO used for I2C clock (default "24") i2c_gpio_delay_us Clock delay in microseconds (default "2" = ~100kHz) [pi@myrpi ~]$ Unfortunatelly, the files under this folder seem to belong to no package... [pi@myrpi ~]$ rpm -qf /boot/overlays/i2c-gpio.dtbo file /boot/overlays/i2c-gpio.dtbo is not owned by any package [pi@myrpi ~]$ So, I'm stuck there, for now ... Le lun. 24 sept. 2018 à 14:12, Stephan Guilloux < stephan.guilloux(a)crisalid.com> a écrit : > > > Le 24/09/2018 à 10:46, Pablo Sebastian Greco a écrit : > > > > El 24 sept 2018, a las 04:41, Stephan Guilloux < > stephan.guilloux(a)crisalid.com> escribió: > > Hello Pablo, > > Sorry for the direct mail. > > No problem. I'm on vacation this week so it is probably better > > Enjoy ;-) > > > I'll have a look, this week, but I need the sources that CentOS delivers. > I Tried to check on vault.centos.org, but no armhfp (only aarch64). > > You're right. I had touble finding it myself. It got lost when moving from > the old to the new build system. > Try here > https://armv7.dev.centos.org/repodir/c7-extras-1/raspberrypi-vc/20170705-50… > I'll update the srpm and probably github when I'm back but if you find the > problems, better. Hehe > > OK. Got it there. > Will inform you through the list, in case I find anything. > > > > Can you indicate where to find the current raspberrypi-vc-utils.src.rpm ? > > Regards, > > Stéphan. > > Thanks, Pablo > > > > Le 20/09/2018 à 13:02, Pablo Sebastián Greco a écrit : > > Stephan, sorry for the delay > El 10/9/18 a las 12:28, Stephan Guilloux escribió: > > Hello, > > Small issues, today, with dtoverlay gpio-shutdown/poweroff > > [root@mypi ~]# dtoverlay gpio-shutdown > su: user pi does not exist > * Failed to apply overlay '1_gpio-shutdown' (kernel) > su: user pi does not exist > [root@mypi ~]# dtoverlay gpio-poweroff > su: user pi does not exist > su: user pi does not exist > [root@mypi ~]# > > That seems to come from here ( > https://github.com/raspberrypi/userland/blob/master/host_applications/linux…) > If you run as root, it tries to run as the user "pi", as a normal > user(any), you shouldn't have that problem > > > Even if I add a fake user "PI", this does not work better. > > [root@mypi ~]# useradd -r pi -p pi > [root@mypi ~]# > [root@mypi ~]# > [root@mypi ~]# dtoverlay gpio-poweroff > * Failed to apply overlay '2_gpio-poweroff' (kernel) > [root@mypi ~]# dtoverlay gpio-shutdown > * Failed to apply overlay '2_gpio-shutdown' (kernel) > [root@mypi ~]# > > That bit seems to come from here ( > https://github.com/raspberrypi/userland/blob/2448644657e5fbfd82299416d21839…) > it fails to check if the overlay was actually applied > > > But when I check the overlay list, I get: > > [root@mypi ~]# dtoverlay -l > Overlays (in load order): > 0: gpio-shutdown > 1: gpio-poweroff > [root@mypi ~]# > > At least, something is done :-) > > That is a little stranger, why does it say it did something when the > command before said it failed??? > > Last problems: > [root@mypi ~]# dtoverlay -h gpio-shutdown > * Help file not found > [root@mypi ~]# dtoverlay -h gpio-poweroff > * Help file not found > [root@mypi ~]# dtoverlay -h rpi-rtc > * Help file not found > [root@mypi ~]# dtoverlay -h rpi-display > * Help file not found > [root@mypi ~]# > > > > I guess I'll have to add some debugging info and check in my rpi (as time > permits) > > In case ... > [root@mypi ~]# cat /proc/version > Linux version 4.14.65-v7.1.el7 (mockbuild(a)armhfp-03.bsys.centos.org) > (gcc version 4.8.5 20150623 (Red Hat 4.8.5-28) (GCC)) #1 SMP Mon Aug 20 > 19:04:20 UTC 2018 > [root@mypi ~]# > > [root@mypi ~]# rpm -qa 'raspberrypi-vc*' > raspberrypi-vc-demo-source-20170705-502.gitaa39775.el7.noarch > raspberrypi-vc-libs-20170705-502.gitaa39775.el7.armv7hl > raspberrypi-vc-utils-20170705-502.gitaa39775.el7.armv7hl > [root@mypi ~]# > > 2 questions > 1) has it ever worked before? > 2) which rpi exactly are you using? (don't know if it is really relevant). > > Thanks. > Pablo. > > > Stephan. > > P.S.: Today we built 4.14.71 and will be released as soon as it passes the > tests. > > > >

2 1

raspi 3b+ kernel module
by Skorpeo Skorpeo 19 Feb '19

19 Feb '19

Hi, I'm trying to use wireguard on a raspi 3b+ by compiling it. The raspi command output for uname -r shows 4.14.79-v7+, the extra "+" at the end is what I think is causing some troubles in getting it to work. It seems my best bet is to recompile the kernel so I wasn't sure where to find the right sources as it seems there's specific sources for the raspi? Any pointers appreciated!

