Discuss January 2008

discuss@lists.centos.org

311 participants
383 discussions

vlc
by jarmo 24 Jan '08

24 Jan '08

Anyone else got this, vlc do not start...? Here's the output.. VLC media player 0.8.6d Janus The program '.' received an X Window System error. This probably reflects a bug in the program. The error was 'BadAlloc (insufficient resources for operation)'. (Details: serial 280 error_code 11 request_code 146 minor_code 5) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the --sync command line option to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.) Jarmo

1 0

Dell 2950 and broadcom
by Martin 24 Jan '08

24 Jan '08

Hi all I'm trying to setup second ethernet on Dell 2950 server but there isn't any eth1 device (in the bios are ON) # dmesg |grep eth eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 169, node addr 001c23d878bb eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 169, node addr 001c23d878bd bnx2: eth0: using MSI bnx2: eth0 NIC Link is Up, 100 Mbps full duplex # uname -a Linux vmta2.contactlab.it 2.6.18-53.1.6.el5 #1 SMP Wed Jan 23 11:28:47 EST 2008 x86_64 x86_64 x86_64 GNU/Linux # ifconfig -a dev707 Link encap:Ethernet HWaddr 00:1C:23:D8:78:BD BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:169 Memory:f4000000-f4012100 eth0 Link encap:Ethernet HWaddr 00:1C:23:D8:78:BB inet addr:xxxxxxxxxx Bcast:xxxxxxxxx Mask:255.255.255.0 inet6 addr: fe80::21c:23ff:fed8:78bb/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:119649 errors:0 dropped:0 overruns:0 frame:0 TX packets:43871 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:91428814 (87.1 MiB) TX bytes:5879945 (5.6 MiB) Interrupt:169 Memory:f8000000-f8012100 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:14 errors:0 dropped:0 overruns:0 frame:0 TX packets:14 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:848 (848.0 b) TX bytes:848 (848.0 b) # ls -la /sys/class/net/ total 0 drwxr-xr-x 6 root root 0 Jan 24 10:39 . drwxr-xr-x 30 root root 0 Jan 24 10:39 .. drwxr-xr-x 3 root root 0 Jan 24 10:57 dev707 drwxr-xr-x 3 root root 0 Jan 24 10:40 eth0 drwxr-xr-x 3 root root 0 Jan 24 10:40 lo drwxr-xr-x 3 root root 0 Jan 24 10:40 sit0 # lsmod |grep bnx bnx2 190425 0 # cat /etc/modprobe.conf alias eth0 bnx2 alias eth1 bnx2 alias scsi_hostadapter megaraid_sas alias scsi_hostadapter1 ata_piix How can I do to setup eth1 device? kind regards

2 2

openldap 2.4.x - CentOS 4
by Tom Brown 24 Jan '08

24 Jan '08

Hi Is there an rpm pf openldap 2.4.something for CentOS 4 around ? We have 2.3 but there is a bug we are hitting that is meant to be fixed in 2.4 Any pointers appreciated thanks

1 0

cdrom_pc_intr: The drive appears confused
by Olaf Mueller 24 Jan '08

24 Jan '08

Hello, this morning my centos 5 server (2.6.18-53.1.4.el5) failed on the dvd device and disabled dma. The dvd-writer (/dev/hdg) is connected to the following controller as a secondary master. 02:07.0 RAID bus controller: Silicon Image, Inc. PCI0680 Ultra ATA-133 Host Controller (rev 02) There is also an harddisc as primary master connected on this controller. This harddisc is the only device in the system that I put to sleep with 'hdparm -S180 /dev/hde'. The error messages are: Jan 24 04:54:21 weidenwinde kernel: hdg: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. Jan 24 04:59:38 weidenwinde kernel: hdg: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. Jan 24 05:03:43 weidenwinde kernel: hdg: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. Jan 24 05:11:34 weidenwinde kernel: hdg: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. Jan 24 05:19:24 weidenwinde kernel: hdg: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. Jan 24 05:20:06 weidenwinde kernel: hdg: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. Jan 24 05:20:06 weidenwinde kernel: hdg: status error: status=0x58 { DriveReady SeekComplete DataRequest } Jan 24 05:20:06 weidenwinde kernel: ide: failed opcode was: unknown Jan 24 05:20:06 weidenwinde kernel: hdg: drive not ready for command Jan 24 05:20:06 weidenwinde kernel: hdg: status timeout: status=0xd0 { Busy } Jan 24 05:20:06 weidenwinde kernel: ide: failed opcode was: unknown Jan 24 05:20:06 weidenwinde kernel: hdg: DMA disabled Jan 24 05:20:06 weidenwinde kernel: hdg: ATAPI reset complete Jan 24 05:30:13 weidenwinde kernel: hdg: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. Could this error caused by the hdparm sleep command for /dev/hde? regards Olaf

