From: Jan Glauber jglauber@cavium.com
The ThunderX SOC uses the same i2c block as the Octeon SOC. The main difference is that on ThunderX the device is a PCI device so device probing is done via PCI, interrupts are MSI-X. The clock rates can be set via device tree or ACPI.
Signed-off-by: Jan Glauber jglauber@cavium.com Signed-off-by: Wolfram Sang wsa@the-dreams.de (cherry picked from commit 22d40209de3bb50cbffcc6b79f2f7c5d689d185f) Signed-off-by: Vadim Lomovtsev Vadim.Lomovtsev@caviumnetworks.com --- drivers/i2c/busses/Kconfig | 10 ++ drivers/i2c/busses/Makefile | 2 + drivers/i2c/busses/i2c-octeon-core.h | 16 ++- drivers/i2c/busses/i2c-thunderx-pcidrv.c | 209 +++++++++++++++++++++++++++++++ 4 files changed, 234 insertions(+), 3 deletions(-) create mode 100644 drivers/i2c/busses/i2c-thunderx-pcidrv.c
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 0299dfa..19387ee 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -953,6 +953,16 @@ config I2C_OCTEON This driver can also be built as a module. If so, the module will be called i2c-octeon.
+config I2C_THUNDERX + tristate "Cavium ThunderX I2C bus support" + depends on 64BIT && PCI && (ARM64 || COMPILE_TEST) + help + Say yes if you want to support the I2C serial bus on Cavium + ThunderX SOC. + + This driver can also be built as a module. If so, the module + will be called i2c-thunderx. + config I2C_XILINX tristate "Xilinx I2C Controller" depends on HAS_IOMEM diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index f975263..29764cc 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -93,6 +93,8 @@ obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o obj-$(CONFIG_I2C_WMT) += i2c-wmt.o i2c-octeon-objs := i2c-octeon-core.o i2c-octeon-platdrv.o obj-$(CONFIG_I2C_OCTEON) += i2c-octeon.o +i2c-thunderx-objs := i2c-octeon-core.o i2c-thunderx-pcidrv.o +obj-$(CONFIG_I2C_THUNDERX) += i2c-thunderx.o obj-$(CONFIG_I2C_XILINX) += i2c-xiic.o obj-$(CONFIG_I2C_XLR) += i2c-xlr.o obj-$(CONFIG_I2C_XLP9XX) += i2c-xlp9xx.o diff --git a/drivers/i2c/busses/i2c-octeon-core.h b/drivers/i2c/busses/i2c-octeon-core.h index 81c6a81..33c7e1f 100644 --- a/drivers/i2c/busses/i2c-octeon-core.h +++ b/drivers/i2c/busses/i2c-octeon-core.h @@ -8,9 +8,15 @@ #include <linux/pci.h>
/* Register offsets */ -#define SW_TWSI 0x00 -#define TWSI_INT 0x10 -#define SW_TWSI_EXT 0x18 +#if IS_ENABLED(CONFIG_I2C_THUNDERX) + #define SW_TWSI 0x1000 + #define TWSI_INT 0x1010 + #define SW_TWSI_EXT 0x1018 +#else + #define SW_TWSI 0x00 + #define TWSI_INT 0x10 + #define SW_TWSI_EXT 0x18 +#endif
/* Controller command patterns */ #define SW_TWSI_V BIT_ULL(63) /* Valid bit */ @@ -94,6 +100,7 @@ struct octeon_i2c { wait_queue_head_t queue; struct i2c_adapter adap; + struct clk *clk; int irq; int hlc_irq; /* For cn7890 only */ u32 twsi_freq; @@ -109,6 +116,9 @@ struct octeon_i2c { void (*hlc_int_disable)(struct octeon_i2c *); atomic_t int_enable_cnt; atomic_t hlc_int_enable_cnt; +#if IS_ENABLED(CONFIG_I2C_THUNDERX) + struct msix_entry i2c_msix; +#endif };
static inline void octeon_i2c_writeq_flush(u64 val, void __iomem *addr) diff --git a/drivers/i2c/busses/i2c-thunderx-pcidrv.c b/drivers/i2c/busses/i2c-thunderx-pcidrv.c new file mode 100644 index 0000000..0dcebe2 --- /dev/null +++ b/drivers/i2c/busses/i2c-thunderx-pcidrv.c @@ -0,0 +1,209 @@ +/* + * Cavium ThunderX i2c driver. + * + * Copyright (C) 2015,2016 Cavium Inc. + * Authors: Fred Martin fmartin@caviumnetworks.com + * Jan Glauber jglauber@cavium.com + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/acpi.