On 12/03/16 12:48, Michael Howard wrote:
On 12/03/2016 12:36, Gordan Bobic wrote:
On 12/03/16 12:04, Gordan Bobic wrote:
On 22/02/16 05:02, Phong Vo wrote:
Hi,
The mp30ar0 U-boot has some special memory mapping to accommodate 32-bit DMA. Please download the tar ball again - I've updated the tianocore UHP for this.
https://dl.dropboxusercontent.com/u/20403943/mp30ar0_tianocore_binaries.ta
r.xz
Updated instruction for U-boot chain loading: MP30AR0# setenv num_cores 1 MP30AR0# setenv DDRBASE2G 1 MP30AR0# save; reset
I just did this part and it seems to have semi-bricked the board. It gets as far as: === U-Boot 2013.04 (Jun 02 2015 - 10:54:10)ooREV: 1.15.01-F05 ( uart0 ) ===
and it just stops.
As mentioned in one of my other posts , check the vga output or serial output if you are using vga. You have actually only changed one variable, DDRBASE2G would have already been set.
I checked, and DDRBASE2G wasn't defined.
I don't suppose you managed to get "serial over LAN" working on the BMC? Getting to the actual serial console over ILO is... as unintuitive as it is undocumented...
Gordan