Discuss March 2012

discuss@lists.centos.org

217 participants
198 discussions

A problem with power outages
by Timothy Murphy 26 Mar '12

26 Mar '12

I have a CentOS-6.2 server in Italy. Every few months the server gets into a strange state and stops working after a power outage. I should say that this does not occur after every power outage; I suspect, but have no real evidence for this, that if the power comes back too quickly then the machine gets confused because it is in the middle of closing down. If I am in Italy the solution is simple; I just press the power button on the machine until it stops and then switch it on again, and everything works fine. I guess that the proper solution is to get a UPS. PowerTrust (or Trust) UPS's are available at a reasonable price (€40-€50). But I have one question about this solution. What if the outage lasts longer than the "life" of the UPS, about 10 minutes? I'd actually like the UPS simply to halt the machine in the proper way after say 1 minute; but can this be arranged? (If the machine knew it had gone onto UPS, this could be arranged fairly simply.) There is one other possibility. There is a Billion modem/router between the ADSL input and the computer. This does not seem to have any problem with power outages. So if it were possible to send a message to the router which would cause the computer to be turned off and on again, that might offer an alternative solution. One problem with this is that the Italian ISP only offers a dynamic IP address. I run ddclient with dyndns on the server to translate this into a fixed domain-name. But this means that any action of this kind would have to be taken before the IP address changes. I think it usually stays the same for several days, but I guess this might not be true if there is an outage at the ISP's site, during a big electric storm. Any suggestions, advice or experience of this problem gratefully received. -- Timothy Murphy e-mail: gayleard /at/ eircom.net tel: +353-86-2336090, +353-1-2842366 s-mail: School of Mathematics, Trinity College Dublin

7 13

command problem
by Paolo De Michele 26 Mar '12

26 Mar '12

Hi all, I am having problems with commands via Terminal after the upgrade to centos to release 5.8 How come I did not recognized the ifconfig, route? below is an excerpt: # ifconfig bash: ifconfig: command not found # route bash: route: command not found the kernel version: # uname -a Linux localhost.localdomain 2.6.18-308.1.1.el5 #1 SMP Wed Mar 7 04:17:30 EST 2012 i686 i686 i386 GNU/Linux before the update I had the release 5.5 and I had no problem can someone help me? thanks in advance regards

2 2

Reason for high load on CentOS
by Kaushal Shriyan 26 Mar '12

26 Mar '12

Hi, Are there tools or utilities to understand about the reason behind high load on CentOS Linux. Please help me understand with examples. Regards, Kaushal

6 7

keyboard and mouse not working on vnc when vmware tools installed
by Janez Kosmrlj 26 Mar '12

26 Mar '12

I had some trouble with centos 6 installed on ESXi 5. Vnc didn't work properly until i removed the file /etc/xdg/autostart/vmware-user.desktop. I found the solution in this thread on vmware forums: http://communities.vmware.com/thread/326868 The same solution applies to xrdp since it uses vnc. Maybe this helps someone find the solution faster.

1 0

postgrey, postfix, tld list
by Bob Hoffman 25 Mar '12

25 Mar '12

Hello all, I am looking for the correct way to add postgrey to my system but whitelist everything except for com, org, and net domains. Most of my spam is from .info domains. There seems to be no way to only go after certain domains, instead postgrey wants to go after everything except what you whitelist. So my idea was to whitelist .com, .net, .org, .gov, and a few others while greylisting the rest. The syntax for the files want fqdn, email addresses, or domain names. But How do you just add a .TLD? postgrey_whitelist_clients ?? *.com *.net *.org ?? this sound right?

3 5

CentOS for ARM
by Gordan Bobic 25 Mar '12

25 Mar '12

Hi guys, I recently became aware that this is being worked on as of recently. A similar thing already exists, though. Those interested in an ARM port may also be interested in taking a look at RedSleeve Linux, which is an ARM port of the same upstream distribution as CentOS. You can look here for more info: http://www.redsleeve.org/about/ http://www.redsleeve.org/ In total 109 SRPMs had to be modified in order to get them to build and work on ARM. They are in SRPMS/changed directory on the RedSleeve mirror. (Note: About 5 of those 109 were changed in order to remove the upstream branding which isn't relevant to the CentOS effort as it is already taken care of. It is quite well known what those are.) I hope this is of interest to the CentOS ARM port efforts. Or, you could take RedSleeve for a spin, since that is already available. :) Gordan