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> + +#include "i2c-octeon-core.h" + +#define DRV_NAME "i2c-thunderx" + +#define PCI_DEVICE_ID_THUNDER_TWSI 0xa012 + +#define SYS_FREQ_DEFAULT 700000000 + +#define TWSI_INT_ENA_W1C 0x1028 +#define TWSI_INT_ENA_W1S 0x1030 + +/* + * Enable the CORE interrupt. + * The interrupt will be asserted when there is non-STAT_IDLE state in the + * SW_TWSI_EOP_TWSI_STAT register. + */ +static void thunder_i2c_int_enable(struct octeon_i2c *i2c) +{ + octeon_i2c_writeq_flush(TWSI_INT_CORE_INT, + i2c->twsi_base + TWSI_INT_ENA_W1S); +} + +/* + * Disable the CORE interrupt. + */ +static void thunder_i2c_int_disable(struct octeon_i2c *i2c) +{ + octeon_i2c_writeq_flush(TWSI_INT_CORE_INT, + i2c->twsi_base + TWSI_INT_ENA_W1C); +} + +static void thunder_i2c_hlc_int_enable(struct octeon_i2c *i2c) +{ + octeon_i2c_writeq_flush(TWSI_INT_ST_INT | TWSI_INT_TS_INT, + i2c->twsi_base + TWSI_INT_ENA_W1S); +} + +static void thunder_i2c_hlc_int_disable(struct octeon_i2c *i2c) +{ + octeon_i2c_writeq_flush(TWSI_INT_ST_INT | TWSI_INT_TS_INT, + i2c->twsi_base + TWSI_INT_ENA_W1C); +} + +static u32 thunderx_i2c_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) | + I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_SMBUS_BLOCK_PROC_CALL; +} + +static const struct i2c_algorithm thunderx_i2c_algo = { + .master_xfer = octeon_i2c_xfer, + .functionality = thunderx_i2c_functionality, +}; + +static struct i2c_adapter thunderx_i2c_ops = { + .owner = THIS_MODULE, + .name = "ThunderX adapter", + .algo = &thunderx_i2c_algo, +}; + +static void thunder_i2c_clock_enable(struct device *dev, struct octeon_i2c *i2c) +{ + int ret; + + i2c->clk = clk_get(dev, NULL); + if (IS_ERR(i2c->clk)) { + i2c->clk = NULL; + goto skip; + } + + ret = clk_prepare_enable(i2c->clk); + if (ret) + goto skip; + i2c->sys_freq = clk_get_rate(i2c->clk); + +skip: + if (!i2c->sys_freq) + i2c->sys_freq = SYS_FREQ_DEFAULT; +} + +static void thunder_i2c_clock_disable(struct device *dev, struct clk *clk) +{ + if (!clk) + return; + clk_disable_unprepare(clk); + clk_put(clk); +} + +static int thunder_i2c_probe_pci(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct device *dev = &pdev->dev; + struct octeon_i2c *i2c; + int ret; + + i2c = devm_kzalloc(dev, sizeof(*i2c), GFP_KERNEL); + if (!i2c) + return -ENOMEM; + + i2c->dev = dev; + pci_set_drvdata(pdev, i2c); + ret = pcim_enable_device(pdev); + if (ret) + return ret; + + ret = pci_request_regions(pdev, DRV_NAME); + if (ret) + return ret; + + i2c->twsi_base = pcim_iomap(pdev, 0, pci_resource_len(pdev, 0)); + if (!i2c->twsi_base) + return -EINVAL; + + thunder_i2c_clock_enable(dev, i2c); + ret = device_property_read_u32(dev, "clock-frequency", &i2c->twsi_freq); + if (ret) + i2c->twsi_freq = 100000; + + init_waitqueue_head(&i2c->queue); + + i2c->int_enable = thunder_i2c_int_enable; + i2c->int_disable = thunder_i2c_int_disable; + i2c->hlc_int_enable = thunder_i2c_hlc_int_enable; + i2c->hlc_int_disable = thunder_i2c_hlc_int_disable; + + ret = pci_enable_msix(pdev, &i2c->i2c_msix, 1); + if (ret) + goto error; + + ret = devm_request_irq(dev, i2c->i2c_msix.vector, octeon_i2c_isr, 0, + DRV_NAME, i2c); + if (ret) + goto error; + + ret = octeon_i2c_init_lowlevel(i2c); + if (ret) + goto error; + + octeon_i2c_set_clock(i2c); + + i2c->adap = thunderx_i2c_ops; + i2c->adap.retries = 5; + i2c->adap.bus_recovery_info = &octeon_i2c_recovery_info; + i2c->adap.dev.parent = dev; + i2c->adap.dev.of_node = pdev->dev.of_node; + snprintf(i2c->adap.name, sizeof(i2c->adap.name), + "Cavium ThunderX i2c adapter at %s", dev_name(dev)); + i2c_set_adapdata(&i2c->adap, i2c); + + ret = i2c_add_adapter(&i2c->adap); + if (ret) + goto error; + + dev_info(i2c->dev, "Probed. Set system clock to %u\n", i2c->sys_freq); + return 0; + +error: + thunder_i2c_clock_disable(dev, i2c->clk); + return ret; +} + +static void thunder_i2c_remove_pci(struct pci_dev *pdev) +{ + struct octeon_i2c *i2c = pci_get_drvdata(pdev); + + thunder_i2c_clock_disable(&pdev->dev, i2c->clk); + i2c_del_adapter(&i2c->adap); +} + +static const struct pci_device_id thunder_i2c_pci_id_table[] = { + { PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVICE_ID_THUNDER_TWSI) }, + { 0, } +}; + +MODULE_DEVICE_TABLE(pci, thunder_i2c_pci_id_table); + +static struct pci_driver thunder_i2c_pci_driver = { + .name = DRV_NAME, + .id_table = thunder_i2c_pci_id_table, + .probe = thunder_i2c_probe_pci, + .remove = thunder_i2c_remove_pci, +}; + +module_pci_driver(thunder_i2c_pci_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Fred Martin fmartin@caviumnetworks.com"); +MODULE_DESCRIPTION("I2C-Bus adapter for Cavium ThunderX SOC");