2 2

efi for raspi 3
by Skorpeo Skorpeo 19 Feb '19

19 Feb '19

Looks like efi for raspi3 is upstream now: https://github.com/tianocore/edk2-platforms/tree/master/Platform/RaspberryP…

1 0

clock throttling
by Kristján Valur Jónsson 15 Feb '19

15 Feb '19

Hi there. Im running Centos on a RPi3. I came across a post about how the vidc throttles arm cpu speed to manage voltage drop and heat. So I ran the attached script. I have an official power supply, but still I'm getting the following output: 44.5'C 600/ 600 MHz 0000000000000000000 1.2V 600/ 600/1185 MHz 45.1'C 600/ 600 MHz 0000000000000000000 1.2V 600/ 600/1185 MHz Indicating a measured 1.2v input and 600MHz. What is curious is that none of the flag bits are set. my boot/config.txt contains no clockspeed options. does the CentOS distro come with its own GPU code? The ouptut does not match what I would expect. (I've tried replacing the PSU, with no effect) -- Kv, Kristján Valur Jónsson, RVX

1 0

Re: [Arm-dev] whatprovides sepol-ifgen?
by Patrick Laimbock 05 Feb '19

05 Feb '19

-----Original message----- > From:Robert Moskowitz <rgm(a)htt-consult.com> > Sent: Tuesday 5th February 2019 16:21 > To: Conversations around CentOS on ARM hardware <arm-dev(a)centos.org> > Subject: [Arm-dev] whatprovides sepol-ifgen? > > I am fighting to get dovecot working with mysql.sock with SELinux > enforced. And I am trying to do this 'better' than what I found 2 years > ago. On the SELiunx list I was told to run: > > ausearch -m AVC --context dovecot_t | audit2allow --reference -m > dovecot_mysql_custom > > But this generates the error > > could not open interface info [/var/lib/sepolgen/interface_info > > To fix this I was told to run > > sepol-ifgen Try sepolgen-ifgen. IIRC it lives in the policycoreutils-devel package. Patrick

2 1

whatprovides sepol-ifgen?
by Robert Moskowitz 05 Feb '19

05 Feb '19

I am fighting to get dovecot working with mysql.sock with SELinux enforced. And I am trying to do this 'better' than what I found 2 years ago. On the SELiunx list I was told to run: ausearch -m AVC --context dovecot_t | audit2allow --reference -m dovecot_mysql_custom But this generates the error could not open interface info [/var/lib/sepolgen/interface_info To fix this I was told to run sepol-ifgen But command not found. whatprovides comes up empty. Googling says it should be in policycoreutils which is already installed. Can anyone help me with sepol-ifgen, or the above command, or getting a SELinux policy that allows dovecot to connect to mysql.sock? thanks

1 0

kernel tools on CentOS-Userland-7-armv7hl-generic-Minimal-419-v26-1810-sda
by Robert Moskowitz 01 Feb '19

01 Feb '19

I just did a build of a new drive for my Odroid HC1. This includes doing a yum update. I see: kernel-tools armv7hl 4.14.91-201.el7 centos-kernel 149 k kernel-tools-libs armv7hl 4.14.91-201.el7 centos-kernel 74 k as part of the update. Is it a problem for kernel tools to be at 4.14 when the kernel is a 4.19?

2 1

Chrooting/Docker to armv7hl and armv5tel on aarch64
by Gordan Bobic 28 Jan '19

28 Jan '19

It's been so long since I last had to do this, that it looks like a kernel update somewhere along the way broke this for me. :-( What happens now: # chroot rs7 chroot: failed to run command ‘/bin/bash’: Exec format error I could have sworn that this was all I needed to make this work last time: # grep 4K_PAGES config-4.9.153-1.el7.centos.aarch64 CONFIG_ARM64_4K_PAGES=y # CONFIG_ARM64_64K_PAGES is not set Unfortunately, now trying to chroot into either hard-float or soft-float chroot results in the exec format error. Looking at time stamps of various things, I had this working with 4.4.70, but have since switched to 4.9.x kernels. Any thoughts on what changed between 4.4 and 4.9 would be most appreciated. What am I missing?

4 8

← Newer
1
...
7
8
9
10
11
12
13
...
69
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Arm-dev