1 0

build postfix rpm with mysql
by Tim Dunphy 25 Mar '12

25 Mar '12

hello list, I'm trying to build a postfix rpm that has mysql support included. I've found the line where I need to define mysql support but it seems that I am being tripped up by some build dependencies: [root@beta SPECS]# rpmbuild -ba postfix.spec error: Failed build dependencies: MySQL-shared is needed by postfix-2.9.1-1.rhel5.x86_64 MySQL-devel is needed by postfix-2.9.1-1.rhel5.x86_64 This is the line I've enabled in the space file in order to include mysql support %define with_mysql 1 and this is the line in the spec that seems to pertain to the error: %if %{with_mysql} Requires: MySQL-shared BuildRequires: MySQL-shared, MySQL-devel %endif What I'm wondering is if I comment out the lines that require MySQL-shared and MySQL-devel will I end up with a usable install of postfix with MySQL support? Here is the spec file that I am trying to use: ============= # W A R N I N G -- DO NOT EDIT THIS FILE -- W A R N I N G # # postfix.spec # # This file was generated automatically from /home/sjmudd/RPM/SRC/postfix/postfix.spec.in. # If you want to build postfix with other options see make-postfix.spec in # the same directory for instructions. # -- # Note: For complete source info for building these rpms see: # https://github.com/sjmudd/postfix-rpm # # File used to generate the distribution-specific postfix.spec file. # If you need to make changes to postfix.spec, make them to postfix.spec.in # and regenerate the spec file. # # See make-postfix.spec in %{_sourcedir} for more information. # # This spec file was built on distribution: rhel-5.0 # # Information imported from postfix.spec.in: DO NOT CHANGE IT BY HAND # # mysql_paths - paths where locally installed MySQL resides (or 0) # - if using this option mysql_paths should be as # follows: </pathto/mysql/include>:</pathto/mysql/lib> # e.g.: /usr/mysql/include:/usr/mysql/lib # - The order is important and only 2 directories may # be given. # requires_db - used to add dbX dependencies in the package # smtpd_multiline_greeting - my patch to allow multiline banner # mps - man page suffix, .gz except Mandrake >= 8 which uses .bz2 # with_cdb - include CDB support by Michael Tokarev # <mjt(a)corpit.ru> # with_dovecot - include DOVECOT SASL authentication # with_ldap - include LDAP support # with_mysql - include support for www.mysql.com's MySQL rpms # with_mysql_redhat - include support for RedHat's MySQL rpms # with_pcre - include pcre support # with_pgsql - include Postgres database support # with_sasl - include Cyrus SASL/AUTH support (0 to disable sasl, # 1 for sasl v1, or 2 for sasl v2, sasl_library is # the sasl library to link against, distribution dependent) # with_spf - include libspf2 library support (EXPERIMENTAL) # - rpms for libspf can be found at http://www.sosdg.org/rpm/libspf/ # with_tls - include TLS support # with_tlsfix - include TLS fix # - needed for rh6.2, rh9 and rhel3 # with_vda - add virtual delivery agent patch # # Please send bugfixes and comments to the packager. # # distribution which the spec file was built from %define distribution rhel-5.0 # distribution which we are building Postfix on # - call my script once to speed up build process %define distro_info %(sh $(rpm --eval '%{_sourcedir}')/postfix-get-distribution --distro-info) %define build_dist_full %(echo "%distro_info" | cut -d" " -f5) %define build_name %(echo "%distro_info" | cut -d" " -f1) %define build_major %(echo "%distro_info" | cut -d" " -f3) %define build_minor %(echo "%distro_info" | cut -d" " -f4) %define build_dist %{build_name}-%{build_major}.%{build_minor} %define mps %(test "%{build_name}" = mandrake -a "%{build_major}" -ge 8 && echo .bz2 || echo .gz) %define mysql_paths 0 %define mysql_local %(test "%{mysql_paths}" != 0 && echo 1 || echo 0) %define mysql_include %(echo "%{mysql_paths}" | cut -d: -f1) %define mysql_lib %(echo "%{mysql_paths}" | cut -d: -f2) # determine PCRE library based on distribution name %define pcre_requires %(test %{build_dist} = mandrake && echo libpcre0 || echo pcre) # determine SASL library based on distribution name %define sasl_library %(test %{build_dist} = mandrake && echo libsasl-devel || echo cyrus-sasl-devel) %define requires_db 4 %define requires_zlib 1 %define smtpd_multiline_greeting 1 # alternatives priority can now be changed in one place. # - this used to be 30 but RH seems to have defined other higher values # and some users need another value. # Don't change this unless you really think you need to. %define with_alt_prio 30 %define with_cdb 0 %define with_ldap 0 %define with_mysql 1 %define with_mysql_redhat 1 %define with_pcre 0 %define with_pgsql 0 %define with_sasl 0 %define with_spf 0 %define with_dovecot 0 %define with_tls 1 %define with_tlsfix 2 %define with_vda 1 # support the conditional builds via rpm's --with debug %define debug %{?_with_debug:1}%{?!_with_debug:0} # patch and version information %define V_vda 2.5.4 %define V_cdb 1.1.11-20021104 %define V_postfinger 1.30 # If set to 1 if official version, 0 if snapshot %define official 1 %define V_postfix 2.9.1 %define rel 1.rhel5 %if %{official} %define V_tarball %{V_postfix} %define ftp_dir official %else %define V_release_date RC2 %define V_tarball %{V_postfix}-%{V_release_date} %define ftp_dir experimental %endif # rpm does not accept '-' in version strings so replace them with a '.' # - (only affects snapshots) %define V_package %(echo %{V_tarball} | sed 's/-/./g') # rpm-workaround: # # We can NOT use %{_docdir}/%{name}-%{version} for installing the docs # from the 'install' section as RPM kindly removes this directory after # we have installed files to it. (standard part of 'doc' processing!) # #define docdir %{_docdir}/%{name}-%{version} %define docdir %{_docdir}/%{name}-%{V_package}-documentation %define readme_dir %{docdir}/README_FILES %define html_dir %{docdir}/html %define examples_dir %{docdir}/examples %define newaliases_path %{_bindir}/newaliases.postfix %define mailq_path %{_bindir}/mailq.postfix %define rmail_path %{_bindir}/rmail.postfix %define sendmail_path %{_sbindir}/sendmail.postfix # Don't use %{_libdir} as it gives the wrong directory on x86_64 servers %define usrlib_sendmail /usr/lib/sendmail.postfix %define initdir /etc/rc.d/init.d %define whinge /usr/bin/logger -p mail.info -t postfix/rpm %define die_cmd die(){ %whinge "$*"; exit 1; } Name: postfix Group: System Environment/Daemons URL: http://www.postfix.org License: IBM Public License PreReq: chkconfig, initscripts, shadow-utils PreReq: /etc/init.d, /sbin/service, chkconfig >= 1.3 Epoch: 2 Provides: MTA smtpd smtpdaemon Provides: %{_sbindir}/sendmail %{_bindir}/mailq %{_bindir}/newaliases %{_bindir}/rmail Provides: %{_mandir}/man1/newaliases.1.%{mps} %{_mandir}/man5/newaliases.5.%{mps} Version: %{V_package} Release: %{rel} Packager: Simon J Mudd <sjmudd(a)pobox.com> Summary: Postfix Mail Transport Agent Vendor: Built on %{build_dist_full} (%{build_dist}) Source0: ftp://ftp.porcupine.org/mirrors/postfix-release/%{ftp_dir}/postfix-%{V_tarb… Source1: make-postfix.rpm Source2: postfix-get-distribution Source3: postfix-etc-init.d-postfix Source4: postfix-chroot.sh Source5: postfix-aliases Source7: postfix.spec.in Source8: make-postfix.spec Source10: README-Postfix-SASL-RedHat.txt Source12: ftp://ftp.corpit.ru/pub/postfix/postfix-dict_cdb-%{V_cdb}.tar.gz Source16: http://postfix.wl0.org/ftp/postfinger/postfinger-%{V_postfinger} # Sources >= 100 are config files Source100: postfix-sasl.conf Source101: postfix-pam.conf Source102: postfix-saslauthd.conf # Obligatory Patches Patch0: postfix-2.3.3-vda.patch Patch3: postfix-files.patch Patch5: postfix-makedefs.patch # Optional patches # FIXME: There is also a 64-bit patch (not included) for 2.5.4 Patch4: http://vda.sourceforge.net/VDA/postfix-%{V_vda}-vda-ng.patch.gz # SPF patch Patch8: http://www.linuxrulz.org/nkukard/postfix/postfix-2.3/postfix-2.3.2_libspf2-… Patch99: ftp://ftp.wl0.org/SOURCES/postfix-2.8.3-multiline-greeting.patch BuildRoot: %{_tmppath}/%{name}-%{V_package}-buildroot # Determine packaging requirements BuildRequires: /usr/bin/cc, gawk, sed, ed, patch, rpm >= 4 Requires: gawk, sed, ed %if %{with_spf} BuildRequires: libspf2-devel >= 1.2.5 Requires: libspf2 >= 1.2.5 %endif %if %{requires_db} Requires: db%{requires_db} BuildRequires: db%{requires_db}-devel %endif %if %{with_cdb} Requires: tinycdb BuildRequires: tinycdb %endif %if %{with_ldap} Requires: openldap >= 1.2.9 BuildRequires: openldap-devel >= 1.2.9 %endif %if %{with_pcre} Requires: %{pcre_requires} BuildRequires: %{pcre_requires}, %{pcre_requires}-devel %endif # Needed by some Mysql and some TLS packages %if %{requires_zlib} Requires: zlib BuildRequires: zlib-devel %endif %if %{with_mysql_redhat} Requires: mysql BuildRequires: mysql, mysql-devel %endif %if %{mysql_local} BuildRequires: %{mysql_include}/mysql.h Requires: %{mysql_lib}/libmysqlclient.so %endif %if %{with_mysql} Requires: MySQL-shared BuildRequires: MySQL-shared, MySQL-devel %endif %if %{with_pgsql} Requires: postgresql-libs BuildRequires: postgresql-devel %endif %if %{with_sasl} Requires: cyrus-sasl BuildRequires: cyrus-sasl, %{sasl_library} %endif # Postfix compiled with Dovecot support only works with dovecot >= 1 # - however requiring the dovecot rpm to be installed when it may # not be used means that there will be NO explicit dependency # added to the rpm. %if %{with_dovecot} #Requires: dovecot >= 1 NOT REQUIRED / DO NOT ADD %endif %if %{with_tls} Requires: openssl BuildRequires: openssl-devel %endif %description Postfix is a Mail Transport Agent (MTA), intended to be an alternative to the widely-used sendmail. This package includes optional support for LDAP, pcre, mysql, SMTP AUTH (SASL) and TLS. See http://www.redhat.com/support/docs/faqs/RH-postfix-FAQ/book1.html, a slightly outdated FAQ, which covers the steps involved in installing and configuring postfix. The binary and source rpms I produce are currently available at http://postfix.WL0.org, ftp://ftp.WL0.org and the mirrors which can be found at the following URL: http://postfix.WL0.org/en/mirrors/ This package/specfile was built from postfix.spec.in. To see the build options used to build this package see the file %{_sysconfdir}/postfix/postfix.spec.cf To use postfix with alternative options download the source