On 12/24/2015 05:39 PM, david wrote:
Folks
I'm playing with a Raspberry Pi 2 and Centos. Here are some issues I've bumped into. I'm not sure this is the right medium for commenting; please correct me if needed.
I wrote a copy of the distributed image (1151) to my MicroSD card, then turned on the Rpi2.
Issue 1: Even though my DHCP server was configured to give the node a name, it showed up as "rpi2" as the host name.
I use:
hostnamectl set-hostname <fqdn>
There are lots of places where hostname is and this controls all of them. Or so I have been told.
Issue 2: Network works, but if I issue the command systemctl reset network the command fails and I haven't found a way to get the network back. I saved the output of "journalctl -ce", rebooted, and installed "ftp" so I could copy the data to a real machine. The text is as below. I issued the "systemctl reset network" command towards the bottom, where you see the time jump from 00:01:01 to 00:02:28
-- Logs begin at Thu 1970-01-01 00:00:04 UTC, end at Thu 1970-01-01 00:02:28 UTC. -- Jan 01 00:00:04 rpi2 systemd-journal[81]: Runtime journal is using 5.7M (max allowed 46.3M, trying to leave 69.4M free of 457.1M available ? current limit 46.3M). Jan 01 00:00:04 rpi2 systemd-journal[81]: Runtime journal is using 5.7M (max allowed 46.3M, trying to leave 69.4M free of 457.1M available ? current limit 46.3M). Jan 01 00:00:04 rpi2 kernel: Booting Linux on physical CPU 0xf00 Jan 01 00:00:04 rpi2 kernel: Initializing cgroup subsys cpuset Jan 01 00:00:04 rpi2 kernel: Initializing cgroup subsys cpu Jan 01 00:00:04 rpi2 kernel: Initializing cgroup subsys cpuacct Jan 01 00:00:04 rpi2 kernel: Linux version 4.1.11-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.8.3 20140303 (prerelease) (crosstool-NG linaro-1.13.1+bzr2650 - Linaro GCC 2014.03) ) #822 SMP PREEMPT Fri Oct 23 16:22:18 BST 2015 Jan 01 00:00:04 rpi2 kernel: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d Jan 01 00:00:04 rpi2 kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Jan 01 00:00:04 rpi2 kernel: Machine: BCM2709 Jan 01 00:00:04 rpi2 kernel: cma: Reserved 8 MiB at 0x3a800000 Jan 01 00:00:04 rpi2 kernel: Memory policy: Data cache writealloc Jan 01 00:00:04 rpi2 kernel: On node 0 totalpages: 241664 Jan 01 00:00:04 rpi2 kernel: free_area_init_node: node 0, pgdat 80859000, node_mem_map b9fa6000 Jan 01 00:00:04 rpi2 kernel: Normal zone: 2124 pages used for memmap Jan 01 00:00:04 rpi2 kernel: Normal zone: 0 pages reserved Jan 01 00:00:04 rpi2 kernel: Normal zone: 241664 pages, LIFO batch:31 Jan 01 00:00:04 rpi2 kernel: [bcm2709_smp_init_cpus] enter (9420->f3003010) Jan 01 00:00:04 rpi2 kernel: [bcm2709_smp_init_cpus] ncores=4 Jan 01 00:00:04 rpi2 kernel: PERCPU: Embedded 13 pages/cpu @b9f6d000 s20608 r8192 d24448 u53248 Jan 01 00:00:04 rpi2 kernel: pcpu-alloc: s20608 r8192 d24448 u53248 alloc=13*4096 Jan 01 00:00:04 rpi2 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Jan 01 00:00:04 rpi2 kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 239540 Jan 01 00:00:04 rpi2 kernel: Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1872 bcm2708_fb.fbheight=1168 bcm2709.boardrev=0xa21041 bcm2709.serial=0x72e14965 