On 07/11/2017 12:52 AM, Ian Pilcher wrote:
Is anyone using the $SUBJECT combination?
I have a CentOS 7 (userland)/Banana Pi firewall, and I've been having an issue where dhclient fails to renew my IPv6 address. The root cause seems to be that the initial lease is obtained before the B'Pi syncs its system time, and ISC dhclient is unable to deal with large wall clock changes:
See: http://www.htt-consult.com/Centos7-armv7.html#Chrony%20caveats
for how to get services to wait until chrony is ready, and in your case to get the time syncing against driftfile before getting an address.
You have a real race condition here. You need an address to get to an NTP source, but you need accurate time before running dhcp!
So you force dhcp to wait until there is time, and since there is no address, it will use the driftfile time, then let dhcp run then get the proper time.
I think that would work, check it out on the chrony list to be sure.
Bob
(I haven't seen this problem with IPv4. It seems like there's some sort of workaround for this issue in the IPv4 case somewhere in the network scripts, chrony, or dhclient itself.)
I just tried using systemd-networkd, instead of the legacy network service, but it appears that systemd-networkd-219-30.el7.9.armv7hl will never send a "dhcp6 solicit" packet, even when "DHCP=yes" (or "DHCP=ipv6") is set in the relevant .network file.
I've verified with tcpdump that a RHEL 7 x86_64 VM *does* send a dhcp6 solicit, but there is absolutely no IPv6 UDP traffic coming from the Banana Pi.
I'm back to the legacy network service for now, with a workaround to forcibly renew the IPv6 lease once chrony has synced the time. This is my home firewall, so opportunity for messing around with the network configuration is limited.
I am wondering, though, if anyone at all is using systemd-networkd with DHCPv6 on CentOS 7 ARM?