1 0

CentOS 5.0 64bit - can't using ipt_connlimit module
by Ocon 8866 24 Jan '08

24 Jan '08

# iptables -m connlimit --help ......... connlimit v1.3.5 options: [!] --connlimit-above n match if the number of existing tcp connections is (not) above n --connlimit-mask n group hosts using mask ----------------------------------------- The library seems to exist also: /lib64/iptables/libipt_connlimit.so However, creating a rule that uses connlimit fails: #$IPTABLES -A tcp_traffic_in -p tcp --dport 80 -m connlimit --connlimit-above 2 -j DROP iptables: Unknown error 4294967295 So, am I missing something? Or am I limited to using netfilter's patch-o-matic and compiling a custom kernel (that I **really* do not* want to do)? Thank you so much Hoang Phong Viet Nam

1 0

CentOS-announce Digest, Vol 35, Issue 15
by centos-announce-request＠centos.org 24 Jan '08

24 Jan '08

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2008:0059 Moderate CentOS 3 ia64 wireshark - security update (Pasi Pirhonen) 2. CESA-2008:0058 Moderate CentOS 4 ia64 wireshark - security update (Pasi Pirhonen) 3. CESA-2008:0089 Important CentOS 5 i386 kernel Update (Karanbir Singh) 4. CESA-2008:0089 Important CentOS 5 x86_64 kernel Update (Karanbir Singh) 5. CESA-2008:0029 Important CentOS 3 ia64 XFree86 - security update (Pasi Pirhonen) 6. CESA-2008:0059 Moderate CentOS 3 s390(x) wireshark - security update (Pasi Pirhonen) 7. CESA-2008:0030 Important CentOS 4 ia64 xorg-x11 - security update (Pasi Pirhonen) 8. CESA-2008:0058 Moderate CentOS 4 s390(x) wireshark - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Wed, 23 Jan 2008 21:17:30 +0200 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2008:0059 Moderate CentOS 3 ia64 wireshark - security update To: centos-announce(a)centos.org Message-ID: <20080123191730.GA5043(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2008:0059 https://rhn.redhat.com/errata/RHSA-2008-0059.html The following updated files have been uploaded and are currently syncing to the mirrors: ia64: updates/ia64/RPMS/libsmi-0.4.5-3.el3.ia64.rpm updates/ia64/RPMS/libsmi-devel-0.4.5-3.el3.ia64.rpm updates/ia64/RPMS/wireshark-0.99.7-EL3.1.ia64.rpm updates/ia64/RPMS/wireshark-gnome-0.99.7-EL3.1.ia64.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

Recommend a mini or nano ITX system for Centos
by Robert Moskowitz 24 Jan '08

24 Jan '08

I am looking into convising the boss to get me a mini-itx system to replace my workhorse notebook (I have to have a corp notebook and I can remote terminal into a Centos server from it). So I have been playing with one mini-itx system (the decTOP) and am looking at my options. I want a fast processor, 1Gb memory, LAN, 4USB, VGA. Wireless and bluetooth optional USB dongles along with a second LAN interface). PCI slot optional (for said wireless, bluetooth or LAN!). Smallest footprint and power draw are the other key factors. As well as being able to run Centos and maybe also being able to go into memory or swap suspend! External power supply so I can use an alternate battery powerpak on the road. It would be soooo neat if I could put it in a pocket! The nano-itx boards almost make that possible. For a drive I would be using either a 8gb CF micro harddrive or perhaps an ipod drive with an IDE interface (something I have to learn more about). So what do you know about nano and mini ITX compatiblity to Centos. And complete systems?

3 4

Why iptables are not working?
by Tolun ARDAHANLI 24 Jan '08

24 Jan '08

Hi; in our server we dont have "iptables" command! and i am trying to install it with that yum -y install iptables after this command it says that "...nothings to do". Do you have any suggestion for installing the iptables? thanks a lot.... Note: CENTos 5.1 is istalled... -- Tolun ARDAHANLI Bilgisayar Muhendisi E-posta:tolun.ardahanli@linux.org.tr Icq:326600 ---------------------------------------------------------------------------- Tolun ARDAHANLI Computer Engineer E-mail:tolun.ardahanli@linux.org.tr Icq:326600

6 7

crontab - corrected version
by Scott Ehrlich 24 Jan '08

24 Jan '08

So I want to see if there is a way to restrict crontab from running an executable or anything else from a world-writable directory, or subdirectory thereof. Thanks. Scott