smsc95xx.macaddr=B8:27:EB:E1:49:65 bcm2708_fb.fbswap=1 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p3 rootfstype=ext4 elevator=deadline rootwait Jan 01 00:00:04 rpi2 kernel: PID hash table entries: 4096 (order: 2, 16384 bytes) Jan 01 00:00:04 rpi2 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Jan 01 00:00:04 rpi2 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Jan 01 00:00:04 rpi2 kernel: Memory: 939572K/966656K available (5955K kernel code, 534K rwdata, 1644K rodata, 416K init, 757K bss, 18892K reserved, 8192K cma-reserved) Jan 01 00:00:04 rpi2 kernel: Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xbb800000 - 0xff000000 (1080 MB) lowmem : 0x80000000 - 0xbb000000 ( 944 MB) modules : 0x7f000000 - 0x80000000 ( 16 MB) .text : 0x80008000 - 0x80773e88 (7600 kB) .init : 0x80774000 - 0x807dc000 ( 416 kB) .data : 0x807dc000 - 0x80861b6c ( 535 kB) .bss : 0x80864000 - 0x8092179c ( 758 kB) Jan 01 00:00:04 rpi2 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Jan 01 00:00:04 rpi2 kernel: Preemptible hierarchical RCU implementation. Jan 01 00:00:04 rpi2 kernel: Additional per-CPU info printed with stalls. Jan 01 00:00:04 rpi2 kernel: NR_IRQS:608 Jan 01 00:00:04 rpi2 kernel: Architected cp15 timer(s) running at 19.20MHz (phys). Jan 01 00:00:04 rpi2 kernel: clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns Jan 01 00:00:04 rpi2 kernel: sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns Jan 01 00:00:04 rpi2 kernel: Switching to timer-based delay loop, resolution 52ns Jan 01 00:00:04 rpi2 kernel: Console: colour dummy device 80x30 Jan 01 00:00:04 rpi2 kernel: console [tty1] enabled Jan 01 00:00:04 rpi2 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) Jan 01 00:00:04 rpi2 kernel: pid_max: default: 32768 minimum: 301 Jan 01 00:00:04 rpi2 kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) Jan 01 00:00:04 rpi2 kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) Jan 01 00:00:04 rpi2 kernel: Initializing cgroup subsys blkio Jan 01 00:00:04 rpi2 kernel: Initializing cgroup subsys memory Jan 01 00:00:04 rpi2 kernel: Initializing cgroup subsys devices Jan 01 00:00:04 rpi2 kernel: Initializing cgroup subsys freezer Jan 01 00:00:04 rpi2 kernel: Initializing cgroup subsys net_cls Jan 01 00:00:04 rpi2 kernel: CPU: Testing write buffer coherency: ok Jan 01 00:00:04 rpi2 kernel: ftrace: allocating 20224 entries in 60 pages Jan 01 00:00:04 rpi2 kernel: missing device node for CPU 0 Jan 01 00:00:04 rpi2 kernel: missing device node for CPU 1 Jan 01 00:00:04 rpi2 kernel: missing device node for CPU 2 Jan 01 00:00:04 rpi2 kernel: missing device node for CPU 3 Jan 01 00:00:04 rpi2 kernel: CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00 Jan 01 00:00:04 rpi2 kernel: [bcm2709_smp_prepare_cpus] enter Jan 01 00:00:04 rpi2 kernel: Setting up static identity map for 0x8240
- 0x8274
