- automotive-sig - lists.centos.org

Updates to the automotive-sig
by Liora Milbaum 16 Dec '21

16 Dec '21

Good Morning/Afternoon/Evening Everyone, Here is a quick update on the work that has been done over this week in the automotive-sig repository by the Toolchain team, The product build pipeline was created. It is now triggered automatically when changes are pushed to the main branch, after merge requests are merged. It generates a yum repository which is based on the packages manifest file <https://gitlab.com/redhat/automotive/automotive-sig/-/blob/main/package_lis…> (aka lockfile). The yum repository is stored in an AWS S3 bucket - `auto-product-build` One can download the yum repository into the development environment by invoking the following command: (AWS credentials need to be configured locally to authenticate against AWS, but do not need special permissions, this bucket is configured with a public-read ACL, open to any authenticated AWS user) aws s3 cp s3://auto-product-build/latest/cs9 <your-local-directory> --recursive Note: Once changes land in the main branch, the bucket will become temporarily unavailable as the `latest` directory is recreated with the changed packages (this will be improved in future iterations) We welcome your feedback, Liora -- Liora Milbaum She - Her - Hers Product Owner, In-Vehicle Operating System, Software Supply Chain Senior Principal Software Engineer, Always Ready RHEL Red Hat Beyond Lead Red Hat <https://www.redhat.com/> Israel lmilbaum(a)redhat.com M: 054-656-0051 <0546560051> <https://red.ht/sig>

1 0

Status update on the automotive SIG
by Pierre-Yves Chibon 03 Dec '21

03 Dec '21

Good Morning Everyone, Here is a quick update on the work that have happened this week in the automotive-sig repository. * New image In addition to the two existing image (minimal and neptune) we have introduced a new image type: osbuilder which is meant to give anyone who wants, an easy way to run osbuild and thus build their own images. You will therefore find osbuild and its dependencies pre-installed on this image, but not the automotive-sig repository. * Sample images We have created a few images based on the manifests present in the automotive-sig repository. You can find them at: https://pingou.fedorapeople.org/images/ Installing them will be a matter of de-compressing them using `unxz <filename.xz>`, then flashing them onto a SD card (beware to change `/dev/sda` to your set-up): ``` dd if=<filenamed.img> of=/dev/sda status=progress bs=4M ``` These images and this location are temporary, in the coming weeks we will be looking at automating the building of these images and make them accessible via the documentation at: https://sigs.centos.org/automotive Happy hacking, Pierre

1 0

FYI: incoherence between sig.centos and wiki.centos
by Fulup Ar Foll 01 Dec '21

01 Dec '21

1 0

Status update on the automotive work
by Pierre-Yves Chibon 26 Nov '21

26 Nov '21

Good Morning Everyone, Here is a quick update on the work that have happened this week in the automotive-sig repository. * Makefile simplifying image builds There is a new Makefile in the git repository that does all the steps involved when building images. This is much easier to use and means the docs are simpler. For example, to build an ostree based neptune image targeting the Raspberry Pi 4, all you have to do is run `make cs9-rpi4-neptune-ostree.img`. Or, if you want to build a rpm-based qemu image, instead run `make cs9-qemu-neptune-regular.qcow2`. There are all sort of other features too, check out the website and/or `make help` for more information. The documentation on how to build images has been adjusted to rely on this Makefile: https://sigs.centos.org/automotive/building/ * More stream-lined templates With the help of the OSBuild team, a number of changes have landed to the osbuild-mpp pre-processing tool that our build workflow rely upon. Thanks to this, we have been able to stream-line and merge our templates. The template for the CS9 minimal image is now just 62 lines long, while the one for the neptune is 108 lines. Using either of these template you can still generate images for x86_64, aarch64, ostree-based, non-ostree-based, direct boot or grub-based boot. The new templates are in yaml format, not json. Not only is this more readable, but it also allows us to have comments in the files. Note: Make sure you update to the very latest osbuild rpm (from copr [2]) for this to work. * New kernel A new kernel-auto package has landed in the automotive testing repository [1]. That update brings along with it improved support for the raspberry pi 4 as well as for the Nvidia Jetson boards. Note: with this kernel we are now able to build images on CS9 itself * More RT packages In order to make most of the RT features of the kernel-auto as few extra packages have been added to the automotive testing repository, namely: realtime-setup, realtime-tests and tuned with its tuned-profiles-realtime sub-package. Happy hacking, Alex & Pierre [1] The "release" repositories are currently frozen for CS9, so the SIG can only push up to the testing repository which can be found at: https://buildlogs.centos.org/9-stream/automotive/ [2] https://copr.fedorainfracloud.org/coprs/g/osbuild/osbuild/