package and rebuild the binary package following the instructions in the source package or on my web page. %prep umask 022 %{die_cmd} # check custom MYSQL path values are sensible to avoid problems # with people mixing include and lib directories if [ "%{mysql_paths}" != 0 ]; then exit_error() { cat <<-EOF ************************************************************************* CUSTOM MYSQL configuration error mysql_paths=%mysql_paths (0=Not used) mysql_local=%mysql_local (0=Not used,1=used) mysql_include=%mysql_include (include directory) mysql_lib=%mysql_lib (lib directory) ERROR: $1 If you don't want to use a custom mysql installation set mysql_paths to 0. ************************************************************************* EOF exit 1 } [ $(echo "%{mysql_paths}" | awk -F: '{ print NF }') = 2 ] || \ exit_error "mysql_paths should be of the form /pathto/mysql/include:/pathto/mysql/lib, with only 2 directories" echo "%{mysql_include}" | grep -q "/lib" && \ exit_error "The first path in mysql_paths appears to be a library path: it should be an include path (e.g. /usr/local/include)" echo "%{mysql_lib}" | grep -q "/include" && \ exit_error "The second path in mysql_paths appears to be an include path: it should be a library path (e.g. /usr/local/lib)" fi # Warn if the distribution this spec file was made for isn't the same as # the current distribution, using a script in the SOURCES directory. # This will be removed and built into the spec file later. distribution=$(sh $(rpm --eval '%{_sourcedir}')/postfix-get-distribution) if [ "${distribution}" != "%{distribution}" ]; then cat <<ENDTEXT ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR This postfix.spec file may not work correctly. It was built for %{distribution}, while you are running ${distribution}. Please rebuild postfix.spec for your distribution by following the instructions in postfix.spec.cf. If this procedure does not allow you to produce a working package, please let me know. ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ENDTEXT exit 1 fi %setup -q -n postfix-%{V_tarball} # Apply obligatory patches %patch3 -p1 -b .alternatives %patch5 -p1 -b .notls # Apply optional patches %if %{with_cdb} %setup -n postfix-%{V_tarball} -D -T -a 12 sh dict_cdb.sh %endif %if %{with_vda} test -e %{_sourcedir}/postfix-%{V_vda}-vda-ng.patch.gz && \ gzip -dc %{_sourcedir}/postfix-%{V_vda}-vda-ng.patch.gz | patch -p1 -b --suffix .vda -s || \ die "POSTFIX RPM: %{_sourcedir}/postfix-%{V_vda}-vda.patch.gz not found or patch failed" %endif %if %{smtpd_multiline_greeting} %patch99 -p1 -b .multiline %endif %if %{with_spf} %patch8 -p1 -b .spf %endif # Modify master.cf: rmail --> rmail.postfix ed conf/master.cf <<EOF || exit 1 H ,s/rmail/rmail.postfix/ w q EOF %build umask 022 CCARGS= AUXLIBS= %ifarch s390 s390x ppc CCARGS="${CCARGS} -fsigned-char" %endif %if %{with_cdb} CCARGS="${CCARGS} -DHAS_CDB" AUXLIBS="${AUXLIBS} -lcdb" %endif %if %{with_ldap} CCARGS="${CCARGS} -DHAS_LDAP" AUXLIBS="${AUXLIBS} -L/usr/%{_lib} -lldap -llber" %endif %if %{with_pcre} # -I option required for pcre 3.4 (and later?) CCARGS="${CCARGS} -DHAS_PCRE -I/usr/include/pcre" AUXLIBS="${AUXLIBS} -lpcre" %else # we need to explicitly disable pcre unless asked for, otherwise it will # be included if present on the build system. This may cause problems. CCARGS="${CCARGS} -DNO_PCRE" %endif # Postfix compiles without needing zlib on RedHat's mysql package, but # requires zlib when using MySQL's package or if using a locally installed # MySQL binary. %if %{with_mysql} || %{with_mysql_redhat} CCARGS="${CCARGS} -DHAS_MYSQL -I/usr/include/mysql" AUXLIBS="${AUXLIBS} -L/usr/%{_lib}/mysql -lmysqlclient -lm" %endif %if %{mysql_local} CCARGS="${CCARGS} -DHAS_MYSQL -I%{mysql_include}" AUXLIBS="${AUXLIBS} -L%{mysql_lib} -lmysqlclient -lm" %endif %if %{with_pgsql} CCARGS="${CCARGS} -DHAS_PGSQL -I/usr/include/pgsql" AUXLIBS="${AUXLIBS} -lpq -lcrypt" %endif %if %{with_sasl} if [ "%{with_sasl}" -le 1 ]; then %define sasl_lib_dir %{_libdir}/sasl CCARGS="${CCARGS} -DUSE_SASL_AUTH -DUSE_CYRUS_SASL" AUXLIBS="${AUXLIBS} -L%{sasl_lib_dir} -lsasl" else %define sasl_lib_dir %{_libdir}/sasl2 CCARGS="${CCARGS} -I/usr/include/sasl -DUSE_SASL_AUTH -DUSE_CYRUS_SASL" AUXLIBS="${AUXLIBS} -L%{sasl_lib_dir} -lsasl2" fi %endif # Provide support for Dovecot SASL %if %{with_dovecot} CCARGS="${CCARGS} -DUSE_SASL_AUTH" # make dovecot the default IFF we don't include SASL if [ "%{with_sasl}" = 0 ]; then CCARGS="${CCARGS} -DDEF_SERVER_SASL_TYPE=\\\"dovecot\\\"" fi %endif %if %{with_spf} AUXLIBS="${AUXLIBS} -lspf2" CCARGS="${CCARGS} -DHAVE_NS_TYPE" %endif %if %{with_tls} # See http://www.openldap.org/lists/openldap-devel/200105/msg00008.html # - rh6.2 needs LIBS=-ldl to build correctly. # - reported by Jauder Ho <jauderho(a)carumba.com> if pkg-config openssl; then CCARGS="${CCARGS} -DUSE_TLS $(pkg-config --cflags openssl)" AUXLIBS="${AUXLIBS} $(pkg-config --libs openssl)" else # # CHECK THIS - these lines may no longer be needed (required for external TLS patch) # [ "%{with_tlsfix}" = 1 ] && LIBS=-ldl [ "%{with_tlsfix}" = 2 ] && CCARGS="${CCARGS} -I/usr/kerberos/include" CCARGS="${CCARGS} -DUSE_TLS -I/usr/include/openssl" AUXLIBS="${AUXLIBS} -lssl -lcrypto" fi %else # explicitly disable TLS otherwise will be built on machine if # openssl is available CCARGS="${CCARGS} -DNO_TLS" %endif # Required by some TLS implementations (RHEL 3 and RH9) and also some MySQL # packages %if %{requires_zlib} AUXLIBS="${AUXLIBS} -lz" %endif export CCARGS AUXLIBS make -f Makefile.init makefiles unset CCARGS AUXLIBS # -Wno-comment needed due to large number of warnings on RHEL5 # suggestion by Eric Hoeve <eric(a)ehoeve.com> make DEBUG="%{?_with_debug:-g}" OPT="$RPM_OPT_FLAGS -Wno-comment" %pre umask 022 # create postfix user and group, and maildrop group if necessary. # Use perl rather than looking in /etc/passwd or /etc/group as this works # in a wider NIS or LDAP environment /usr/bin/getent group postdrop >/dev/null || { %whinge "Adding postdrop group to system" %{_sbindir}/groupadd -r postdrop } /usr/bin/getent group postfix >/dev/null || { %whinge "Adding postfix group to system" %{_sbindir}/groupadd -r postfix } /usr/bin/getent passwd postfix >/dev/null || { %whinge "Adding postfix user to system" %{_sbindir}/useradd -d %{_var}/spool/postfix -s /bin/true -g postfix -G mail -M -r postfix } # Add postfix user to the mail group. This is needed for people using cyrus, # linked by unix sockets (amongst other things). test -z "$(id postfix | awk '{print $3}' | sed -e 's/groups=//' | grep mail)" && { %whinge "Adding postfix user to mail group" %{_sbindir}/usermod -G mail postfix } # check for a new install and see if a non package installed Postfix might # exist. Attempt to avoid overwriting the source config and provide a warning. if [ "$1" = 0 ]; then timenow=$(date +%Y%m%d-%H%M%) pretext="This is a new Postfix RPM installation" [ -f %{_sysconfdir}/postfix ] && { [ -n "$pretext" ] && %whinge "$pretext" && pretext= %whinge "Detected a possible previous non-RPM install in %{_sysconfdir}/postfix." %whinge "- going to move it out of the way to %{_sysconfdir}/postfix.$timenow." mv %{_sysconfdir}/postfix %{_sysconfdir}/postfix.$timenow } [ -d %{initdir}/postfix ] && { [ -n "$pretext" ] && %whinge "$pretext" && pretext= %whinge "Detected a possible previous non-RPM startup script %{initdir}/postfix." %whinge "- going to move it out of the way to %{initdir}/postfix.$timenow." mv %{initdir}/postfix %{initdir}/postfix.$timenow } fi exit 0 %install umask 022 [ -n "${RPM_BUILD_ROOT}" -a "${RPM_BUILD_ROOT}" != "/" ] && { rm -rf ${RPM_BUILD_ROOT} mkdir -p ${RPM_BUILD_ROOT} } %{?!debug:strip -R .comment --strip-unneeded bin/* libexec/*} # rename man pages which may conflict with sendmail's mv man/man1/mailq.1 man/man1/mailq.postfix.1 mv man/man1/newaliases.1 man/man1/newaliases.postfix.1 mv man/man1/sendmail.1 man/man1/sendmail.postfix.1 mv man/man5/aliases.5 man/man5/aliases.postfix.5 # install postfix into build root make non-interactive-package \ install_root=${RPM_BUILD_ROOT} \ config_directory=%{_sysconfdir}/postfix \ daemon_directory=%{_libexecdir}/postfix \ command_directory=%{_sbindir} \ queue_directory=%{_var}/spool/postfix \ sendmail_path=%{sendmail_path} \ newaliases_path=%{newaliases_path} \ mailq_path=%{mailq_path} \ mail_owner=postfix \ setgid_group=postdrop \ html_directory=%{html_dir} \ manpage_directory=%{_mandir} \ readme_directory=%{readme_dir} || exit 1 # To be compatible with later versions of RH sendmail/postfix packages # make /usr/lib/sendmail.postfix point to /usr/sbin/sendmail.postfix. # The alternatives then point /usr/lib/sendmail to /usr/lib/sendmail.postfix. # This *is* all a bit silly ... install -d -m755 $RPM_BUILD_ROOT/usr/lib ln -sf ../sbin/sendmail.postfix $RPM_BUILD_ROOT%{usrlib_sendmail} # RPM compresses man pages automatically. Edit postfix-files to avoid # confusing post-install. ed ${RPM_BUILD_ROOT}%{_libexecdir}/postfix/postfix-files <<EOF || exit 1 H ,s/$\/man[158]\/.*\.