Jan 01 00:00:04 rpi2 kernel: [bcm2709_boot_secondary] cpu:1 started (0) 16 Jan 01 00:00:04 rpi2 kernel: [bcm2709_secondary_init] enter cpu:1 Jan 01 00:00:04 rpi2 kernel: CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01 Jan 01 00:00:04 rpi2 kernel: [bcm2709_boot_secondary] cpu:2 started (0) 18 Jan 01 00:00:04 rpi2 kernel: [bcm2709_secondary_init] enter cpu:2 Jan 01 00:00:04 rpi2 kernel: CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02 Jan 01 00:00:04 rpi2 kernel: [bcm2709_boot_secondary] cpu:3 started (0) 18 Jan 01 00:00:04 rpi2 kernel: [bcm2709_secondary_init] enter cpu:3 Jan 01 00:00:04 rpi2 kernel: CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03 Jan 01 00:00:04 rpi2 kernel: Brought up 4 CPUs Jan 01 00:00:04 rpi2 kernel: SMP: Total of 4 processors activated (153.60 BogoMIPS). Jan 01 00:00:04 rpi2 kernel: CPU: All CPU(s) started in HYP mode. Jan 01 00:00:04 rpi2 kernel: CPU: Virtualization extensions available. Jan 01 00:00:04 rpi2 kernel: devtmpfs: initialized Jan 01 00:00:04 rpi2 kernel: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 Jan 01 00:00:04 rpi2 kernel: clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Jan 01 00:00:04 rpi2 kernel: pinctrl core: initialized pinctrl subsystem Jan 01 00:00:04 rpi2 kernel: NET: Registered protocol family 16 Jan 01 00:00:04 rpi2 kernel: DMA: preallocated 4096 KiB pool for atomic coherent allocations Jan 01 00:00:04 rpi2 kernel: bcm2709.uart_clock = 3000000 Jan 01 00:00:04 rpi2 kernel: of_platform_populate failed: -22 Jan 01 00:00:04 rpi2 kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Jan 01 00:00:04 rpi2 kernel: hw-breakpoint: maximum watchpoint size is 8 bytes. Jan 01 00:00:04 rpi2 kernel: Serial: AMBA PL011 UART driver Jan 01 00:00:04 rpi2 kernel: dev:f1: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev3 Jan 01 00:00:04 rpi2 kernel: console [ttyAMA0] enabled Jan 01 00:00:04 rpi2 kernel: bcm2835-mbox bcm2835-mbox: mailbox enabled Jan 01 00:00:04 rpi2 kernel: bcm2708-dmaengine bcm2708-dmaengine: DMA legacy API manager at f3007000, dmachans=0x7f35 Jan 01 00:00:04 rpi2 kernel: bcm2708-dmaengine bcm2708-dmaengine: failed to get irq for DMA channel 13 Jan 01 00:00:04 rpi2 kernel: bcm2708-dmaengine bcm2708-dmaengine: Initialized 8 DMA channels (+ 1 legacy) Jan 01 00:00:04 rpi2 kernel: bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driver Jan 01 00:00:04 rpi2 kernel: bcm2708-dmaengine bcm2708-dmaengine: dma_debug:0 Jan 01 00:00:04 rpi2 kernel: SCSI subsystem initialized Jan 01 00:00:04 rpi2 kernel: usbcore: registered new interface driver usbfs Jan 01 00:00:04 rpi2 kernel: usbcore: registered new interface driver hub Jan 01 00:00:04 rpi2 kernel: usbcore: registered new device driver usb Jan 01 00:00:04 rpi2 kernel: raspberrypi-firmware raspberrypi-firmware.0: Attached to firmware from 2015-10-23 16:24 Jan 01 00:00:04 rpi2 kernel: Switched to clocksource arch_sys_counter Jan 01 00:00:04 rpi2 kernel: FS-Cache: Loaded Jan 01 00:00:04 rpi2 kernel: CacheFiles: Loaded Jan 01 00:00:04 rpi2 kernel: NET: Registered protocol family 2 Jan 01 00:00:04 rpi2 kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes) Jan 01 00:00:04 rpi2 kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes) Jan 01 00:00:04 rpi2 kernel: TCP: Hash tables configured (established 8192 bind 8192) Jan 01 00:00:04 rpi2 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes) Jan 01 00:00:04 rpi2 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) Jan 01 00:00:04 rpi2 