On Tue, Mar 08, 2016 at 09:34:10AM +0700, Phong Vo wrote:
Sorry, that was not the right file.
Please download again
https://dl.dropboxusercontent.com/u/20403943/mp30ar0_tianocore_binaries.tar....
You should find mp30ar0_tianocore_media.img
# md5sum mp30ar0_tianocore_media.img 0bd49584eb7bedb513d0b1c545eee6ce mp30ar0_tianocore_media.img
Thanks. I can confirm that I was able to successfully and permanently flash Tianocore UEFI to the Gigabyte board using the above image.
The procedure was as outlined before, but I'm going to summarise it again so it's in one place:
(1) Download and unpack mp30ar0_tianocore_binaries.tar.xz from the link above. Verify mp30ar0_tianocore_media.img has the correct MD5 checksum.
(2) Place mp30ar0_tianocore_media.img on a TFTP server so it is available as `mp30ar0/mp30ar0_tianocore_media.img'
(3) Interrupt u-boot boot sequence, and run the following commands:
setenv ipaddr xx.xx.xx.xx # server's own IP address setenv serverip yy.yy.yy.yy # IP address of TFTP server setenv media_img mp30ar0_tianocore_media.img run spi_load # check this command succeeds run spi_update reset
Rich.