[158]$:/\1%{mps}:/ w q EOF # Change alias_maps and alias_database default directory to use # %{_sysconfdir}/postfix bin/postconf -c ${RPM_BUILD_ROOT}%{_sysconfdir}/postfix -e \ "alias_maps = hash:%{_sysconfdir}/postfix/aliases" \ "alias_database = hash:%{_sysconfdir}/postfix/aliases" \ || exit 1 # Change default smtpd_sasl... parameters for dovecot # - override postfix default behaviour IFF not using cyrus sasl. # - main.cf can still be adjusted manually after installation if required. %if %{with_dovecot} if [ "%{with_sasl}" = 0 ]; then bin/postconf -c ${RPM_BUILD_ROOT}%{_sysconfdir}/postfix -e \ "smtpd_sasl_type = dovecot" \ "smtpd_sasl_path = private/auth" \ || exit 1 fi %endif # Fix a typo in some of the documentation. perl -pi -e "s/DEF_SASL_SERVER_TYPE/DEF_SERVER_SASL_TYPE/g" */SASL_README* # Install Sys V init script mkdir -p ${RPM_BUILD_ROOT}%{initdir} install -c %{_sourcedir}/postfix-etc-init.d-postfix \ ${RPM_BUILD_ROOT}%{initdir}/postfix install -c auxiliary/rmail/rmail ${RPM_BUILD_ROOT}%{rmail_path} install -c auxiliary/qshape/qshape.pl ${RPM_BUILD_ROOT}/%{_sbindir}/qshape # copy new aliases files and generate a ghost aliases.db file cp -f %{_sourcedir}/postfix-aliases ${RPM_BUILD_ROOT}%{_sysconfdir}/postfix/aliases chmod 644 ${RPM_BUILD_ROOT}%{_sysconfdir}/postfix/aliases touch ${RPM_BUILD_ROOT}/%{_sysconfdir}/postfix/aliases.db for i in active bounce corrupt defer deferred flush incoming private saved \ hold maildrop public pid; do mkdir -p ${RPM_BUILD_ROOT}%{_var}/spool/postfix/$i done # install qmqp-source, smtp-sink & smtp-source by hand for i in qmqp-source smtp-sink smtp-source; do install -c -m 755 bin/$i ${RPM_BUILD_ROOT}%{_sbindir}/$i done # install postfinger and postfix-chroot.sh scripts # - postfix-chroot.sh is placed in /etc/postfix to make it more visible install -c -m 755 %{_sourcedir}/postfinger-%{V_postfinger} ${RPM_BUILD_ROOT}%{_bindir}/postfinger install -c -m 755 %{_sourcedir}/postfix-chroot.sh ${RPM_BUILD_ROOT}%{_sysconfdir}/postfix/ [ -d "${RPM_BUILD_ROOT}%{html_dir}" ] || mkdir -p ${RPM_BUILD_ROOT}%{html_dir} [ -d "${RPM_BUILD_ROOT}%{readme_dir}" ] || mkdir -p ${RPM_BUILD_ROOT}%{readme_dir} install -c -m 644 %{_sourcedir}/README-Postfix-SASL-RedHat.txt ${RPM_BUILD_ROOT}%{readme_dir}/ [ -d "${RPM_BUILD_ROOT}%{examples_dir}" ] || mkdir -p ${RPM_BUILD_ROOT}%{examples_dir} cp -pr examples/* ${RPM_BUILD_ROOT}%{examples_dir}/ # disable execution permissions to avoid rpm generating dependencies find ${RPM_BUILD_ROOT}%{examples_dir}/ -type f -exec chmod -x {} \; # Install odd documentation files for file in AAAREADME COMPATIBILITY COPYRIGHT HISTORY PORTING \ RELEASE_NOTES RELEASE_NOTES-1.0 RELEASE_NOTES-1.1 \ RELEASE_NOTES-2.0 RELEASE_NOTES-2.1 RELEASE_NOTES-2.2 \ RELEASE_NOTES-2.3 RELEASE_NOTES-2.4 RELEASE_NOTES-2.5 \ RELEASE_NOTES-2.6 RELEASE_NOTES-2.7 RELEASE_NOTES-2.8 \ TLS_ACKNOWLEDGEMENTS TLS_CHANGES TLS_LICENSE \ US_PATENT_6321267 do install -c -m 644 $file ${RPM_BUILD_ROOT}%{docdir}/ done cat <<EOF >${RPM_BUILD_ROOT}%{docdir}/SEE_ALSO %{_docdir}/%{name}-%{version} may contain other documentation files. EOF # Install the smtpd.conf file for SASL support. %if %{with_sasl} mkdir -p ${RPM_BUILD_ROOT}%{sasl_lib_dir} install -m 644 %SOURCE100 ${RPM_BUILD_ROOT}%{sasl_lib_dir}/smtpd.conf mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/pam.d install -m 644 %SOURCE101 ${RPM_BUILD_ROOT}%{_sysconfdir}/pam.d/smtp.postfix mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig install -m 644 %SOURCE102 ${RPM_BUILD_ROOT}%{_sysconfdir}/sysconfig/saslauthd.postfix %endif # Include README.rpm explaining where the documentation can be found and # also pointing out how to get updated copies of my package cat <<EOF > ${RPM_BUILD_ROOT}%{_sysconfdir}/postfix/README.rpm README.rpm ========== Documentation ------------- Postfix documentation should be available in the directory %{docdir}/. The main Postfix web site is http://www.postfix.org. Packages -------- Newer versions of source and standard binary packages may be available from http://ftp.WL0.org or the mirrors listed at http://postfix.WL0.org. Look in the appropriate directory according to your distribution. Chrooting --------- The chroot behaviour of my packages has changed over time. Current packages will NOT turn on the chroot environment in Postfix. Older versions did the opposite. If you upgrade from an older version of my package the chroot behaviour will NOT be changed. (Check %{_sysconfdir}/postfix/master.cf for details.) I have provided a simple script postfix-chroot.sh which attempts to cover most situations and should enable you to disable or enable the chroot on your system with little effort. Package Build Options --------------------- This package can be built on several Linux distributions and with several optional features. %{_sysconfdir}/postfix/postfix.spec.cf contains the information used to build this version of the rpm. It can also be used to build a new rpm with the same options. Enjoy! Simon J Mudd, <sjmudd(a)pobox.com> EOF # generate postfix.spec.cf # - used to build a newer version of the rpm with the same parameters # as the current package. # - provides build instructions cat - %{_sourcedir}/postfix.spec.cf <<EOF | sed -e '/^# NOTE:/d' > ${RPM_BUILD_ROOT}%{_sysconfdir}/postfix/postfix.spec.cf # # This file contains the following information: # # - configuration options used to build the installed postfix rpm # - generated when the binary rpm was built # # - Postfix RPM build instructions # - for upgrading the installed rpm with the same options # - for building the rpm with other options # # 1. CONFIGURATION OPTIONS OF INSTALLED BINARY RPM # # Package built on: %{build_dist_full} (%{build_dist}) POSTFIX_ALT_PRIO=%{with_alt_prio} POSTFIX_CDB=%{with_cdb} POSTFIX_DB=%{requires_db} POSTFIX_DOVECOT=%{with_dovecot} POSTFIX_LDAP=%{with_ldap} POSTFIX_MYSQL=%{with_mysql} POSTFIX_MYSQL_PATHS=%{mysql_paths} POSTFIX_MYSQL_REDHAT=%{with_mysql_redhat} POSTFIX_PCRE=%{with_pcre} POSTFIX_PGSQL=%{with_pgsql} POSTFIX_SASL=%{with_sasl} POSTFIX_SMTPD_MULTILINE_GREETING=%{smtpd_multiline_greeting} POSTFIX_SPF=%{with_spf} POSTFIX_TLS=%{with_tls} POSTFIX_VDA=%{with_vda} # export values to child processes export POSTFIX_MYSQL POSTFIX_MYSQL_PATHS POSTFIX_MYSQL_REDHAT \\ POSTFIX_LDAP POSTFIX_PCRE POSTFIX_PGSQL \\ POSTFIX_SASL POSTFIX_TLS POSTFIX_VDA \\ POSTFIX_SMTPD_MULTILINE_GREETING POSTFIX_DB \\ POSTFIX_INCLUDE_DB POSTFIX_SPF \\ POSTFIX_CDB POSTFIX_ALT_PRIO POSTFIX_DOVECOT # other options used in the build (but not explicitly changeable by the user) are: # - debug=%{?_with_debug:1}%{?!_with_debug:0} # - pcre_requires=%{pcre_requires}, # - requires_zlib=%{requires_zlib}, # - sasl_library=%{sasl_library} # - tlsfix=%{with_tlsfix} # # %{_sysconfdir}/postfix/makedefs.out is also produced by the build and may be of # interest if you are building Postfix by hand. EOF %post umask 022 chkconfig --add postfix # Upgrade configuration as necessary %{_sbindir}/postfix set-permissions upgrade-configuration \ setgid_group=postdrop mail_owner=postfix \ || : %{_sbindir}/postalias %{_sysconfdir}/postfix/aliases %{_sbindir}/postfix check || : # Add submission to services if not found, required for rh <= 7.0 if ! grep -q ^submission %{_sysconfdir}/services then cat <<EOF >>%{_sysconfdir}/services submission 587/tcp msa # mail message submission submission 587/udp msa # mail message submission EOF fi # Add smtps to services if not found if ! grep -q ^smtps %{_sysconfdir}/services then cat <<EOF >>%{_sysconfdir}/services smtps 465/tcp # SMTP over SSL (TLS) EOF fi # If using sasl create %{_sysconfdir}/sysconfig/saslauthd if necessary # - this file is provided in some (but not all) cyrus-sasl packages # - RHEL3 provides this file in cyrus-sasl >= 2.1.18-2 %if %{with_sasl} [ -f %{_sysconfdir}/sysconfig/saslauthd ] || { grep -v "^# NOTE: " %{_sysconfdir}/sysconfig/saslauthd.postfix > %{_sysconfdir}/sysconfig/saslauthd chmod 644 %{_sysconfdir}/sysconfig/saslauthd %{whinge} "creating new %{_sysconfdir}/sysconfig/saslauthd from local Postfix copy" } %endif # Add comments to the /etc/dovecot.conf configuration file if it exists # showing how to configure with Postfix if needed. If postfix is mentioned # in the dovecot configuration file then DO NOTHING. DOVECOT_CONF=/etc/dovecot.conf if [ -f $DOVECOT_CONF ] && ! grep -q postfix $DOVECOT_CONF; then # Check if auth default is configured and add a COMMENTED SECTION # taken from the SASL_README file. if grep -q 'auth default' $DOVECOT_CONF; then ed $DOVECOT_CONF <<-EOF_END || exit 1 /auth default { a # Postfix - suggested configuration taken from SASL_README (2.3.2). # mechanisms = plain login # socket listen { # client { # path = /var/spool/postfix/private/auth # mode = 0660 # user = postfix # group = postfix # } # } . w q EOF_END else # Add the whole section at the end. cat <<-EOF_END >> $DOVECOT_CONF # Postfix - suggested configuration taken from SASL_README (2.3.2). #auth default { # mechanisms = plain login # passdb pam { # } # userdb passwd { # } # socket listen { # client { # path = /var/spool/postfix/private/auth # mode = 0660 # user = postfix # group = postfix # } # } #} EOF_END fi fi # Apply the alternatives scripts ONLY if installing (not upgrading) to # ensure a link exists from %{_sbindir}/sendmail to # %{sendmail_path} (and other files). # # If performing an upgrade this MUST be done in the trigger scripts. # (old postfix packages, pre-alternatives have a /usr/sbin/sendmail and this # gets removed _AFTER_ the %post stage when the old package is removed) [ "$1" = 1 ] || exit 0 # See changelog for explanation of mta-sendmailman entry. %{_sbindir}/alternatives --install %{_sbindir}/sendmail mta %{sendmail_path} %{with_alt_prio} \ --slave %{_bindir}/mailq mta-mailq %{mailq_path} \ --slave %{_bindir}/newaliases mta-newaliases %{newaliases_path} \ --slave %{_bindir}/rmail mta-rmail %{rmail_path} \ --slave /usr/lib/sendmail mta-sendmail %{usrlib_sendmail} \ --slave %{_mandir}/man8/sendmail.8%{mps} mta-sendmailman %{_mandir}/man1/sendmail.postfix.1%{mps} \ --slave %{_mandir}/man1/mailq.1%{mps} mta-mailqman %{_mandir}/man1/mailq.postfix.1%{mps} \ --slave %{_mandir}/man1/newaliases.1%{mps} mta-newaliasesman %{_mandir}/man1/newaliases.postfix.1%{mps} \ --slave %{_mandir}/man5/aliases.5%{mps} mta-aliasesman %{_mandir}/man5/aliases.postfix.5%{mps} \ --initscript postfix exit 0 %triggerpostun -- sendmail # If removing sendmail and not using alternatives: replace with postfix equivalents %whinge "%{V_postfix}-%{rel} triggerpostun -- sendmail: final number of sendmail packages=$2" [ $2 = 0 ] || exit 0 # See changelog for explanation of mta-sendmailman entry. %{_sbindir}/alternatives --install %{_sbindir}/sendmail mta %{sendmail_path} %{with_alt_prio} \ --slave %{_bindir}/mailq mta-mailq %{mailq_path} \ --slave %{_bindir}/newaliases mta-newaliases %{newaliases_path} \ --slave %{_bindir}/rmail mta-rmail %{rmail_path} \ --slave /usr/lib/sendmail mta-sendmail %{usrlib_sendmail} \ --slave %{_mandir}/man8/sendmail.8%{mps} mta-sendmailman %{_mandir}/man1/sendmail.postfix.1%{mps} \ --slave %{_mandir}/man1/mailq.1%{mps} mta-mailqman %{_mandir}/man1/mailq.postfix.1%{mps} \ --slave %{_mandir}/man1/newaliases.1%{mps} mta-newaliasesman %{_mandir}/man1/newaliases.postfix.1%{mps} \ --slave %{_mandir}/man5/aliases.5%{mps} mta-aliasesman %{_mandir}/man5/aliases.postfix.5%{mps} \ --initscript postfix exit 0 # ensure the trigger exit status is 0 %triggerpostun -- postfix # If upgrading postfix some versions are pre-alternatives and use # /usr/sbin/sendmail. After uninstalling the old package this file will be # missing and we need to link to the new postfix