kernel: NET: Registered protocol family 1 Jan 01 00:00:04 rpi2 kernel: RPC: Registered named UNIX socket transport module. Jan 01 00:00:04 rpi2 kernel: RPC: Registered udp transport module. Jan 01 00:00:04 rpi2 kernel: RPC: Registered tcp transport module. Jan 01 00:00:04 rpi2 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module. Jan 01 00:00:04 rpi2 kernel: bcm2708_gpio: bcm2708_gpio_probe 80800a68 Jan 01 00:00:04 rpi2 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes) Jan 01 00:00:04 rpi2 kernel: VFS: Disk quotas dquot_6.6.0 Jan 01 00:00:04 rpi2 kernel: VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jan 01 00:00:04 rpi2 kernel: FS-Cache: Netfs 'nfs' registered for caching Jan 01 00:00:04 rpi2 kernel: NFS: Registering the id_resolver key type Jan 01 00:00:04 rpi2 kernel: Key type id_resolver registered Jan 01 00:00:04 rpi2 kernel: Key type id_legacy registered Jan 01 00:00:04 rpi2 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) Jan 01 00:00:04 rpi2 kernel: io scheduler noop registered Jan 01 00:00:04 rpi2 kernel: io scheduler deadline registered (default) Jan 01 00:00:04 rpi2 kernel: io scheduler cfq registered Jan 01 00:00:04 rpi2 kernel: BCM2708FB: allocated DMA memory fac00000 Jan 01 00:00:04 rpi2 kernel: BCM2708FB: allocated DMA channel 0 @ f3007000 Jan 01 00:00:04 rpi2 kernel: Console: switching to colour frame buffer device 234x73 Jan 01 00:00:04 rpi2 kernel: Serial: 8250/16550 driver, 0 ports, IRQ sharing disabled Jan 01 00:00:04 rpi2 kernel: vc-cma: Videocore CMA driver Jan 01 00:00:04 rpi2 kernel: vc-cma: vc_cma_base = 0x00000000 Jan 01 00:00:04 rpi2 kernel: vc-cma: vc_cma_size = 0x00000000 (0 MiB) Jan 01 00:00:04 rpi2 kernel: vc-cma: vc_cma_initial = 0x00000000 (0 MiB) Jan 01 00:00:04 rpi2 kernel: vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB) Jan 01 00:00:04 rpi2 kernel: brd: module loaded Jan 01 00:00:04 rpi2 kernel: loop: module loaded Jan 01 00:00:04 rpi2 kernel: vchiq: vchiq_init_state: slot_zero = 0xbac80000, is_master = 0 Jan 01 00:00:04 rpi2 kernel: Loading iSCSI transport class v2.0-870. Jan 01 00:00:04 rpi2 kernel: usbcore: registered new interface driver smsc95xx Jan 01 00:00:04 rpi2 kernel: dwc_otg: version 3.00a 10-AUG-2012 (platform bus) Jan 01 00:00:04 rpi2 kernel: Core Release: 2.80a Jan 01 00:00:04 rpi2 kernel: Setting default values for core params Jan 01 00:00:04 rpi2 kernel: Finished setting default values for core params Jan 01 00:00:04 rpi2 kernel: Using Buffer DMA mode Jan 01 00:00:04 rpi2 kernel: Periodic Transfer Interrupt Enhancement - disabled Jan 01 00:00:04 rpi2 kernel: Multiprocessor Interrupt Enhancement - disabled Jan 01 00:00:04 rpi2 kernel: OTG VER PARAM: 0, OTG VER FLAG: 0 Jan 01 00:00:04 rpi2 kernel: Dedicated Tx FIFOs mode Jan 01 00:00:04 rpi2 kernel: WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xbac14000 dma = 0xfac14000 len=9024 Jan 01 00:00:04 rpi2 kernel: FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Jan 01 00:00:04 rpi2 kernel: dwc_otg: Microframe scheduler enabled Jan 01 00:00:04 rpi2 kernel: WARN::hcd_init_fiq:412: FIQ on core 1 at 0x80400a40 Jan 01 00:00:04 rpi2 kernel: WARN::hcd_init_fiq:413: FIQ ASM at 