3 2

Amanda oddity (amcheck)
by David G. Miller 23 Jan '08

23 Jan '08

I'm slowly getting everything back to normal here after swapping motherboards on my server. I also took the opportunity to bring the server up to CentOS 5. I'm still getting services working but I have one oddity with amanda. Ever since I upgraded the server to CentOS 5, amcheck dies and gives me a backtrace if there are no available tapes. amcheck works fine if the expected next tape is in my tape changer. If it's time to change tapes, I get: *** glibc detected *** /usr/sbin/amcheck: double free or corruption (fasttop): 0x09fb1a28 *** ======= Backtrace: ========= /lib/libc.so.6[0x9e1aa6] /lib/libc.so.6(cfree+0x90)[0x9e4fc0] /usr/sbin/amcheck[0x820e03] /usr/sbin/amcheck(main+0xc2d)[0x82291d] /lib/libc.so.6(__libc_start_main+0xdc)[0x990dec] /usr/sbin/amcheck[0x81da01] ======= Memory map: ======== 00110000-00135000 r-xp 00000000 09:02 2378087 /lib/libm-2.5.so 00135000-00136000 r-xp 00024000 09:02 2378087 /lib/libm-2.5.so 00136000-00137000 rwxp 00025000 09:02 2378087 /lib/libm-2.5.so 00137000-00140000 r-xp 00000000 09:02 2378088 /lib/libnss_files-2.5.so 00140000-00141000 r-xp 00008000 09:02 2378088 /lib/libnss_files-2.5.so 00141000-00142000 rwxp 00009000 09:02 2378088 /lib/libnss_files-2.5.so 002cd000-002d8000 r-xp 00000000 09:02 2378249 /lib/libgcc_s-4.1.2-20070626.so.1 002d8000-002d9000 rwxp 0000a000 09:02 2378249 /lib/libgcc_s-4.1.2-20070626.so.1 0046b000-0047a000 r-xp 00000000 09:02 2378128 /lib/libresolv-2.5.so 0047a000-0047b000 r-xp 0000e000 09:02 2378128 /lib/libresolv-2.5.so 0047b000-0047c000 rwxp 0000f000 09:02 2378128 /lib/libresolv-2.5.so 0047c000-0047e000 rwxp 0047c000 00:00 0 006ab000-006be000 r-xp 00000000 09:02 2378125 /lib/libnsl-2.5.so 006be000-006bf000 r-xp 00012000 09:02 2378125 /lib/libnsl-2.5.so 006bf000-006c0000 rwxp 00013000 09:02 2378125 /lib/libnsl-2.5.so 006c0000-006c2000 rwxp 006c0000 00:00 0 0081c000-00825000 r-xp 00000000 09:02 4560646 /usr/sbin/amcheck 00825000-00826000 rwxp 00008000 09:02 4560646 /usr/sbin/amcheck 008eb000-00904000 r-xp 00000000 09:02 2378079 /lib/ld-2.5.so 00904000-00905000 r-xp 00019000 09:02 2378079 /lib/ld-2.5.so 00905000-00906000 rwxp 0001a000 09:02 2378079 /lib/ld-2.5.so 0093a000-0093b000 r-xp 0093a000 00:00 0 [vdso] 0097b000-00ab5000 r-xp 00000000 09:02 2378081 /lib/libc-2.5.so 00ab5000-00ab7000 r-xp 0013a000 09:02 2378081 /lib/libc-2.5.so 00ab7000-00ab8000 rwxp 0013c000 09:02 2378081 /lib/libc-2.5.so 00ab8000-00abb000 rwxp 00ab8000 00:00 0 00ae7000-00aea000 r-xp 00000000 09:02 2378258 /lib/libtermcap.so.2.0.8 00aea000-00aeb000 rwxp 00002000 09:02 2378258 /lib/libtermcap.so.2.0.8 00dfb000-00e1b000 r-xp 00000000 09:02 4953736 /usr/lib/libamserver-2.5.0p2.so 00e1b000-00e1d000 rwxp 0001f000 09:02 4953736 /usr/lib/libamserver-2.5.0p2.so 00e1d000-00e1f000 rwxp 00e1d000 00:00 0 00ed0000-00eda000 r-xp 00000000 09:02 4674895 /usr/lib/libamtape-2.5.0p2.so 00eda000-00edb000 rwxp 00009000 09:02 4674895 /usr/lib/libamtape-2.5.0p2.so 00f9c000-00fbd000 r-xp 00000000 09:02 4675888 /usr/lib/libamanda-2.5.0p2.so 00fbd000-00fbe000 rwxp 00021000 09:02 4675888 /usr/lib/libamanda-2.5.0p2.so 00fbe000-00fdd000 rwxp 00fbe000 00:00 0 09fab000-09fcc000 rw-p 09fab000 00:00 0 b7e00000-b7e21000 rw-p b7e00000 00:00 0 b7e21000-b7f00000 ---p b7e21000 00:00 0 b7f86000-b7f89000 rw-p b7f86000 00:00 0 b7f92000-b7f94000 rw-p b7f92000 00:00 0 bfa86000-bfa9b000 rw-p bfa86000 00:00 0 [stack] Amanda Tape Server Host Check ----------------------------- Holding disk /share2/stage: 120193720 kB disk space available, using 120091320 kB Nothing jumps out at me when I Google for the error. Tape drive and changer are: [root@fraud etc]# cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 04 Lun: 00 Vendor: HP Model: C1557A Rev: U709 Type: Sequential-Access ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 04 Lun: 01 Vendor: HP Model: C1557A Rev: U709 Type: Medium Changer ANSI SCSI revision: 02 Everything appears to work correctly otherwise (tape changer changes tapes, backups get done, etc.). Just amcheck and only when the next tape isn't in the changer is a problem. Cheers, Dave -- Politics, n. Strife of interests masquerading as a contest of principles. -- Ambrose Bierce

1 0

← Newer
1
...
9
10
11
12
13
14
15
...
39
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss January 2008