Arm-dev

arm-dev@lists.centos.org

2 participants
685 discussions

Mailserver work
by Robert Moskowitz 26 Feb '17

26 Feb '17

So I have been spending way too much time on my new mailserver instead of other work. The howto do date is: http://medon.htt-consult.com/Centos7-mailserver.html This is all hand-coded html. I have learned a bit, and any tips are accepted. Some inconsistencies where I learned something, and did not go back and change all occurrences. I still need to USE postfixadmin to create a domain and a user. Then test postfix and dovecot and roundcubemail. I still have to configure amavis, clamav, spamasssassin, and maybe mailgraph.... Any review is appreciated. Bob

3 5

Borked deps
by Oden Eriksson 23 Feb '17

23 Feb '17

Hi, I started to build some stuff on my rpi3 with centos7 but got broken deps. Searched a bit and found https://bugzilla.redhat.com/show_bug.cgi?id=1326871 which indeed fixed the problem. Could you please apply the patch to rpm to have this fixed? Note, you need to rebuild rpm with the patch applied, install it with --nodeps and then rebuild rpm a second time (of course). Thanks in advance. Cheers.

1 0

libpango from rpmfind
by Robert Moskowitz 22 Feb '17

22 Feb '17

I need libpango for rrdtool, and libpango is OS specific. And I am not finding it at all in https://armv7.dev.centos.org/repodir/epel-pass-1/ But rpmfind found: ftp://195.220.108.108/linux/mageia/distrib/cauldron/armv7hl/media/core/release/libpango1.0_0-1.40.3-3.mga6.armv7hl.rpm Can I 'safely' use it? I also need libpangocairo.

3 8

I see new kernel armv7hl in update repo, but
by Robert Moskowitz 21 Feb '17

21 Feb '17

/boot/extlinux/extlinux.conf still needs to be hand edited. I will update my howto.

1 0

Looking for PI3 version that can do X windows
by Jerry Geis 16 Feb '17

16 Feb '17

Is there a version of CentOS for arm on the PI3 that does X windows? I tried the armv7hl for PI3 - but X windows does not come up. Thanks Jerry

5 14

Yum update problem with package in repo updates
by Robert Moskowitz 16 Feb '17

16 Feb '17

I just tried a 'yum update' in a server which was current as a few days ago. Looks like some updates got pushed out, but with an error: --> Finished Dependency Resolution Error: Package: firewalld-0.4.3.2-8.1.el7_3.noarch (updates) Requires: python-firewall = 0.4.3.2-8.1.el7_3 Installed: python-firewall-0.4.3.2-8.el7.noarch (@centos-base_rbf) python-firewall = 0.4.3.2-8.el7 So I tried: yum update --exclude=firewalld Error: Package: firewalld-0.4.3.2-8.el7.noarch (@centos-base_rbf) Requires: firewalld-filesystem = 0.4.3.2-8.el7 Removing: firewalld-filesystem-0.4.3.2-8.el7.noarch (@centos-base_rbf) firewalld-filesystem = 0.4.3.2-8.el7 Updated By: firewalld-filesystem-0.4.3.2-8.1.el7_3.noarch (updates) firewalld-filesystem = 0.4.3.2-8.1.el7_3 Then I tried: yum update --exclude=firewalld --exclude=firewalld-filesystem That worked. So ran yum update again and it failed as expected: Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile Resolving Dependencies --> Running transaction check ---> Package firewalld.noarch 0:0.4.3.2-8.el7 will be updated ---> Package firewalld.noarch 0:0.4.3.2-8.1.el7_3 will be an update --> Processing Dependency: python-firewall = 0.4.3.2-8.1.el7_3 for package: firewalld-0.4.3.2-8.1.el7_3.noarch ---> Package firewalld-filesystem.noarch 0:0.4.3.2-8.el7 will be updated ---> Package firewalld-filesystem.noarch 0:0.4.3.2-8.1.el7_3 will be an update --> Finished Dependency Resolution Error: Package: firewalld-0.4.3.2-8.1.el7_3.noarch (updates) Requires: python-firewall = 0.4.3.2-8.1.el7_3 Installed: python-firewall-0.4.3.2-8.el7.noarch (@centos-base_rbf) python-firewall = 0.4.3.2-8.el7 Hope you can get this fixed soon. Bob

2 2

Progress on C7-armv7
by Robert Moskowitz 15 Feb '17

15 Feb '17

I switched medon.htt-consult.com to another Cubieboard2; I took one of my test systems (which was off anyway, the middle one of the tower), put the C7 uboot mSD and HD, and booted up. I also switched over to the new kernel. So far it has been up for 6 hours, longer than before. We will see how it goes. I have set up a DNS server and letting it 'sit' for 24 hours to test for stability (not crashing). This is an internal DNS server (rigel.htt-consult.com). If all is well tomorrow I will put it into production, and start on migrating the production DNS server (onlo.htt-consult.com). And I have to learn how to config DNSSEC... I am holding off on any more work on the mailserver replacement (z9m9z.htt-consult.com) until my one epel dependency is fixed. The delay 'buys' me some time to figure out if I will buy a Cubie5 (4 core) for the new server. avmavis regularly eats up 2 core on my current RSEL6 mailserver. So progress. Thanks for the code to make this possible.

4 12

xfs_growfs step in disk image readme
by Christopher Covington 08 Feb '17

08 Feb '17

Hi Jim, If you're able, I think it would be handy to document using xfs_growfs in the disk image readme. ## Growing the disk image. ... sudo sgdisk -e -d4 -n4:0:0 /dev/<your-device> xfs_growfs / I'm not sure if rebooting in between is required or recommended. 1. http://mirror.centos.org/altarch/7/isos/aarch64/ReadMe.txt Thanks, Cov -- Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc. Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.

1 0

EFI u-boot for Gigabyte MP30-AR0
by Gordan Bobic 07 Feb '17

07 Feb '17

On Tue, Feb 7, 2017 at 10:39 AM, Marcin Juszkiewicz < marcin.juszkiewicz(a)linaro.org> wrote: > W dniu 03.02.2017 o 16:45, Gordan Bobic pisze: > > Does anybody know if there is such a thing as a recent u-boot with > > loadefi command for the Gigabyte MP30-AR0? > > IIRC no one works on U-Boot for this platform. > > > It'd be really handy to be able to bypass Tianocore EFI firmware. > > What is wrong with it? > There is nothing wrong with it per se, it's just an extra moving part that happens to take a minute or so to boot itself. And u-boot is far more powerful in terms of features.

1 0

EFI u-boot for Gigabyte MP30-AR0
by Gordan Bobic 07 Feb '17

07 Feb '17

Does anybody know if there is such a thing as a recent u-boot with loadefi command for the Gigabyte MP30-AR0? It'd be really handy to be able to bypass Tianocore EFI firmware. TIA. Gordan

2 1

← Newer
1
...
30
31
32
33
34
35
36
...
69
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Arm-dev