0x80400d9c length 36 Jan 01 00:00:04 rpi2 kernel: WARN::hcd_init_fiq:438: MPHI regs_base at 0xbb89a000 Jan 01 00:00:04 rpi2 kernel: dwc_otg bcm2708_usb: DWC OTG Controller Jan 01 00:00:04 rpi2 kernel: dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1 Jan 01 00:00:04 rpi2 kernel: dwc_otg bcm2708_usb: irq 32, io mem 0x00000000 Jan 01 00:00:04 rpi2 kernel: Init: Port Power? op_state=1 Jan 01 00:00:04 rpi2 kernel: Init: Power Port (0) Jan 01 00:00:04 rpi2 kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Jan 01 00:00:04 rpi2 kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jan 01 00:00:04 rpi2 kernel: usb usb1: Product: DWC OTG Controller Jan 01 00:00:04 rpi2 kernel: usb usb1: Manufacturer: Linux 4.1.11-v7+ dwc_otg_hcd Jan 01 00:00:04 rpi2 kernel: usb usb1: SerialNumber: bcm2708_usb Jan 01 00:00:04 rpi2 kernel: hub 1-0:1.0: USB hub found Jan 01 00:00:04 rpi2 kernel: hub 1-0:1.0: 1 port detected Jan 01 00:00:04 rpi2 kernel: dwc_otg: FIQ enabled Jan 01 00:00:04 rpi2 kernel: dwc_otg: NAK holdoff enabled Jan 01 00:00:04 rpi2 kernel: dwc_otg: FIQ split-transaction FSM enabled Jan 01 00:00:04 rpi2 kernel: Module dwc_common_port init Jan 01 00:00:04 rpi2 kernel: usbcore: registered new interface driver usb-storage Jan 01 00:00:04 rpi2 kernel: mousedev: PS/2 mouse device common for all mice Jan 01 00:00:04 rpi2 kernel: bcm2835-cpufreq: min=600000 max=700000 Jan 01 00:00:04 rpi2 kernel: sdhci: Secure Digital Host Controller Interface driver Jan 01 00:00:04 rpi2 kernel: sdhci: Copyright(c) Pierre Ossman Jan 01 00:00:04 rpi2 kernel: mmc-bcm2835 mmc-bcm2835.0: mmc_debug:0 mmc_debug2:0 Jan 01 00:00:04 rpi2 kernel: mmc-bcm2835 mmc-bcm2835.0: DMA channels allocated Jan 01 00:00:04 rpi2 kernel: sdhci-pltfm: SDHCI platform and OF driver helper Jan 01 00:00:04 rpi2 kernel: ledtrig-cpu: registered to indicate activity on CPUs Jan 01 00:00:04 rpi2 kernel: hidraw: raw HID events driver (C) Jiri Kosina Jan 01 00:00:04 rpi2 kernel: usbcore: registered new interface driver usbhid Jan 01 00:00:04 rpi2 kernel: usbhid: USB HID core driver Jan 01 00:00:04 rpi2 kernel: Initializing XFRM netlink socket Jan 01 00:00:04 rpi2 kernel: NET: Registered protocol family 17 Jan 01 00:00:04 rpi2 kernel: Indeed it is in host mode hprt0 = 00021501 Jan 01 00:00:04 rpi2 kernel: Key type dns_resolver registered Jan 01 00:00:04 rpi2 kernel: Registering SWP/SWPB emulation handler Jan 01 00:00:04 rpi2 kernel: registered taskstats version 1 Jan 01 00:00:04 rpi2 kernel: vc-sm: Videocore shared memory driver Jan 01 00:00:04 rpi2 kernel: [vc_sm_connected_init]: start Jan 01 00:00:04 rpi2 kernel: [vc_sm_connected_init]: end - returning 0 Jan 01 00:00:04 rpi2 kernel: Waiting for root device /dev/mmcblk0p3... Jan 01 00:00:04 rpi2 kernel: mmc0: host does not support reading read-only switch, assuming write-enable Jan 01 00:00:04 rpi2 kernel: mmc0: new high speed SDHC card at address 0001 Jan 01 00:00:04 rpi2 kernel: mmcblk0: mmc0:0001 00000 29.8 GiB Jan 01 00:00:04 rpi2 kernel: mmcblk0: p1 p2 p3 Jan 01 00:00:04 rpi2 kernel: usb 1-1: new high-speed USB device number 2 using dwc_otg Jan 01 00:00:04 rpi2 kernel: Indeed it is in host mode hprt0 = 00001101 Jan 01 