1 0

Updates to the automotive-sig sample images
by Alexander Larsson 22 Nov '21

22 Nov '21

The last couple of weeks we have been working a lot on the sample images in the automotive sig. This culminated in a lot of changes at the end of this week that are very exciting. First of all, the manifests for these images are available (just like before) at: https://gitlab.com/redhat/automotive/automotive-sig But the recent changes are: We now have images based on CentOS Stream 9. The old CentOS Stream 8 manifests still remain, but will soon be removed in favour of the new ones. We have images targeting virtual machines and Raspberry Pi4, each supporting either OSTree or regular boot mode. There is a new build tag for automotive in CBS: https://cbs.centos.org/koji/buildtargetinfo?name=automotive9s-packages-main… This allows us to build custom packages targeting the automotive images that are not normally in centos. In this tag we now have builds of the new automotive kernel, and some other packages that are needed for the realtime support it has: https://cbs.centos.org/koji/packages?tagID=2463 These kernels and packages are automatically pulled into the automotive image builds. All the manifests have been converted from JSON to Yaml. This makes the manifest easier to read and maintain, and it also allows us to use comments in the manifests. The tool that reads the yaml is osbuild-mpp, which now supports either json or yaml, but it always outputs json files that are read by osbuild. We have been experimenting with booting the images without grub, using direct uefi kernel booting. This is done in order to boot faster and with less code. This work is experimental, but if you want to play with it, change the image_type to "directboot" to see this in action. It even works on the raspberry pi. All manifests are now ext4 based rather than xfs, as the automotive kernel is slated to remove the xfs support. The neptune images now automatically log in as the "neptune" user and start neptune. -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Alexander Larsson Red Hat, Inc alexl(a)redhat.com alexander.larsson(a)gmail.com

3 2

October meeting minutes & new meetings times proposed
by Jeffrey Osier-Mixon 06 Nov '21

06 Nov '21

The October meeting was held last Thursday. This link shows minutes as well as a link to the recording: https://wiki.centos.org/SpecialInterestGroup/Automotive/Meetings/2021-10 One of our goals for this SIG is to make the process more participatory to everyone so we can get many voices into the mix. While we are grateful for those who continue to show up and discuss things at meetings and on the mailing list, we also want to make it easier for those who haven't yet been able to participate, particularly as our meeting times have not been friendly to Asia. In addition, we held a poll to get some feedback on good meeting times - as expected, there is no single good time that suits the US, Europe and Asia. Going forward, I would like to propose the following meeting changes, in which each meeting will be held twice during the same week at alternating times: Office hours (informal) meeting: Tue Nov 2: 1600UTC (1200 EST, 1800 CEST) Tue Nov 2: 2300UTC (1900 EST, 0800 JST) Primary (formal) meeting: Tue Nov 16: 1600UTC (1200 EST, 1800 CEST) Tue Nov 16: 2300UTC (1900 EST, 0800 JST) and further alternating the day/time month by month to accommodate the poll responses: Office hours (informal) meeting: Wed Dec 1: 1600UTC (1200 EST, 1800 CEST) Wed Dec 1: 2300UTC (1900 EST, 0800 JST) Primary (formal) meeting: every 4 weeks starting Tue Nov 16 Wed Dec 15: 1600UTC (1200 EST, 1800 CEST) Wed Dec 15: 2300UTC (1900 EST, 0800 JST) According to the polls, I believe the majority of people can make it to at least one of these time slot. If you would like to participate but none of these works, please respond on this thread and we'll continue to iterate on it. thanks all Jeffrey "Jefro" Osier-Mixon | jefro(a)redhat.com Red Hat Office of the CTO | Sr. Principal Community Architect, Automotive

1 2

The automotive-SIG git repository
by Pierre-Yves Chibon 22 Oct '21

22 Oct '21

Good Morning Everyone, During the last SIG meeting we discussed where we want to host the code that the SIG is working on. At the SIG meeting today, we announced that the project has been created. It can be found at: https://gitlab.com/redhat/automotive/automotive-sig It contains osbuild-manifests allowing to build qcow2 images as well as raspberry pi 4 images. These images are based on CentOS-Stream 8 (9 being pretty high on our todo list) and use ostree. Documentation on how to manually build the images using osbuild can be found at: https://sigs.centos.org/automotive We are working on having non-ostree based images as they can be more convenient for experimentation. Finally, we have another team at Red Hat working on a CI pipeline which will trigger for every package update in CentOS-Stream and merge request to the automotive-sig project. More details on this should be coming soon :) Happy hacking! Pierre

1 0

Reminder: CentOS Auto SIG meeting tomorrow
by Jeffrey Osier-Mixon 19 Oct '21

19 Oct '21

Hi folks - just a quick reminder of tomorrow's meeting at 1500UTC (11am EDT, 5pm CEST). As usual, let me know if you'd like to be added to the calendar invitation, or if you have any agenda items to add. Tomorrow we will be going over a few business items before going into general discussion: - build & test infrastructure update - future meeting schedule (thanks to those who responded to the poll) - request for help to develop contribution guidelines Hope to see you all there Jeffrey "Jefro" Osier-Mixon | jefro(a)redhat.com Red Hat Office of the CTO | Sr. Principal Community Architect, Automotive

2 3

SIG meeting times - how should we meet?
by Jeffrey Osier-Mixon 12 Oct '21

12 Oct '21

Hi folks - I have had a few requests to change the monthly meeting time for the formal Automotive SIG meeting, and I also have a conflict with it going forward. The existing time (fourth Thursday, 1500 UTC) does not work for everyone who wants to attend. I put together a poll with a few times: https://doodle.com/poll/3th93r4p9wc8fg9r?utm_source=poll&utm_medium=link If any of these work for you, or especially if none of them work for you, please respond on this thread so we can nail down a good time. thanks all Jeffrey "Jefro" Osier-Mixon | jefro(a)redhat.com Red Hat Office of the CTO | Sr. Principal Community Architect, Automotive

1 1

Re: [Centos-automotive-sig] Proposition for Google Calendar Invite
by Andrew Tomich 01 Oct '21

01 Oct '21

Hi all, Just my 2 bits: I think a Google Calendar invite is a great idea. I don't want to miss meetings and sometimes the announcements get buried under a bunch of other emails. Regards, Andrew Tomich

2 1

2025

2024

2023

2022

2021

automotive-sig