Discuss July 2012

discuss@lists.centos.org

166 participants
155 discussions

EXT3-fs (dm-1): error: can't find ext3 filesystem on dev dm-1
by chiong lawrence 25 Jul '12

25 Jul '12

Hello there, I'm a new to linux need help in regards to issues during mounting of a new created logical unit which I am unable to mount the volume due to error as found below: ~]# mount -l -t ext3 /dev/mapper/vgNebula-lvg1 /mnt/iscsi0 mount: wrong fs type, bad option, bad superblock on /dev/mapper/vgNebula-lvg1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so [root@HE ~]# mount -t ext3 /dev/mapper/vgNebula-lvg1 /mnt/iscsi0 mount: wrong fs type, bad option, bad superblock on /dev/mapper/vgNebula-lvg1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so [root@HE ~]# tail /var/log/messages Jul 24 16:31:37 HE kernel: EXT3-fs (dm-1): error: can't find ext3 filesystem on dev dm-1. Jul 24 16:31:43 HE kernel: EXT3-fs (dm-1): error: can't find ext3 filesystem on dev dm-1. Any help is very much appreciated. Thank you. lawrence

2 2

Bind isn't working. after upgrade.
by Carlos Sura 25 Jul '12

25 Jul '12

Hello Mates, I just reciently updated BIND on my CentOS 6.2 (don't remember which version) but now I am using version: BIND version 9.8.2 The packages I have: bind bind-libs bind-chroot bind-utils bind-devel First of all, doing "service named status" it throws me: WARNING: key file (/etc/rndc.key) exists, but using default configuration file (/etc/rndc.conf) rndc: connection to remote host closed This may indicate that * the remote server is using an older version of the command protocol, * this host is not authorized to connect, * the clocks are not synchronized, or * the key is invalid. After a Google search I found: to remove rdnc.key and it was suppose to be working ok. and I chown named:named the file /etc/named.conf, now if I do "service named status" it throws me: version: 9.8.2rc1-RedHat-9.8.2-0.10.rc1.el6_3.1 CPUs found: 4 worker threads: 4 number of zones: 17 debug level: 0 xfers running: 0 xfers deferred: 0 soa queries in progress: 0 query logging is OFF recursive clients: 0/0/1000 tcp clients: 0/100 server is up and running named (pid 1456) is running... The thing is, whenever I want to check the domain name on intoDNS.com service it says: ERROR: One or more of your nameservers did not respond: The ones that did not respond are: and it show boths are bad, I thought may be a delay on propagate, but now I have 2 hours waiting and still nothing. Any help? Here is the /var/log/messages Jul 25 00:17:57domain named[1456]: automatic empty zone: B.E.F.IP6.ARPA Jul 25 00:17:57 domain named[1456]: automatic empty zone: 8.B.D.0.1.0.0.2.IP6.ARPA Jul 25 00:17:57 domain named[1456]: command channel listening on 127.0.0.1#953 Jul 25 00:17:57 domain named[1456]: command channel listening on ::1#953 Jul 25 00:17:57 domain named[1456]: zone domain.info/IN: loaded serial 1343174545 Jul 25 00:17:57domain named[1456]: managed-keys-zone ./IN: loaded serial 3 Jul 25 00:17:57 domain named[1456]: running Jul 25 00:17:57 domain named[1456]: zone domain/IN: sending notifies (serial 1343174545) Jul 25 00:17:57domain xinetd[1494]: xinetd Version 2.3.14 started with libwrap loadavg labeled-networking options compiled in. Jul 25 00:17:57 domainxinetd[1494]: Started working: 0 available services P.S. I've tried removing the packages , reinstalling, stop using chroot, etc. -- Carlos Sura.- www.carlossura.com