sendmail binary. %whinge "%{V_postfix}-%{rel} triggerpostun -- postfix: final number of Postfix packages=$2" [ $2 -gt 0 ] || exit 0 # See changelog for explanation of mta-sendmailman entry. %{_sbindir}/alternatives --install %{_sbindir}/sendmail mta %{sendmail_path} %{with_alt_prio} \ --slave %{_bindir}/mailq mta-mailq %{mailq_path} \ --slave %{_bindir}/newaliases mta-newaliases %{newaliases_path} \ --slave %{_bindir}/rmail mta-rmail %{rmail_path} \ --slave /usr/lib/sendmail mta-sendmail %{usrlib_sendmail} \ --slave %{_mandir}/man8/sendmail.8%{mps} mta-sendmailman %{_mandir}/man1/sendmail.postfix.1%{mps} \ --slave %{_mandir}/man1/mailq.1%{mps} mta-mailqman %{_mandir}/man1/mailq.postfix.1%{mps} \ --slave %{_mandir}/man1/newaliases.1%{mps} mta-newaliasesman %{_mandir}/man1/newaliases.postfix.1%{mps} \ --slave %{_mandir}/man5/aliases.5%{mps} mta-aliasesman %{_mandir}/man5/aliases.postfix.5%{mps} \ --initscript postfix exit 0 # ensure the trigger exit status is 0 %preun umask 022 # remove the directory and depth levels of subdirectories queue_hash_depth_remove () { local dir=$1 local depth=$2 local new_depth local a [ -d "$dir" ] && { if [ "$depth" -gt 0 ]; then new_depth=$(($depth - 1)) for a in 0 1 2 3 4 5 6 7 8 9 A B C D E F; do test -d $dir/$a && queue_hash_depth_remove $dir/$a $new_depth done fi rm -f $dir/* rmdir $dir || %whinge "WARNING: preun - unable to remove directory %{_var}/spool/postfix/$dir" } } # remove the rest of the queue directory structure queue_directory_remove () { # remove the hashed directories depth=$(postconf -h hash_queue_depth) for dir in $(postconf -h hash_queue_names | sed -e 's/,/\n/g; s/ //g'); do queue_hash_depth_remove $dir $depth done # now remove the other directories for dir in corrupt hold maildrop pid private public saved; do queue_hash_depth_remove $dir 0 done } # No more postfix packages left so prepare to finish package removal. # _In theory_ there is no chroot environment now, so there is no need to # clean it out. # However it may be prudent later to add back a call to # /etc/postfix/postfix-chroot.sh disable # just to make sure, but won't do this yet. (If you think I should let # me know). if [ "$1" = 0 ]; then service postfix stop >/dev/null 2>&1 chkconfig --del postfix %{_sbindir}/alternatives --remove mta %{sendmail_path} # userdel also deletes the user's group %{_sbindir}/userdel postfix || %whinge "WARNING: failed to remove user postfix" %{_sbindir}/groupdel postdrop || %whinge "WARNING: failed to remove group postdrop" cd %{_var}/spool/postfix && queue_directory_remove fi exit 0 %postun umask 022 if [ "$1" -ge 1 ]; then service postfix condrestart || : # don't use readlink as this is not available on rh73 mta=`[ -L /etc/alternatives/mta ] && ls -la /etc/alternatives/mta | awk '{ print $11 }'` if [ "$mta" = "%{sendmail_path}" ]; then %{_sbindir}/alternatives --set mta %{sendmail_path} fi fi exit 0 %clean umask 022 [ -n "${RPM_BUILD_ROOT}" -a "${RPM_BUILD_ROOT}" != "/" ] && { rm -rf ${RPM_BUILD_ROOT} } || : %files %defattr(-, root, root) %if %{with_sasl} %config(noreplace) %{sasl_lib_dir}/smtpd.conf %config(noreplace) %{_sysconfdir}/pam.d/smtp.postfix %config(noreplace) %{_sysconfdir}/sysconfig/saslauthd.postfix %endif %verify(not md5 size mtime) %config %dir %{_sysconfdir}/postfix %attr(0644, root, root) %{_sysconfdir}/postfix/LICENSE %attr(0644, root, root) %{_sysconfdir}/postfix/TLS_LICENSE %attr(0444, root, root) %config %{_sysconfdir}/postfix/makedefs.out %attr(0644, root, root) %verify(not md5 size mtime) %config(noreplace) %{_sysconfdir}/postfix/main.cf %attr(0644, root, root) %{_sysconfdir}/postfix/main.cf.default %attr(0644, root, root) %{_sysconfdir}/postfix/bounce.cf.default %attr(0644, root, root) %verify(not md5 size mtime) %config(noreplace) %{_sysconfdir}/postfix/master.cf %attr(0644, root, root) %verify(not md5 size mtime) %config(noreplace) %{_sysconfdir}/postfix/access %attr(0644, root, root) %verify(not md5 size mtime) %config(noreplace) %{_sysconfdir}/postfix/aliases %attr(0644, root, root) %verify(not md5 size mtime) %ghost %{_sysconfdir}/postfix/aliases.db %attr(0644, root, root) %verify(not md5 size mtime) %config(noreplace) %{_sysconfdir}/postfix/canonical %attr(0644, root, root) %verify(not md5 size mtime) %config(noreplace) %{_sysconfdir}/postfix/generic %attr(0644, root, root) %verify(not md5 size mtime) %config(noreplace) %{_sysconfdir}/postfix/header_checks %attr(0644, root, root) %verify(not md5 size mtime) %config(noreplace) %{_sysconfdir}/postfix/relocated %attr(0644, root, root) %verify(not md5 size mtime) %config(noreplace) %{_sysconfdir}/postfix/transport %attr(0644, root, root) %verify(not md5 size mtime) %config(noreplace) %{_sysconfdir}/postfix/virtual %attr(0755, root, root) %config %{_libexecdir}/postfix/postfix-script %attr(0755, root, root) %{_libexecdir}/postfix/postfix-wrapper %attr(0755, root, root) %{_libexecdir}/postfix/postmulti-script %attr(0755, root, root) %config %{_libexecdir}/postfix/post-install %attr(0644, root, root) %{_libexecdir}/postfix/postfix-files %attr(0644, root, root) %{_libexecdir}/postfix/main.cf %attr(0644, root, root) %{_libexecdir}/postfix/master.cf %attr(0755, root, root) %{_libexecdir}/postfix/dnsblog %attr(0755, root, root) %{_libexecdir}/postfix/postscreen %attr(0755, root, root) %{_libexecdir}/postfix/tlsproxy %attr(0644, root, root) %{_sysconfdir}/postfix/README.rpm %attr(0644, root, root) %{_sysconfdir}/postfix/postfix.spec.cf %attr(0755, root, root) %{_sysconfdir}/postfix/postfix-chroot.sh %attr(0755, root, root) %config %{initdir}/postfix %dir %verify(not md5 size mtime) %{_var}/spool/postfix # For correct directory permissions check postfix-install script %dir %attr(0700, postfix, root) %verify(not md5 size mtime) %{_var}/spool/postfix/active %dir %attr(0700, postfix, root) %verify(not md5 size mtime) %{_var}/spool/postfix/bounce %dir %attr(0700, postfix, root) %verify(not md5 size mtime) %{_var}/spool/postfix/corrupt %dir %attr(0700, postfix, root) %verify(not md5 size mtime) %{_var}/spool/postfix/defer %dir %attr(0700, postfix, root) %verify(not md5 size mtime) %{_var}/spool/postfix/deferred %dir %attr(0700, postfix, root) %verify(not md5 size mtime) %{_var}/spool/postfix/flush %dir %attr(0700, postfix, root) %verify(not md5 size mtime) %{_var}/spool/postfix/hold %dir %attr(0700, postfix, root) %verify(not md5 size mtime) %{_var}/spool/postfix/incoming %dir %attr(0700, postfix, root) %verify(not md5 size mtime) %{_var}/spool/postfix/private %dir %attr(0700, postfix, root) %verify(not md5 size mtime) %{_var}/spool/postfix/saved %dir %attr(0730, postfix, postdrop) %verify(not md5 size mtime) %{_var}/spool/postfix/maildrop %dir %attr(0710, postfix, postdrop) %verify(not md5 size mtime) %{_var}/spool/postfix/public %dir %attr(0755, root, root) %verify(not md5 size mtime) %{_var}/spool/postfix/pid %dir %attr(0700, postfix, root) %verify(not md5 size mtime) %{_var}/lib/postfix %doc %{docdir}/AAAREADME %doc %{docdir}/COMPATIBILITY %doc %{docdir}/COPYRIGHT %doc %{docdir}/HISTORY %doc %{docdir}/PORTING %doc %{docdir}/RELEASE_NOTES %doc %{docdir}/RELEASE_NOTES-1.0 %doc %{docdir}/RELEASE_NOTES-1.1 %doc %{docdir}/RELEASE_NOTES-2.0 %doc %{docdir}/RELEASE_NOTES-2.1 %doc %{docdir}/RELEASE_NOTES-2.2 %doc %{docdir}/RELEASE_NOTES-2.3 %doc %{docdir}/RELEASE_NOTES-2.4 %doc %{docdir}/RELEASE_NOTES-2.5 %doc %{docdir}/RELEASE_NOTES-2.6 %doc %{docdir}/RELEASE_NOTES-2.7 %doc %{docdir}/RELEASE_NOTES-2.8 %doc %{docdir}/SEE_ALSO %doc %{docdir}/TLS_ACKNOWLEDGEMENTS %doc %{docdir}/TLS_CHANGES %doc %{docdir}/TLS_LICENSE %doc %{docdir}/US_PATENT_6321267 %doc %dir %{readme_dir} %doc %{readme_dir}/* %doc %dir %{html_dir} %doc %{html_dir}/* %doc %dir %{examples_dir} %doc %dir %{examples_dir}/chroot-setup %dir %dir %{examples_dir}/qmail-local %dir %dir %{examples_dir}/smtpd-policy %doc %{examples_dir}/chroot-setup/* %doc %{examples_dir}/qmail-local/* %doc %{examples_dir}/smtpd-policy/* %dir %attr(0755, root, root) %verify(not md5 size mtime) %{_libexecdir}/postfix %{_libexecdir}/postfix/anvil %{_libexecdir}/postfix/bounce %{_libexecdir}/postfix/cleanup %{_libexecdir}/postfix/discard %{_libexecdir}/postfix/error %{_libexecdir}/postfix/flush %{_libexecdir}/postfix/lmtp %{_libexecdir}/postfix/local %{_libexecdir}/postfix/master %{_libexecdir}/postfix/nqmgr %{_libexecdir}/postfix/oqmgr %{_libexecdir}/postfix/pickup %{_libexecdir}/postfix/pipe %{_libexecdir}/postfix/proxymap %{_libexecdir}/postfix/qmgr %{_libexecdir}/postfix/qmqpd # including as installed by Wietse even with -DNO_TLS ? %{_libexecdir}/postfix/scache %{_libexecdir}/postfix/showq %{_libexecdir}/postfix/smtp %{_libexecdir}/postfix/smtpd %{_libexecdir}/postfix/spawn # including as installed by Wietse even with -DNO_TLS ? %{_libexecdir}/postfix/tlsmgr %{_libexecdir}/postfix/trivial-rewrite %{_libexecdir}/postfix/verify %{_libexecdir}/postfix/virtual %{_sbindir}/postalias %{_sbindir}/postcat %{_sbindir}/postconf %attr(2755,root,postdrop) %{_sbindir}/postdrop %attr(2755,root,postdrop) %{_sbindir}/postqueue %{_sbindir}/postfix %{_sbindir}/postkick %{_sbindir}/postlock %{_sbindir}/postlog %{_sbindir}/postmap %{_sbindir}/postmulti %{_sbindir}/postsuper %{_sbindir}/smtp-sink %{_sbindir}/smtp-source %{_sbindir}/qmqp-source %{sendmail_path} %{mailq_path} %{newaliases_path} %{usrlib_sendmail} %attr(0755, root, root) %{rmail_path} %attr(0755, root, root) %{_bindir}/postfinger %attr(0755, root, root) %{_sbindir}/qshape %{_mandir}/*/* ############################################################################## # List of changes made to this package. # # Although old entries from the changelog have been removed most of them # are available from my CVS repository of changes made to this file. # %changelog * Sun Feb 19 2012 Simon J Mudd <sjmudd(a)pobox.com> 2.9.1-1 - minor tweaks and upgrade to 2.9.1 * Sat Feb 11 2012 Simon J Mudd <sjmudd(a)pobox.com> 2.9.0-1 - initial work on postfix-2.9.0 - pending issues on upgrade from 2.8.8 # chown: cannot access `/usr/share/doc/postfix-2.8.8-documentation/readme/MEMCACHE_README': No such file or directory * Sat Feb 11 2012 Simon J Mudd <sjmudd(a)pobox.com> 2.8.8-1 - upgrade to postfix-2.8.8-1 - previous info removed from here and can be seen in the POSTFIX_2_8 branch ========== Thanks in advance, Tim -- GPG me!! gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B