00:00:04 rpi2 kernel: EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) Jan 01 00:00:04 rpi2 kernel: VFS: Mounted root (ext4 filesystem) on device 179:3. Jan 01 00:00:04 rpi2 kernel: devtmpfs: mounted Jan 01 00:00:04 rpi2 kernel: Freeing unused kernel memory: 416K (80774000 - 807dc000) Jan 01 00:00:04 rpi2 kernel: usb 1-1: New USB device found, idVendor=0424, idProduct=9514 Jan 01 00:00:04 rpi2 kernel: usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jan 01 00:00:04 rpi2 kernel: hub 1-1:1.0: USB hub found Jan 01 00:00:04 rpi2 kernel: hub 1-1:1.0: 5 ports detected Jan 01 00:00:04 rpi2 kernel: usb 1-1.1: new high-speed USB device number 3 using dwc_otg Jan 01 00:00:04 rpi2 kernel: NET: Registered protocol family 10 Jan 01 00:00:04 rpi2 systemd[1]: Inserted module 'ipv6' Jan 01 00:00:04 rpi2 kernel: usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 Jan 01 00:00:04 rpi2 kernel: usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jan 01 00:00:04 rpi2 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team Jan 01 00:00:04 rpi2 systemd[1]: Inserted module 'ip_tables' Jan 01 00:00:04 rpi2 kernel: smsc95xx v1.0.4 Jan 01 00:00:04 rpi2 kernel: random: systemd urandom read with 64 bits of entropy available Jan 01 00:00:04 rpi2 systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN) Jan 01 00:00:04 rpi2 systemd[1]: Detected architecture arm. Jan 01 00:00:04 rpi2 systemd[1]: Set hostname to <rpi2>. Jan 01 00:00:04 rpi2 kernel: smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:e1:49:65 Jan 01 00:00:04 rpi2 kernel: uart-pl011 dev:f1: no DMA platform data Jan 01 00:00:04 rpi2 kernel: usb 1-1.3: new low-speed USB device number 4 using dwc_otg Jan 01 00:00:04 rpi2 kernel: usb 1-1.3: New USB device found, idVendor=045e, idProduct=0040 Jan 01 00:00:04 rpi2 kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 Jan 01 00:00:04 rpi2 kernel: usb 1-1.3: Product: Microsoft 3-Button Mouse with IntelliEye(TM) Jan 01 00:00:04 rpi2 kernel: usb 1-1.3: Manufacturer: Microsoft Jan 01 00:00:04 rpi2 kernel: input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:045E:0040.0001/input/input0 Jan 01 00:00:04 rpi2 kernel: hid-generic 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-bcm2708_usb-1.3/input0 Jan 01 00:00:04 rpi2 systemd[1]: Configuration file /usr/lib/systemd/system/auditd.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway. Jan 01 00:00:04 rpi2 kernel: usb 1-1.5: new low-speed USB device number 5 using dwc_otg Jan 01 00:00:04 rpi2 systemd[1]: Configuration file /usr/lib/systemd/system/ebtables.service is marked executable. Please remove executable permission bits. Proceeding anyway. Jan 01 00:00:04 rpi2 systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. Jan 01 00:00:04 rpi2 systemd[1]: Reached target Encrypted Volumes. Jan 01 00:00:04 rpi2 systemd[1]: Starting Encrypted Volumes. Jan 01 00:00:04 rpi2 systemd[1]: Started Forward Password Requests to Wall Directory Watch. Jan 01 00:00:04 rpi2 systemd[1]: Starting Forward Password Requests to Wall Directory Watch. Jan 01 00:00:04 rpi2 kernel: usb 1-1.5: New USB device found, idVendor=413c, idProduct=2105 Jan 01 00:00:04 rpi2 kernel: usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jan 01 00:00:04 rpi2 kernel: usb 1-1.5: Product: Dell USB Keyboard Jan 01 00:00:04 rpi2 kernel: usb 1-1.5: Manufacturer: Dell Jan 01 00:00:04 rpi2 kernel: input: Dell Dell USB Keyboard as /devices/platform/bcm2708_usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:413C:2105.0002/input/input1 Jan 01 00:00:04 rpi2 systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. Jan 01 00:00:04 rpi2 systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. Jan 01 00:00:04 rpi2 kernel: hid-generic 0003:413C:2105.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-bcm2708_usb-1.5/input0 Jan 01 00:00:04 rpi2 systemd[1]: Reached target Remote File Systems. Jan 01 00:00:04 rpi2 systemd[1]: Starting Remote File Systems. Jan 01 00:00:04 rpi2 systemd[1]: Created slice Root Slice. Jan 01 00:00:04 rpi2 systemd[1]: Starting Root Slice. Jan 01 00:00:04 rpi2 systemd[1]: Listening on udev Control Socket. Jan 01 00:00:04 rpi2 systemd[1]: Starting udev Control Socket. Jan 01 00:00:04 rpi2 systemd[1]: Listening on Delayed Shutdown Socket. Jan 01 00:00:04 rpi2 systemd[1]: Starting Delayed Shutdown Socket. Jan 01 00:00:04 rpi2 systemd[1]: Created slice System Slice. Jan 01 00:00:04 rpi2 systemd[1]: Starting System Slice. Jan 01 00:00:04 rpi2 systemd[1]: Starting Collect Read-Ahead Data... Jan 01 00:00:04 rpi2 systemd[1]: Started Replay Read-Ahead Data. Jan 01 00:00:04 rpi2 systemd[1]: Created slice system-getty.slice. Jan 01 00:00:04 rpi2 systemd[1]: Starting system-getty.slice. Jan 01 00:00:04 rpi2 systemd[1]: Created slice system-serial\x2dgetty.slice. Jan 01 00:00:04 rpi2 systemd[1]: Starting system-serial\x2dgetty.slice. Jan 01 00:00:04 rpi2 systemd[1]: Created slice User and Session Slice. Jan 01 00:00:04 rpi2 systemd[1]: Starting User and Session Slice. Jan 01 00:00:04 rpi2 systemd[1]: Reached target Slices. Jan 01 00:00:04 rpi2 systemd[1]: Starting Slices. Jan 01 00:00:04 rpi2 systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. Jan 01 00:00:04 rpi2 systemd[1]: Starting /dev/initctl Compatibility Named Pipe. Jan 01 00:00:04 rpi2 systemd[1]: Listening on udev Kernel Socket. Jan 01 00:00:04 rpi2 systemd[1]: Starting udev Kernel Socket. Jan 01 00:00:04 rpi2 systemd[1]: Listening on Journal Socket. Jan 01 00:00:04 rpi2 systemd[1]: Starting Journal Socket. Jan 01 00:00:04 rpi2 systemd[1]: Mounting Debug File System... Jan 01 00:00:04 rpi2 systemd[1]: Starting Create list of required static device nodes for the current kernel... Jan 01 00:00:04 rpi2 systemd[1]: Mounted Huge Pages File System. Jan 01 00:00:04 rpi2 systemd[1]: Mounting POSIX Message Queue File System... Jan 01 00:00:04 rpi2 systemd[1]: Starting Journal Service... Jan 01 00:00:04 rpi2 systemd[1]: Mounted POSIX Message Queue File System. Jan 01 00:00:04 rpi2 systemd[1]: Mounted Debug File System. Jan 01 00:00:04 rpi2 systemd[1]: Started Collect Read-Ahead Data. Jan 01 00:00:04 rpi2 systemd[1]: Started Create list of required static device nodes for the current kernel. Jan 01 00:00:04 rpi2 systemd-journal[81]: Journal started -- Subject: The journal has been started -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel