Discuss April 2006

discuss@lists.centos.org

257 participants
318 discussions

Why?
by Robert Spangler 28 Apr '06

28 Apr '06

Hello, I haven't installed anything other then what is in the Repos. Here are my Repo's: yum.repos.d $ cat atrpms.repo [atrpms] name= ATRPMS RPM Repository for Red Hat Enterprise Linux baseurl=http://dl.atrpms.net/el$releasever-$basearch/atrpms/stable gpgcheck=1 enabled=1 yum.repos.d $ cat CentOS-Base.repo # CentOS-Base.repo # # This file uses a new mirrorlist system developed by Lance Davis for CentOS. # The mirror system uses the connecting IP address of the client and the # update status of each mirror to pick mirrors that are updated to and # geographically close to the client. You should use this for CentOS updates # unless you are manually picking other mirrors. # # If the mirrorlist= does not work for you, as a fall back you can try the # remarked out baseurl= line instead. # # [base] name=CentOS-$releasever - Base mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch… #baseurl=http://mirror.centos.org/centos/$releasever/os/$basearch/ gpgcheck=1 gpgkey=http://mirror.centos.org/centos/RPM-GPG-KEY-centos4 #released updates [update] name=CentOS-$releasever - Updates mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch… #baseurl=http://mirror.centos.org/centos/$releasever/updates/$basearch/ gpgcheck=1 gpgkey=http://mirror.centos.org/centos/RPM-GPG-KEY-centos4 #packages used/produced in the build but not released [addons] name=CentOS-$releasever - Addons mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch… #baseurl=http://mirror.centos.org/centos/$releasever/addons/$basearch/ gpgcheck=1 gpgkey=http://mirror.centos.org/centos/RPM-GPG-KEY-centos4 #additional packages that may be useful [extras] name=CentOS-$releasever - Extras mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch… #baseurl=http://mirror.centos.org/centos/$releasever/extras/$basearch/ gpgcheck=1 gpgkey=http://mirror.centos.org/centos/RPM-GPG-KEY-centos4 #additional packages that extend functionality of existing packages [centosplus] name=CentOS-$releasever - Plus mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch… #baseurl=http://mirror.centos.org/centos/$releasever/centosplus/$basearch/ gpgcheck=1 enabled=0 gpgkey=http://mirror.centos.org/centos/RPM-GPG-KEY-centos4 #contrib - packages by Centos Users [contrib] name=CentOS-$releasever - Contrib mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch… #baseurl=http://mirror.centos.org/centos/$releasever/contrib/$basearch/ gpgcheck=1 enabled=0 gpgkey=http://mirror.centos.org/centos/RPM-GPG-KEY-centos4 yum.repos.d $ cat dag.repo [dag] name=Dag RPM Repository for Red Hat Enterprise Linux baseurl=http://apt.sw.be/redhat/el$releasever/en/$basearch/dag gpgcheck=1 enabled=1 And here is what YUM has been telling me now for some time. /etc/cron.daily/yum.cron: Error: Missing Dependency: libvorbisfile.so.3 is needed by package arts Error: Missing Dependency: libraw1394.so.5 is needed by package kdebase Error: Missing Dependency: libraw1394.so.5 is needed by package pwlib Error: Missing Dependency: libsysfs.so.1 is needed by package lm_sensors Error: Missing Dependency: libFLAC.so.4 is needed by package kdemultimedia Error: Missing Dependency: libvorbisfile.so.3 is needed by package kdelibs Error: Missing Dependency: libOggFLAC.so.1 is needed by package kdemultimedia Error: Missing Dependency: libvorbisfile.so.3 is needed by package kdebase Error: Missing Dependency: libvorbisenc.so.2 is needed by package kdemultimedia Error: Missing Dependency: libvorbisenc.so.2 is needed by package kdebase Error: Missing Dependency: libvorbisenc.so.2 is needed by package kdelibs Error: Missing Dependency: libvorbisfile.so.3 is needed by package kdemultimedia Error: Missing Dependency: libvorbisenc.so.2 is needed by package arts I've done a yum search but found nothing. What am I missing besides what is listed above? Thnx -- Regards Robert Smile... it increases your face value!

4 5

postfix, cyrus-imapd and ldap limitation
by Craig White 28 Apr '06

28 Apr '06

I'm gonna remove the user name which is actually 1 character shorter than 'username' ... I have a client with a somewhat long domain name... myhomelenders.net I am using LDAP and the primary mail address is in an ldap attribute called 'mail' and that is working fine. I also use an ldap attribute called 'mailLocalAddress' for storing aliases and those have been working fine until now. using raw ldapsearch, it works fine when I... ldapsearch -x '(mailLocalAddress=username(a)myhomelenders.net)' but apparently the chop comes after 23 characters because when I send mail to the username(a)myhomelenders.net... I get an email rejection for username(a)myhomelenders.n eporting-MTA: dns; srv1.myhomelenders.net X-Postfix-Queue-ID: 4C7F8F8CD0 X-Postfix-Sender: rfc822; root(a)myhomelenders.net Arrival-Date: Thu, 27 Apr 2006 18:25:02 -0700 (MST) Final-Recipient: rfc822; username(a)myhomelenders.n Original-Recipient: rfc822; username(a)myhomelenders.net Action: failed Status: 5.0.0 Diagnostic-Code: X-Postfix; [myhomelenders.n]: Name or service not known and I get the email in 'user.et' (the balance of the name that remained from above) which was delivered by cyrus. So it seems as though the problem comes from postfix. # grep filter /etc/postfix/main.cf virtualAliases_query_filter = (|(mail=%s)(mailLocalAddress=%s)) Anybody with suggestions? Craig

1 0

automated response
by Frankie Gouge 28 Apr '06

28 Apr '06

I will be out of the office until May 1. Frankie Gouge Sent from mail.newriver.org

3 2

alsa 1.0.11 compile on 4.3
by Jerry Geis 27 Apr '06

27 Apr '06

Here is the error I get compiling alsa-drivers. sorry I did not include that in my earlier post. make[3]: Leaving directory `/usr/src/alsa-driver-1.0.11/pcmcia/vx' make[2]: Leaving directory `/usr/src/alsa-driver-1.0.11/pcmcia' make[1]: Leaving directory `/usr/src/alsa-driver-1.0.11' make -C /lib/modules/2.6.9-34.ELsmp/build SUBDIRS=/usr/src/alsa-driver-1.0.11 modules make[1]: Entering directory `/usr/src/kernels/2.6.9-34.EL-smp-x86_64' CC [M] /usr/src/alsa-driver-1.0.11/acore/hwdep.o In file included from /usr/src/alsa-driver-1.0.11/include/sound/driver.h:47, from /usr/src/alsa-driver-1.0.11/acore/hwdep.c:22: /usr/src/alsa-driver-1.0.11/include/adriver.h:219: error: conflicting types for 'gfp_t' include/linux/gfp.h:134: error: previous declaration of 'gfp_t' was here make[3]: *** [/usr/src/alsa-driver-1.0.11/acore/hwdep.o] Error 1 make[2]: *** [/usr/src/alsa-driver-1.0.11/acore] Error 2 make[1]: *** [_module_/usr/src/alsa-driver-1.0.11] Error 2 make[1]: Leaving directory `/usr/src/kernels/2.6.9-34.EL-smp-x86_64' make: *** [compile] Error 2

2 1

RE: [CentOS] smux service (port 199)
by Miskell, Craig 27 Apr '06

27 Apr '06

> -----Original Message----- > From: centos-bounces(a)centos.org > [mailto:centos-bounces@centos.org] On Behalf Of D. Ivago > Sent: Thursday, 27 April 2006 9:54 p.m. > To: centos(a)centos.org > Subject: [CentOS] smux service (port 199) > > Hi, > > when I run a nmap localhost I see that port 199 is open for > the smux service but when I check the services gui in > runlevel 3 or 5 I don't find it. It's also not in /etc/init.d/ > > At the moment almost everything is inactive except for some > well known services like httpd crond etc. but mux is still there. > > Does anyone know how to colse this service? It's part of SNMP (multiplexer for sub-agents to connect to the master agent I believ). If you are on Centos3, you're out of luck - that version of net-snmp cannot turn it off (you'll have to use iptables or the like to block it). If you're on Centos4, you can add the following line to snmpd.conf: smuxsocket 127.0.0.1 And restart snmpd. This doesn't close the port, but means that snmpd only listens to it on localhost so it is inaccessible from other hosts on the network. Nmap on "localhost" will still show it up as open, but from anywhere else on the network it won't. Craig Miskell ======================================================================= Attention: The information contained in this message and/or attachments from AgResearch Limited is intended only for the persons or entities to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipients is prohibited by AgResearch Limited. If you have received this message in error, please notify the sender immediately. =======================================================================

1 0

update from 4.2 to 4.3?
by kevin.kempter＠dataintellect.com 27 Apr '06

27 Apr '06

Hi List; Whats the preferred method to update from 4.2 to 4.3? Can I use yum to do this, If so, can someone send me the appropriate install or update command string to pass to yum? Also, Do I need to add any specific yum repositories or will the stock 4.2 yum configuration work (assumint that yum is the best way to do the upgrade) ? Thanks in advance for your help... /Kevin

2 1

CentOS/Apache Web Farm
by Todd Reed 27 Apr '06

27 Apr '06

I'm going to start this message with the CentOS list serve... I am looking into building a Web Server Farm using CentOS. Has anyone done this before? Could anyone offer some ideas I need to look at or in to? The Servers will be independent of each other and not SANS attached. That's the part that is throwing me off! I will be using some sort of load balancing, too. My ideal setup would be to have 3 servers. 2 servers in the main data center and 1 server in a remote location. The remote location would not be load balanced, but the data would need to be replicated. Could anyone offer any advice or suggestions on how to pull this off? I've spent the past 3 days looking. I've found different ideas, but each have their uniqueness! What are some actual real-case scenarios? Thanks, Todd

1 0

problem with "yum install libXmu.so.6"
by Nat Gross 27 Apr '06

27 Apr '06

Hi; Please advise how to proceed with the following error encountered when yum install libXmu.so.6. (64 bit Intel dual core, centos 4.3). ==================== #yum install libXmu.so.6 Setting up Install Process Setting up repositories Reading repository metadata in from local files Parsing package install arguments Resolving Dependencies --> Populating transaction set with selected packages. Please wait. ---> Package xorg-x11-libs.i386 0:6.8.2-1.EL.13.25 set to be updated --> Running transaction check --> Processing Dependency: libGL.so.1 for package: xorg-x11-libs --> Processing Dependency: libexpat.so.0 for package: xorg-x11-libs --> Processing Dependency: libz.so.1 for package: xorg-x11-libs --> Processing Dependency: libfontconfig.so.1 for package: xorg-x11-libs --> Processing Dependency: libfreetype.so.6 for package: xorg-x11-libs --> Restarting Dependency Resolution with new changes. --> Populating transaction set with selected packages. Please wait. ---> Package expat.i386 0:1.95.7-4 set to be updated ---> Package xorg-x11-Mesa-libGL.i386 0:6.8.2-1.EL.13.25 set to be updated ---> Package freetype.i386 0:2.1.9-1 set to be updated ---> Package zlib.i386 0:1.2.1.2-1.2 set to be updated ---> Package fontconfig.i386 0:2.2.3-7 set to be updated --> Running transaction check Dependencies Resolved ============================================================================= Package Arch Version Repository Size ============================================================================= Installing: xorg-x11-libs i386 6.8.2-1.EL.13.25 base 2.7 M Installing for dependencies: expat i386 1.95.7-4 base 69 k fontconfig i386 2.2.3-7 base 116 k freetype i386 2.1.9-1 base 756 k xorg-x11-Mesa-libGL i386 6.8.2-1.EL.13.25 base 375 k zlib i386 1.2.1.2-1.2 base 44 k Transaction Summary ============================================================================= Install 6 Package(s) Update 0 Package(s) Remove 0 Package(s) Total download size: 4.0 M Is this ok [y/N]: y Downloading Packages: Running Transaction Test Finished Transaction Test Transaction Check Error: file /usr/share/man/man5/fonts-conf.5.gz from install of fontconfig-2.2.3-7 conflicts with file from package fontconfig-2.2.3-7 # ==================== Thanks nat

6 21

How to find your IP Address
by Chris Peikert 27 Apr '06

27 Apr '06

Ok guys a quick newb question. I have been reading up on the Red Hat Enterprise 4 for dummies book along with installing and playing with the configurations of Cent OS 4. I have yet been able to find any information on how to find out what your IP address is. I have it set to use DHCP from our Windows server and I looked under the network card configuration settings but can not find any command or GUI place that will show your IP Address. When I go to a windows machine and try to ping the Cent box by its name it cant find the host. Now I know I can go into the DHCP server but I need to learn how to find it on the Linux box. Another question has to deal with Samba. I set up samba using the GUI interface then ran service smb start command to start up samba. The book says I should be able to browse the network with a windows machine now and find the linux box but I am unable to. Any clues why its not showing up on the network?

4 6

RAID question
by Miguel 27 Apr '06

27 Apr '06

Hello. I have several systems (CentOS 3 and CentOS 4) with software raid and I've observed a difference in the raid state: In CentOS 3 systems we find that mdadm --detail /dev/md* show: .............. Version : 00.90.00 Creation Time : Fri Apr 16 14:59:43 2004 Raid Level : raid1 Array Size : 20289984 (19.35 GiB 20.78 GB) Device Size : 20289984 (19.35 GiB 20.78 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 5 Persistence : Superblock is persistent Update Time : Thu Apr 20 15:52:50 2006 State : dirty, no-errors <--------------------------------------------------- RAID STATE Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Number Major Minor RaidDevice State 0 33 7 0 active sync /dev/hde7 1 34 7 1 active sync /dev/hdg7 UUID : 232294aa:45bd9dea:c62face1:2fbf7a60 Events : 0.38 .......................................... while in CentOS 3 systems we find: .................. Version : 00.90.01 Creation Time : Wed Feb 15 10:13:41 2006 Raid Level : raid1 Array Size : 76051584 (72.53 GiB 77.88 GB) Device Size : 76051584 (72.53 GiB 77.88 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Sun Apr 23 12:48:42 2006 State : clean <------------------------------------------------------- RAID STATE Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 8 17 1 active sync /dev/sdb1 UUID : 35c88d0d:0a9b5ba5:78a32da7:5d5cb1ec Events : 0.251478 .................. Which is the difference between dirty and clean state? Both systems work fine.

1 0

← Newer
1
2
3
4
5
6
7
8
...
32
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss April 2006