3 3

your advice on backup procedure
by Bob Hoffman 25 Mar '12

25 Mar '12

Hello all, I am down to my last hurdle of my project, backups. I am thinking of three different ways to go and wanted to ask for input on what you think is the better choice. Not asking for 'how to' but more of 'what is best in your experience' The scenario... centos server acting as a virtual host. Virtual machines are webservers and dns servers. All on one machine, all running centos 6. Virtual machines are kvm, sitting in lvm storage. What I want to do.. auto backups of the virtual machines to be stored on the virtual host's extra drives for later download to my home computer. Many backup solutions and programs seem centered on a network of computers with file sharing. I do not have this and don't think I want to go that way on my host. My three thoughts, not sure which one to pursue... (involves certain folders, /home/ (which includes maildir), /var/www/, /mysqlhotcopys and bin files, and maybe a few more. I can rebuild the comp pretty quick and then restore, or maybe just do one big backup of each server, then work on the folders as a solution) 1- Amanda. I do not know much about it or how it would deal with mysql databases, but it look promising. I do not have a NFS in place on any of the installs. 2- rsnyc - some kind of rsync going from the host to each machine, putting it on the host's backup drives. Adding a mysql hotcopy of some kind on the VMs, along with bin files, saved to a special folder that will then be part of the rsync. Once a week full of both rsync and mysqlcopy, then incremental daily. 3- Use kpartx ? and access the lvm the VM is on to rsync internally on the host, ditto above with the mysql copy/bin setup. Number 3 seems like it is the securest way, but obviously not much info out there on it. Number 2 seems like the 'old way' and will require some real work to get it right number 1 looks good, but do not really know anything about it. Which way would you go, or do you have a different way you like better?

10 13

downloading postfix srpm
by Tim Dunphy 25 Mar '12

25 Mar '12

guys, for some reason this is just eluding me. I need to download a source rpm for postfix as I've done many times in the past. But when I go to the available packages section of the postfix site and click on my architecture this is what I see: http://ftp.wl0.org/official/2.9/RPMS-rhel5-x86_64/ Maybe I'm missing something obvious here? If you needed to download a source rpm for postfix where would you go? thanks tim -- GPG me!! gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B

3 3

CentOS-announce Digest, Vol 85, Issue 12
by centos-announce-request＠centos.org 24 Mar '12

24 Mar '12

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2012:0411 Important CentOS 5 openoffice.org Update (Johnny Hughes) 2. CEEA-2012:0412 CentOS 5 tzdata Update (Johnny Hughes) 3. CEEA-2012:0412 CentOS 6 tzdata Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Fri, 23 Mar 2012 18:34:12 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2012:0411 Important CentOS 5 openoffice.org Update To: centos-announce(a)centos.org Message-ID: <20120323183412.GA14933(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2012:0411 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2012-0411.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: a12b51b7c205752597b75bd0e97de496f7d2f9adef99c09b9823e1341a1aae3f openoffice.org-base-3.1.1-19.10.el5_8.1.i386.rpm cc6dbce7545c381a11a7a6bebf3e57029ab513851f302095ecd91fc63c34dde6 openoffice.org-calc-3.1.1-19.10.el5_8.1.i386.rpm 1097ca94eaec10a29cf2d1eb43c1179cabfa74d54be4518d7e80948ee35795c8 openoffice.org-core-3.1.1-19.10.el5_8.1.i386.rpm c3d8f437a97cdf309351e0abcea6b6451a8af4d0212398e6cee1fbf7b6ccf6e8 openoffice.org-draw-3.1.1-19.10.el5_8.1.i386.rpm 4a69678993e43392660f4fba4bbf5248c1208423d4db392aa23de2e71abae629 openoffice.org-emailmerge-3.1.1-19.10.el5_8.1.i386.rpm 73f7192f3c2dcad74fe5750fec9564a84627dd668f3f7f4a9c5f10e404825afc openoffice.org-graphicfilter-3.1.1-19.10.el5_8.1.i386.rpm 33189cee1d2469fe986264da1675cca01c17cb2089114731476be83086c1ab32 openoffice.org-headless-3.1.1-19.10.el5_8.1.i386.rpm fed3a314a4868300edbe17a753dc25dcad958272e8a47a243e82b65265c42697 openoffice.org-impress-3.1.1-19.10.el5_8.1.i386.rpm 0aa366da4f42f0cb7c5108d8d5c10cd0a9a29dc43fa7f351c7f60f8146b5e52d openoffice.org-javafilter-3.1.1-19.10.el5_8.1.i386.rpm c1a768d994562634b4c05995d11d76f32e790501f22dfacd585d476124d8fddf openoffice.org-langpack-af_ZA-3.1.1-19.10.el5_8.1.i386.rpm 92f815c3f26d7cf847c8f80ba8a854635db8965826689888f255229419317d29 openoffice.org-langpack-ar-3.1.1-19.10.el5_8.1.i386.rpm 3f753de951edde6e60f35818929db96122254dd99dd5a6ad1811253050bf8562 openoffice.org-langpack-as_IN-3.1.1-19.10.el5_8.1.i386.rpm 30c7f32344a905d0260a9d7910c9a8de34f1c79077b4cf8d16b034b93e00a380 openoffice.org-langpack-bg_BG-3.1.1-19.10.el5_8.1.i386.rpm 27c8ae6b3438ca7e205d49ca3f1a4612da1f073d6063b0d812d7f1c7742860ca openoffice.org-langpack-bn-3.1.1-19.10.el5_8.1.i386.rpm fac370fafce306048ea64f1e01b82cd2ed05215d806e29322a1ccc99997d8425 openoffice.org-langpack-ca_ES-3.1.1-19.10.el5_8.1.i386.rpm 26f50dcc94c8bb47c65d37820b38abe209a1a3a2a2a6e60978fa7085fad86805 openoffice.org-langpack-cs_CZ-3.1.1-19.10.el5_8.1.i386.rpm c157caada7b371f887b63f028ae23130a04a0b0adaa6b55503d33ce0904d054f openoffice.org-langpack-cy_GB-3.1.1-19.10.el5_8.1.i386.rpm 395f1e3efbcbef7eeb4025ee9a8c12ba62250995a78b567fd5226a8fbaee5bc3 openoffice.org-langpack-da_DK-3.1.1-19.10.el5_8.1.i386.rpm 0aa4def85a5836f2965164e3512c0db66590e543a8bccf49dd230290ecbb0ab3 openoffice.org-langpack-de-3.1.1-19.10.el5_8.1.i386.rpm 76a395134b47ebfc679e73c6c716b89d74f3d0a99aa6dad13ab954f27ea6c3dc openoffice.org-langpack-el_GR-3.1.1-19.10.el5_8.1.i386.rpm cfb170a724d533d3feb7c6e347d27b9bbe0d436b4600c753299132060773ea0c openoffice.org-langpack-es-3.1.1-19.10.el5_8.1.i386.rpm b8b663e2530f42993451d1b7362343d079aceab2e9ad0440c04d0a7a2ee3a843 openoffice.org-langpack-et_EE-3.1.1-19.10.el5_8.1.i386.rpm 7fc71e08156f57de685bb0816d96ff972fc802756e41dd0da50f7aa3e95e9ce1 openoffice.org-langpack-eu_ES-3.1.1-19.10.el5_8.1.i386.rpm e25a33a242c3ec872070c7aa7bd55f3ae0d3e669527db6b2053b7a8ac53ab5be openoffice.org-langpack-fi_FI-3.1.1-19.10.el5_8.1.i386.rpm 76764a511af7450540bd37e7e87f96c4fbf71fb4ab3e64895c12720a414d5aed openoffice.org-langpack-fr-3.1.1-19.10.el5_8.1.i386.rpm e198b7f801da3f939340b0e3fdb9c5a16db89bdf3cf3101370fa1d151ce904e4 openoffice.org-langpack-ga_IE-3.1.1-19.10.el5_8.1.i386.rpm ec4e9cbd2238bf55c8a2de4119da7f418e7ad34f417ab8727e172f0d043f0b85 openoffice.org-langpack-gl_ES-3.1.1-19.10.el5_8.1.i386.rpm e71ab12efb5d6d711ff796548551ce531a41738ae9db1b5084cce4dadb5e830a openoffice.org-langpack-gu_IN-3.1.1-19.10.el5_8.1.i386.rpm e2d1cea941045a958328256658be6c3ad0f03ef3f706df154bde8679c3d778a7 openoffice.org-langpack-he_IL-3.1.1-19.10.el5_8.1.i386.rpm 2959fe286ada58ff07a8018d6f5b1f1f07e990080c88727e4ffa72b9cb42a6e5 openoffice.org-langpack-hi_IN-3.1.1-19.10.el5_8.1.i386.rpm 79277652c582827d18db7a326b08f3b42b46af44fd06dc818c3c1106296c419a openoffice.org-langpack-hr_HR-3.1.1-19.10.el5_8.1.i386.rpm d35833ad6666c1132fc9a9adf2e0fd0390782b4a136057d58ccdddd21b729500 openoffice.org-langpack-hu_HU-3.1.1-19.10.el5_8.1.i386.rpm 46b4f63e13f6ef55ceca5d85ad35bf0e3c58e84caec7bc18026ca814205b191f openoffice.org-langpack-it-3.1.1-19.10.el5_8.1.i386.rpm 27603bd7339b80580f8a1fe08f46807c092c85ca5a2f9887b49a48dbd21fe4e3 openoffice.org-langpack-ja_JP-3.1.1-19.10.el5_8.1.i386.rpm 8d6d948ebdaab7385f2eb8d483639bdd3b3dc47ee3c3b895809b22908c19eb7f openoffice.org-langpack-kn_IN-3.1.1-19.10.el5_8.1.i386.rpm 423f6bb75778063dec2e2f00d8ed832a2f5612dc3aef111cbdc76902df0b8018 openoffice.org-langpack-ko_KR-3.1.1-19.10.el5_8.1.i386.rpm 80ff58782cc4910b42eeb6b902d9f7c85d4d357430d12665448644ee48003233 openoffice.org-langpack-lt_LT-3.1.1-19.10.el5_8.1.i386.rpm 0f0b2808d2afbe458c5e59b2430d14baffc2af80dcf2dd72a8fce94bd4fe6661 openoffice.org-langpack-ml_IN-3.1.1-19.10.el5_8.1.i386.rpm 10dc5506a503ebf8b690f7902780b4776f6db9ee5f14fe8c1c74e1fb75168531 openoffice.org-langpack-mr_IN-3.1.1-19.10.el5_8.1.i386.rpm 00c06eeb6fcf686578e649869e3e14169cbc859f59de1586f712a0d8dbb47d2e openoffice.org-langpack-ms_MY-3.1.1-19.10.el5_8.1.i386.rpm 42ad8a9fd954d3f39f01ad798a72a716387cef29af840ca0812697038a746695 openoffice.org-langpack-nb_NO-3.1.1-19.10.el5_8.1.i386.rpm cec2a2aee193a8ba7a4d1a46f3fb3dca447d469c2458d9e86ffca831e0d20dcf openoffice.org-langpack-nl-3.1.1-19.10.el5_8.1.i386.rpm 2cf0e90eb148e9496f0df3cf26c8506eef34fbd7238cd6987a72b299f4e8de26 openoffice.org-langpack-nn_NO-3.1.1-19.10.el5_8.1.i386.rpm 303d6299cf4bc7b41867a620ef3bce152f4b0b12e5ebdaab8f8482fec0c6e3d9 openoffice.org-langpack-nr_ZA-3.1.1-19.10.el5_8.1.i386.rpm 0c2f9e5e2ea1037af52bef31dcaac8bac0a95b0715e79907b60ee678ab78a27e openoffice.org-langpack-nso_ZA-3.1.1-19.10.el5_8.1.i386.rpm d3ba955e5b276e57a267d2c06d99f56f2f2283c980fbb5f06ce27212e03df60d openoffice.org-langpack-or_IN-3.1.1-19.10.el5_8.1.i386.rpm bd7067a345e2f20bb996bd682eae9df10786e0f7be10fde33df744e3540a7fc3 openoffice.org-langpack-pa_IN-3.1.1-19.10.el5_8.1.i386.rpm c7f2b39c388da7d983d9f66111f3649b33861eab226cd25838972388b9798368 openoffice.org-langpack-pl_PL-3.1.1-19.10.el5_8.1.i386.rpm b2fc344e4bbc71c5377e5009a4b501021002335ba5c4fae4396ac023388eee3c openoffice.org-langpack-pt_BR-3.1.1-19.10.el5_8.1.i386.rpm a3f4eae0b35f5fbd1c53a94a671fecf1b20b67ed514545154da28b5997523bf9 openoffice.org-langpack-pt_PT-3.1.1-19.10.el5_8.1.i386.rpm 5224e38809d96bf2523153c503ed522d6b2efe5c6b5027e55aaf307768061ac0 openoffice.org-langpack-ru-3.1.1-19.10.el5_8.1.i386.rpm 0b417d8d9debffa97d59f88b6db48462af8d9e0f87fcf8b2e6dd363a4cee11e4 openoffice.org-langpack-sk_SK-3.1.1-19.10.el5_8.1.i386.rpm f4962077fdc4a529bb4a92c109b66ecfe183b73b1704b2947bab01e760714bd6 openoffice.org-langpack-sl_SI-3.1.1-19.10.el5_8.1.i386.rpm ab97ff23197615253920923766c7446878559062c330058b4b8088a67c95af62 openoffice.org-langpack-sr_CS-3.1.1-19.10.el5_8.1.i386.rpm 12f03c53aef241bf19080af8084f7f3d273053546167483bac556bb59f51b56f openoffice.org-langpack-ss_ZA-3.1.1-19.10.el5_8.1.i386.rpm 326f6692b5d85b16de806f1435d2e6ce1a591267e78f7140dbadf90e66b6d28a openoffice.org-langpack-st_ZA-3.1.1-19.10.el5_8.1.i386.rpm 43938a5a428ed5d48aa08a2fd4eb82ef7accd64b80ef5756b5d60d031acc64df openoffice.org-langpack-sv-3.1.1-19.10.el5_8.1.i386.rpm 2f5d45f5dfaa9fdaab69283a90aad7c230f3f1c1ce1fa6dd0fd22b91d1403aa2 openoffice.org-langpack-ta_IN-3.1.1-19.10.el5_8.1.i386.rpm c48b7b7a73cb43794a07681961e29790dde7747c119fe05846eacd69d365d23a openoffice.org-langpack-te_IN-3.1.1-19.10.el5_8.1.i386.rpm 4ee23e20a54763cea1c65a0bc2105cd152a589091b01b5595d71594babc833d9 openoffice.org-langpack-th_TH-3.1.1-19.10.el5_8.1.i386.rpm 2d8ad891ac1cbcdacfbc708f3197eef251ab8899748ad1a44f9c5496539fdb1c openoffice.org-langpack-tn_ZA-3.1.1-19.10.el5_8.1.i386.rpm 3f41d99178c6fc362dea73b6f0d6f42db22b1df0eee5230b8d23d54a993d207e openoffice.org-langpack-tr_TR-3.1.1-19.10.el5_8.1.i386.rpm 72db14b3733add776d0a2abd38ed40bfde7b9d63f083ce6a3998bf38c055d250 openoffice.org-langpack-ts_ZA-3.1.1-19.10.el5_8.1.i386.rpm f9f34d2e5b2b94f7b4a131b6d4b0c1ecccc7ccddb4c067f822bc42bfea2b743b openoffice.org-langpack-ur-3.1.1-19.10.el5_8.1.i386.rpm 77226ba1adccc212013016a92b46388604fab91710633c6065bcbd6e42a426a2 openoffice.org-langpack-ve_ZA-3.1.1-19.10.el5_8.1.i386.rpm fc96b7266a74861b4df64fd71882d943e2fdfc1de7e264a961dbdbe4220c031e openoffice.org-langpack-xh_ZA-3.1.1-19.10.el5_8.1.i386.rpm 91f4b94a1b0bca95f14007421f71392ea6ab8d07a7c18860f5a3b81eb9224d4d openoffice.org-langpack-zh_CN-3.1.1-19.10.el5_8.1.i386.rpm 6c06997c885ebbe4c787a0b15e49e3e14710c450dd1fd7b797aef82645074d43 openoffice.org-langpack-zh_TW-3.1.1-19.10.el5_8.1.i386.rpm 7692eef0d7b4e7a95f31832efdd610ba6d96e0ca928c117bb33d6af08d2b136a openoffice.org-langpack-zu_ZA-3.1.1-19.10.el5_8.1.i386.rpm 56af596d04740e069f2207d23ce4e1a60e27c83f4a1b6472b0f0a51d69590816 openoffice.org-math-3.1.1-19.10.el5_8.1.i386.rpm e92cfe687e69f7a9e61564b5709e7a57e1fef3d8d8a1e6bf35aba14be704662d openoffice.org-pyuno-3.1.1-19.10.el5_8.1.i386.rpm 4a0ef854ad7e8b255e5531a5db6e0cf3413665ba2906097c542f6adbf7eba1d4 openoffice.org-sdk-3.1.1-19.10.el5_8.1.i386.rpm 791f1f886b6894ec0548f68beae5a9bc64e0e3331425c59c924f5f8a798970a6 openoffice.org-sdk-doc-3.1.1-19.10.el5_8.1.i386.rpm d4ef9deb970b765e8e2756bb429e12762936848f0e21c314020c87313dba43d8 openoffice.org-testtools-3.1.1-19.10.el5_8.1.i386.rpm 006aebf954b4cbacf272bd4fd57e5a5f4a022ff3df5f2772303b6d9226206aeb openoffice.org-ure-3.1.1-19.10.el5_8.1.i386.rpm a2720bc89de3809860d789babfc86d4a6ec1830b9df3ca78ace1aae1a35d1b74 openoffice.org-writer-3.1.1-19.10.el5_8.1.i386.rpm 4b0d4d1f3c0ccf8bb98d2382c892e826e711157c5f73c7d5f057c2c70b4930ce openoffice.org-xsltfilter-3.1.1-19.10.el5_8.1.i386.rpm x86_64: 23f55fc423fef1a7750c5821714e2f2c50f610ee4fbb5142ad99c9440c793aa9 openoffice.org-base-3.1.1-19.10.el5_8.1.x86_64.rpm 16fb12523eba8411f55fe29dfdb2baaf44502352a4b16f476daa14dcea22e0a6 openoffice.org-calc-3.1.1-19.10.el5_8.1.x86_64.rpm ae58b933bd9b6cf2dcb962985809ea619a6bd450296b5d6f9efaa6bf99e78e9e openoffice.org-core-3.1.1-19.10.el5_8.1.x86_64.rpm 5aa6db9d299c22d76f0a667a8f7bb52c9a63e57c436d4d407d0efe98ff5a5a5d openoffice.org-draw-3.1.1-19.10.el5_8.1.x86_64.rpm 02c0e7f316f889e2fa39638b58b76640b6b2f6f3beb9e3582fc9177bb0e6fee6 openoffice.org-emailmerge-3.1.1-19.10.el5_8.1.x86_64.rpm 6e5165f1df9ed4840e3c170d68de412505501359a76c3a27df074ecbebbae963 openoffice.org-graphicfilter-3.1.1-19.10.el5_8.1.x86_64.rpm fb9463953d5689889ce5c9eaaf32403c51d2a731db981f16c3cb3934b1dad804 openoffice.org-headless-3.1.1-19.10.el5_8.1.x86_64.rpm 98b5327d667d6a12e41791c441f6b5833ddd64a79aa2a505588b9ec83b291634 openoffice.org-impress-3.1.1-19.10.el5_8.1.x86_64.rpm d3a102c33acc478a003a94192065792ab7caabc3befe4095cc97b4cab2be54ba openoffice.org-javafilter-3.1.1-19.10.el5_8.1.x86_64.rpm b4102b07db24c4b66afe16e93d3e401ba890d5fcaa6689330a56f3bfd33c8349 openoffice.org-langpack-af_ZA-3.1.1-19.10.el5_8.1.x86_64.rpm 9f3e04e7ec2f119c9efcfee781e19f49fda01c7378d43d53cf9c1bc8c6325e5f openoffice.org-langpack-ar-3.1.1-19.10.el5_8.1.x86_64.rpm b12fc9920d2ad78ff558a429a43da6a6b8ab06ef0ea2cddbe8d59417524dcf75 openoffice.org-langpack-as_IN-3.1.1-19.10.el5_8.1.x86_64.rpm 3b14e0ca212980a026fe4308b589b0c4e39c848400a53783031ff83ffe9096d4 openoffice.org-langpack-bg_BG-3.1.1-19.10.el5_8.1.x86_64.rpm 1c4ae752bb11bcdf7ce14ef954589407ea3b4fd380f11477e9cca72aec33be0e openoffice.org-langpack-bn-3.1.1-19.10.el5_8.1.x86_64.rpm da7ff00bf39288e6e1c4b6770f2dbb5c80b3537338ac41836220085ac261b555 openoffice.org-langpack-ca_ES-3.1.1-19.10.el5_8.1.x86_64.rpm 36ae8e9d9657a06cd63e086a612bf6a283bb2b8a7c73ceea7d6e17070df7e94d openoffice.org-langpack-cs_CZ-3.1.1-19.10.el5_8.1.x86_64.rpm 885c0b148b913091aff8acbacbf4454715980da5b8b05e4c095172bc80fe13fc openoffice.org-langpack-cy_GB-3.1.1-19.10.el5_8.1.x86_64.rpm cc4cdfaa757130c54d34a7c7b860339f19c26fc6cf651f162cdb70d672191361 openoffice.org-langpack-da_DK-3.1.1-19.10.el5_8.1.x86_64.rpm 4abd58fa7cadb935ac885fe4251fdef25e6813df7e745af22ec41f7cc4845ee3 openoffice.org-langpack-de-3.1.1-19.10.el5_8.1.x86_64.rpm a6765ed7573da0451a389605ed5d57cda2e4f6525cf1ec72e451101722de9a5c openoffice.org-langpack-el_GR-3.1.1-19.10.el5_8.1.x86_64.rpm 2393dad698600298485c1e036859e856d6c3baaf702eafbf1fb23af23501ca9a openoffice.org-langpack-es-3.1.1-19.10.el5_8.1.x86_64.rpm 9f586ced02886d2e5451bd93d56172ba0849557685ecabf08e5eb8be3b532fdf openoffice.org-langpack-et_EE-3.1.1-19.10.el5_8.1.x86_64.rpm 7c50f9169529e2b1cedf421e4edd9d50b794f067e086b231520cae3119cfa810 openoffice.org-langpack-eu_ES-3.1.1-19.10.el5_8.1.x86_64.rpm 0942971842ba558ff8559b29cd9b35f193bbd8166c0bd407f6603edd715ff9db openoffice.org-langpack-fi_FI-3.1.1-19.10.el5_8.1.x86_64.rpm f255a4502a842243255124563071d0d22f029ac7a96558db112138452d1373d1 openoffice.org-langpack-fr-3.1.1-19.10.el5_8.1.x86_64.rpm f601e19b12fd049475d574c94f441a5d930a861100b3b7abb56612d95e90ffc4 openoffice.org-langpack-ga_IE-3.1.1-19.10.el5_8.1.x86_64.rpm 4811c3fab2f0801084825befa029659fed76936875f3a40ec432cb0bfccb0034 openoffice.org-langpack-gl_ES-3.1.1-19.10.el5_8.1.x86_64.rpm a4cb28cb7e2e6d93abd05de204e5bc542fee1f2930a60b12df8f3b4cd3361b92 openoffice.org-langpack-gu_IN-3.1.1-19.10.el5_8.1.x86_64.rpm 1a05ecb7b95ad8e1a36b8da006aa354627ab4da4faa5de9d6a5f3877a325920a openoffice.org-langpack-he_IL-3.1.1-19.10.el5_8.1.x86_64.rpm 86f005fc00656d50ae7bc11c77ba193931d122593090b7626448c47f49784b50 openoffice.org-langpack-hi_IN-3.1.1-19.10.el5_8.1.x86_64.rpm 319b8226c60ccb7810c04d7f5520328beeec9c122a27ceeec92bae565bbd6feb openoffice.org-langpack-hr_HR-3.1.1-19.10.el5_8.1.x86_64.rpm 9865a777f5c8eb93fe777e076434ae9f7bdc49b59c1117b9190fd38e2a593d8b openoffice.org-langpack-hu_HU-3.1.1-19.10.el5_8.1.x86_64.rpm 98fa3350f7963dfb153a9502ae5669fb808bf2d37f8cd0a174dd37fea2062b3b openoffice.org-langpack-it-3.1.1-19.10.el5_8.1.x86_64.rpm ed7cbf4b9a5eae7b9ccf242e296a6900d79d61a5618c8c19f56eeb9700e430e3 openoffice.org-langpack-ja_JP-3.1.1-19.10.el5_8.1.x86_64.rpm 1a6c57ab73778a37fbda577d08b20a899cdfa9bdbe52cce8d31fe969c229ca22 openoffice.org-langpack-kn_IN-3.1.1-19.10.el5_8.1.x86_64.rpm 30d9987476a1b21c79a5832e3293f31654cf50f27f45fda183a7626e089bc311 openoffice.org-langpack-ko_KR-3.1.1-19.10.el5_8.1.x86_64.rpm 053c669fc34c1825bba8e50198808e7e501868473aa52d6f3334473a6b6b0ce7 openoffice.org-langpack-lt_LT-3.1.1-19.10.el5_8.1.x86_64.rpm b686aac35e0a702ce322fa27d56ac45f879a16b539a98b4d2cf3117c1cb8b305 openoffice.org-langpack-ml_IN-3.1.1-19.10.el5_8.1.x86_64.rpm 927d5d391a1d75e328eeb58a071a0de09ad41a9934c795f4dad036ea199a4baf openoffice.org-langpack-mr_IN-3.1.1-19.10.el5_8.1.x86_64.rpm b05b1c8fb2693a5369e134f58b4c14f050552b5dc27e6f51b6ef1a80a8c80563 openoffice.org-langpack-ms_MY-3.1.1-19.10.el5_8.1.x86_64.rpm 2e72c457a0f45b7da2ea57e53f466329d0ad3d4a1807d4d3a3e7c4f3a26e7c6e openoffice.org-langpack-nb_NO-3.1.1-19.10.el5_8.1.x86_64.rpm 039c682fbc63796b021f4d8152142af125747dfd59885ee895bbedf049ad3875 openoffice.org-langpack-nl-3.1.1-19.10.el5_8.1.x86_64.rpm 6c4849db632bdcb04dfd67642907188653a20aca4e798210ee8d0d561c55363c openoffice.org-langpack-nn_NO-3.1.1-19.10.el5_8.1.x86_64.rpm 667de025d4480c5f6500bcf517d644e5dbfd8c573a7e2b4e67637781b3fe5c9f openoffice.org-langpack-nr_ZA-3.1.1-19.10.el5_8.1.x86_64.rpm 3f51f7136b21571e16e71e270e431a15bcc1179c17e3346df26892cc6bfd033f openoffice.org-langpack-nso_ZA-3.1.1-19.10.el5_8.1.x86_64.rpm a27b35a0407fa728dbd228f53ea9625af9cd509434a73aeb1dcd1c022fe654cc openoffice.org-langpack-or_IN-3.1.1-19.10.el5_8.1.x86_64.rpm 591e05533a8d2fc61dcbd82d27eed4bd75cddb3d520fe80cb87897df45de48fc openoffice.org-langpack-pa_IN-3.1.1-19.10.el5_8.1.x86_64.rpm 7463c387efb221511556343025a8ed1f916aa08eb48f00fe145eee770105e6b0 openoffice.org-langpack-pl_PL-3.1.1-19.10.el5_8.1.x86_64.rpm be8feb68d30027d7f377d5aacf6ed7880656cf48a3682a49c9581cf8a355f2f9 openoffice.org-langpack-pt_BR-3.1.1-19.10.el5_8.1.x86_64.rpm 9de4ca045603bd6ea1d6fe601746b675eb864894610423e8a1e9632944e9c5f7 openoffice.org-langpack-pt_PT-3.1.1-19.10.el5_8.1.x86_64.rpm 26305a5015ebb3c88bee9e450671d6d68d7e972c2f55e666c711f97e6605432e openoffice.org-langpack-ru-3.1.1-19.10.el5_8.1.x86_64.rpm 54279a77740bdc3f20529ab7f32b77ba68d367d392725ccf6b0a9778c6373822 openoffice.org-langpack-sk_SK-3.1.1-19.10.el5_8.1.x86_64.rpm 651a6f7b58710eebcc3706c581311962ced49ff73a6b9f5a7c90aeba73435ef9 openoffice.org-langpack-sl_SI-3.1.1-19.10.el5_8.1.x86_64.rpm dada237b5193f44f27aebd1a9236a1314032f9d9054ab5f8bf0156abf3fe0916 openoffice.org-langpack-sr_CS-3.1.1-19.10.el5_8.1.x86_64.rpm 0490b32fe0ca29e96d356b6cfc0aef21183058d94fe053579e32fa7ad041d306 openoffice.org-langpack-ss_ZA-3.1.1-19.10.el5_8.1.x86_64.rpm 7f33e4eee836191e6dd8d97cac6105ea4ca80c8ce9cd8b6f56b9824ab9041474 openoffice.org-langpack-st_ZA-3.1.1-19.10.el5_8.1.x86_64.rpm ecdf9c66b6bc35de432d8dd0f1e1caab5bcb50c88d221d8db1cbcbcb296e6c17 openoffice.org-langpack-sv-3.1.1-19.10.el5_8.1.x86_64.rpm aa97f39e2cec698f1a2d885e0301c82af170e5e9c76ddfe508e160e62049968e openoffice.org-langpack-ta_IN-3.1.1-19.10.el5_8.1.x86_64.rpm 7451479f2615ed2d74ec5c59bc46ee97a84596ac986319204be40fadebbc6118 openoffice.org-langpack-te_IN-3.1.1-19.10.el5_8.1.x86_64.rpm 8a528bbe25c460b15ac2fb5603755ffc36d5359fc5529e04ffbef927db8afed8 openoffice.org-langpack-th_TH-3.1.1-19.10.el5_8.1.x86_64.rpm f0acbbfd8e70b4062dd180d8b918d45fcc3ccb5734c7fee11891e6ee33bace42 openoffice.org-langpack-tn_ZA-3.1.1-19.10.el5_8.1.x86_64.rpm 6f7eaf4e75b7fdbe15afded17abf5a5b86d49aa1a818591a53925bf41f8163bc openoffice.org-langpack-tr_TR-3.1.1-19.10.el5_8.1.x86_64.rpm 96affab13678c38aa599d3102c863a9abe9b21ea7892099726e53673d2513774 openoffice.org-langpack-ts_ZA-3.1.1-19.10.el5_8.1.x86_64.rpm 07f77787e9fa2dab712abe565b12a8e3964c374d2c7ddd01bb561d8cf29456ed openoffice.org-langpack-ur-3.1.1-19.10.el5_8.1.x86_64.rpm e478927f27d7d6c55676cddb364958e24be7b3414fc6f061580207f8ac392a2a openoffice.org-langpack-ve_ZA-3.1.1-19.10.el5_8.1.x86_64.rpm b564b5f52912ab3d634ee657ad9e4529c2f0c6a30797e897202b8fa6ade09f7b openoffice.org-langpack-xh_ZA-3.1.1-19.10.el5_8.1.x86_64.rpm 458804ac6d23a8d990a6dca49358f4bf67c7d443429092bdcfe4af55d82a3a9d openoffice.org-langpack-zh_CN-3.1.1-19.10.el5_8.1.x86_64.rpm 0c7dd97e6126db07c8ce985c939d67d036177fea6d35364dccda471118e11750 openoffice.org-langpack-zh_TW-3.1.1-19.10.el5_8.1.x86_64.rpm 7b4d2802ef019ab1a4ddaf64a082ffa4720af5ce0c41bdfbecb1aa3bde8b8d29 openoffice.org-langpack-zu_ZA-3.1.1-19.10.el5_8.1.x86_64.rpm 7e2e423a18e002d2d07eadd8bef36a69904e1b91c5aaf6203740168fb0c689b9 openoffice.org-math-3.1.1-19.10.el5_8.1.x86_64.rpm 123c3b09d58b8eab0b6bdef138273de6549730016d5e24334b7a8c129b9f27f8 openoffice.org-pyuno-3.1.1-19.10.el5_8.1.x86_64.rpm 8a814e276cf61994c8bc10141c7d8a8de2027106a1b946b114f306e29b85dc8b openoffice.org-sdk-3.1.1-19.10.el5_8.1.x86_64.rpm ad3bec8f098b0a93a1a1e8d9b519ee71055f605c9cd52cafbfdb360f8c7fc944 openoffice.org-sdk-doc-3.1.1-19.10.el5_8.1.x86_64.rpm f0d27a7e0734b4a765265a5196db0a4993104c9e8776585d2859b3d9ce4ffd8a openoffice.org-testtools-3.1.1-19.10.el5_8.1.x86_64.rpm b41d185ba6ab1fc730be86398c29a56748695d1cf4acbb293882cc774aca13cd openoffice.org-ure-3.1.1-19.10.el5_8.1.x86_64.rpm 27ea0c00f9f4a8f05a4c30556fba5db77f5d02330fd9f4e1da49328566aa2b27 openoffice.org-writer-3.1.1-19.10.el5_8.1.x86_64.rpm 6fdf04c9e09cc4abf8fc0847d8d90e28419814e8522371a65846e2bf25710d65 openoffice.org-xsltfilter-3.1.1-19.10.el5_8.1.x86_64.rpm Source: e025bd136e4ac72034038fb7d2acda665a4e2d8b4715af333baed5f94e05e29a openoffice.org-3.1.1-19.10.el5_8.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Fri, 23 Mar 2012 18:35:51 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEEA-2012:0412 CentOS 5 tzdata Update To: centos-announce(a)centos.org Message-ID: <20120323183551.GA15059(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2012:0412 Upstream details at : https://rhn.redhat.com/errata/RHEA-2012-0412.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 1adf884513a71351d27b10db9d7b2bde62763155515d62e97b82fd4c0e0fd62e tzdata-2012b-3.el5.i386.rpm 46e1f7fc22526a42d8c29b131625849190127d4b9520202823b8be7c438075ad tzdata-java-2012b-3.el5.i386.rpm x86_64: 551eee5a02ab75699cfb0daf6c8955afbc5df3570a4a11895e3aaeb53ea83b68 tzdata-2012b-3.el5.x86_64.rpm 6a37d7f7bf4ed1b5af72a8320cdc66f2b5077fb12b58af4692bc71c3249b6012 tzdata-java-2012b-3.el5.x86_64.rpm Source: e6961422fe622ca5f1af5fa48a078e916258868689d1145a5eb144807fca4660 tzdata-2012b-3.el5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Fri, 23 Mar 2012 18:50:28 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEEA-2012:0412 CentOS 6 tzdata Update To: centos-announce(a)centos.org Message-ID: <20120323185028.GA15291(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2012:0412 Upstream details at : https://rhn.redhat.com/errata/RHEA-2012-0412.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 0f40feb74018edbae1239f756ccb87f8fe733291894db597e822a4551f3f9c60 tzdata-2012b-3.el6.noarch.rpm 22decf9d699ddf49d1e1d1d46b10ca5ed0e43730482888884884559293810fd3 tzdata-java-2012b-3.el6.noarch.rpm x86_64: 0f40feb74018edbae1239f756ccb87f8fe733291894db597e822a4551f3f9c60 tzdata-2012b-3.el6.noarch.rpm 22decf9d699ddf49d1e1d1d46b10ca5ed0e43730482888884884559293810fd3 tzdata-java-2012b-3.el6.noarch.rpm Source: 8c1cf7dff817e64cbe1eca0078b44ce2ba7147be69a1319a12b6cde9658b89c8 tzdata-2012b-3.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 85, Issue 12 ***********************************************

1 0

← Newer
1
2
3
4
5
6
7
8
9
...
20
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss March 2012