2 4

RAID card selection - JBOD mode / Linux RAID
by Alan McKay 25 Jul '12

25 Jul '12

I don't think this is off topic since I want to use JBOD mode so that Linux can do the RAID. I'm going to hopefully run this in CentOS 5 and Ubuntu 12.04 on a Sunfire x2250 Hard to get answers I can trust out of vendors :-) I have a Sun RAID card which I am pretty sure is LSI OEM. It is a 3G/s SAS1 with 2 external connectors like the one on the right here : http://www.cablesondemand.com/images/products/CS-SAS1MUKBCM.jpg And I have 2 x Sun J4400 JBOD cabinets each with 24 disks. If I buy a new card that is 6G/s SAS2 with the same connector, can I connect my cabinets to it and have them work? Even if they only work at 3G/s I don't care. I've also hit an issue with the number of logical devices allowed, and am wondering whether this might be a HW, FW or SW limitation if anyone knows. I want to run everything in JBOD mode and let Linux do the RAID. So for the first cabinet I ran this command 24 times to create a logical drive for each physical one /usr/StorMan/arcconf create 1 logicaldrive max volume 0,X noprompt Where X goes from 0 to 23 Went great, created /dev/sd[c-z] and I was able to use those with mdadm to create 4 x RAID6 arrays and then a big RAID0 out of the 4 x RAID6. Works great! Then I try to connect the 2nd cabinet and when I run the above arcconf command it tells me there are already 24 logical devices, and this is the max. Anyone know whether that is HW, FW or SW? Would a new card fix this problem? Anyone know for sure of a card with above connectors that has a JBOD mode that will support 48 drives and expose them all to Linux? -- “Don't eat anything you've ever seen advertised on TV” - Michael Pollan, author of "In Defense of Food"

4 6

Forum CentOS Indonesia
by Muhammad A. Fatahna 24 Jul '12

24 Jul '12

Dear All, Forum discuss (Indonesia) about CentOS have done, so if you can join this forum you can register on this site http://forum.centos-id.org/ comments and suggestions will be very helpful for the progress this forum :) Thank you very much -- http://mafatahna.web.id

2 2

missing V4L or related dependencies
by Boris Epstein 24 Jul '12

24 Jul '12

Hello all, I am trying to install Epiphan's ( http://www.epiphan.com/ ) VGA2USB device on a Centos 6 machine and when I am trying to compile and install the driver for it I get the following errors: WARNING: /lib/modules/2.6.32-279.2.1.el6.x86_64/extra/vga2usb.ko needs unknown symbol videobuf_streamoff WARNING: /lib/modules/2.6.32-279.2.1.el6.x86_64/extra/vga2usb.ko needs unknown symbol videobuf_poll_stream WARNING: /lib/modules/2.6.32-279.2.1.el6.x86_64/extra/vga2usb.ko needs unknown symbol video_ioctl2 WARNING: /lib/modules/2.6.32-279.2.1.el6.x86_64/extra/vga2usb.ko needs unknown symbol videobuf_reqbufs WARNING: /lib/modules/2.6.32-279.2.1.el6.x86_64/extra/vga2usb.ko needs unknown symbol videobuf_dqbuf WARNING: /lib/modules/2.6.32-279.2.1.el6.x86_64/extra/vga2usb.ko needs unknown symbol videobuf_to_vmalloc WARNING: /lib/modules/2.6.32-279.2.1.el6.x86_64/extra/vga2usb.ko needs unknown symbol videobuf_vmalloc_free WARNING: /lib/modules/2.6.32-279.2.1.el6.x86_64/extra/vga2usb.ko needs unknown symbol video_devdata WARNING: /lib/modules/2.6.32-279.2.1.el6.x86_64/extra/vga2usb.ko needs unknown symbol videobuf_stop WARNING: /lib/modules/2.6.32-279.2.1.el6.x86_64/extra/vga2usb.ko needs unknown symbol videobuf_read_stream WARNING: /lib/modules/2.6.32-279.2.1.el6.x86_64/extra/vga2usb.ko needs unknown symbol videobuf_querybuf WARNING: /lib/modules/2.6.32-279.2.1.el6.x86_64/extra/vga2usb.ko needs unknown symbol video_unregister_device WARNING: /lib/modules/2.6.32-279.2.1.el6.x86_64/extra/vga2usb.ko needs unknown symbol videobuf_qbuf WARNING: /lib/modules/2.6.32-279.2.1.el6.x86_64/extra/vga2usb.ko needs unknown symbol video_register_device WARNING: /lib/modules/2.6.32-279.2.1.el6.x86_64/extra/vga2usb.ko needs unknown symbol videobuf_iolock WARNING: /lib/modules/2.6.32-279.2.1.el6.x86_64/extra/vga2usb.ko needs unknown symbol videobuf_streamon WARNING: /lib/modules/2.6.32-279.2.1.el6.x86_64/extra/vga2usb.ko needs unknown symbol videobuf_queue_vmalloc_init WARNING: /lib/modules/2.6.32-279.2.1.el6.x86_64/extra/vga2usb.ko needs unknown symbol videobuf_mmap_mapper WARNING: /lib/modules/2.6.32-279.2.1.el6.x86_64/extra/vga2usb.ko needs unknown symbol videobuf_mmap_free Does anybody happen to know which library I need to install to get these functions? Thanks. Boris.

2 6

CentOS-announce Digest, Vol 89, Issue 12
by centos-announce-request＠centos.org 24 Jul '12

24 Jul '12

1 0

Fwd: Re: kmod-nvidia?
by m.roth＠5-cent.us 23 Jul '12

23 Jul '12

Date: Fri, 20 Jul 2012 18:37:52 -0400 From: Lamar Owen <lowen(a)pari.edu> On Friday, July 20, 2012 05:30:14 PM m.roth(a)5-cent.us wrote: > Stephen Harris wrote: > > On Fri, Jul 20, 2012 at 04:44:07PM -0400, m.roth(a)5-cent.us wrote: > >> Available Packages > >> kmod-nvidia.x86_64 295.59-1.el6.elrepo > > Yes, and it showed up in your list... > > Or am I missing something? > > Think so. That was from my machine, where it's installed months ago. On > the user's machine, all that shows, regardless of whether I disable all > other repos and enable only elrepo, or if I use all and enable elrepo, all > I see under available packages is nvidia-x11-drv. Sorry if I pasted in > stuff to confuse. Whoa, Mark. Man, you must be tired. The fact that your machine with the 290 driver only sees the kmod-nvidia for 295 and does not see nvidia-x11-drv is a big clue. You might want to double check the includepkgs= line on the machine you originally posted about (not this latest machine), and make sure that it isn't: includepkgs=nvidia-x11-drv I can duplicate this behavior very easily, and can duplicate the reverse behavior as well, by manipulating the includepkgs= line. Here's an example run, from a RHEL 6.3 machine (same would apply to CentOS, just with a few differences in the yum output dealing with the RHN repos....): <MVNCH> Works fine. The includpkgs= line has to include all dependencies, as it really does do what the man page says it does. Try it without the includepkgs= line, or with it commented out, and see if you get different results. Thank you *so* much - this works. One oddity: originally, I'd had only includepkgs=kmod-nvidia, *not* the nvidia-x11-drv. My last try, last week, I'd added extra lines with that on two separate lines: includepkgs=kmod-nvidia includepkgs=nvidia-x11-drv Just now, following your example, I put them on one line includepkgs=nvidia-x11-drv kmod-nvidia and it worked with no problem at all. Odd. And for the guy from the elrepo team, you'll note it was *not* an elrepo problem, which is what I'd suspected, unless the repodata file's changed since Friday. mark

5 9

CentOS-announce Digest, Vol 89, Issue 11
by centos-announce-request＠centos.org 23 Jul '12

23 Jul '12

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2012:1107 CentOS 6 bind Update (Johnny Hughes) 2. CEBA-2012:1106 CentOS 6 net-snmp Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Mon, 23 Jul 2012 12:27:01 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:1107 CentOS 6 bind Update To: centos-announce(a)centos.org Message-ID: <20120723122701.GA5476(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:1107 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-1107.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 79af831ffa40d116718887942c04a14e9ebdd27ea4d9abc63987b0c6b03f18d3 bind-9.8.2-0.10.rc1.el6_3.1.i686.rpm 9b9314de9e26448939b28f8b1d0fabda81e4bb032cc825ddf4f0ccbf968adfa9 bind-chroot-9.8.2-0.10.rc1.el6_3.1.i686.rpm e6e2ad04a9ebcce77c6d51494b829a6a5e43aac9e4228081a6b83f80253fc231 bind-devel-9.8.2-0.10.rc1.el6_3.1.i686.rpm 49d33bc99f94a3dbf45ab4a51f65f56e582135d46205fd3d14379413737400e4 bind-libs-9.8.2-0.10.rc1.el6_3.1.i686.rpm 735d69cbebfe656820dc4871a941cf9549e22bba68a7932f2b5d97a89708e996 bind-sdb-9.8.2-0.10.rc1.el6_3.1.i686.rpm bc6a454988089e994e491c2636ad467d9427cb30496675b6bfe32b613ee3c34b bind-utils-9.8.2-0.10.rc1.el6_3.1.i686.rpm x86_64: a2249aa82302fffad727110b4695877947690d40230834431e887a491512e39c bind-9.8.2-0.10.rc1.el6_3.1.x86_64.rpm f30f07eaf39fa67c16a4cd59e284e37a331ff98890029609ebe9993737a280f1 bind-chroot-9.8.2-0.10.rc1.el6_3.1.x86_64.rpm e6e2ad04a9ebcce77c6d51494b829a6a5e43aac9e4228081a6b83f80253fc231 bind-devel-9.8.2-0.10.rc1.el6_3.1.i686.rpm 2b44d22c9e91eab7090079ab1fbd5ee8cdcca137091ef6eebfd82792f048aab5 bind-devel-9.8.2-0.10.rc1.el6_3.1.x86_64.rpm 49d33bc99f94a3dbf45ab4a51f65f56e582135d46205fd3d14379413737400e4 bind-libs-9.8.2-0.10.rc1.el6_3.1.i686.rpm be1a9287feb0667b3fb77e53e26337528b96560d223ef853fafd92f4c97ef6fc bind-libs-9.8.2-0.10.rc1.el6_3.1.x86_64.rpm 0be79f22920736fc640a1b12e24e90288ab4b9ac5b5d3e4de7451ffc577a4aa1 bind-sdb-9.8.2-0.10.rc1.el6_3.1.x86_64.rpm 68054c9a9f513619bc52715307850e7fb0effbe6cc831bf716cfc69c3df875a3 bind-utils-9.8.2-0.10.rc1.el6_3.1.x86_64.rpm Source: f62b4d0d8a18ece63b1596b3ba3777823fe1f879bbda35329e497d18276bc042 bind-9.8.2-0.10.rc1.el6_3.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Mon, 23 Jul 2012 12:27:22 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:1106 CentOS 6 net-snmp Update To: centos-announce(a)centos.org Message-ID: <20120723122722.GA5582(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:1106 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-1106.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 2def3d36c67cf96f058b78c16502a4ce064ecfb5d39185bbc317c906b3869ff5 net-snmp-5.5-41.el6_3.1.i686.rpm 69af5d5661a34ce41d43e44f195773363820b96e075179be0facb006169e6ef1 net-snmp-devel-5.5-41.el6_3.1.i686.rpm 5237accb6860115976eaf408aa26d8b54f7e1683b936b42d6a64609c8e1b194b net-snmp-libs-5.5-41.el6_3.1.i686.rpm 15e1cdb646b7d3ae21fadc303ebb30694a6594552ec5677c1a49c9c004797357 net-snmp-perl-5.5-41.el6_3.1.i686.rpm 186121b1f2093e08a60f686928900be7e2bba6e880f4271fa70f49f42d9e4f2e net-snmp-python-5.5-41.el6_3.1.i686.rpm 67a8ef1a4256e84d873056b0631eb4bae3a46fe93d0b9b5b55afa1a8496387f3 net-snmp-utils-5.5-41.el6_3.1.i686.rpm x86_64: 3f6a3f0e109d866f41745bb3ecee3d6a3480564db9bcfd740878599314527dc1 net-snmp-5.5-41.el6_3.1.x86_64.rpm 69af5d5661a34ce41d43e44f195773363820b96e075179be0facb006169e6ef1 net-snmp-devel-5.5-41.el6_3.1.i686.rpm 231d24e7d55b28f15354f8eedd7fa33627831e92d217338b33337c818c019a16 net-snmp-devel-5.5-41.el6_3.1.x86_64.rpm 5237accb6860115976eaf408aa26d8b54f7e1683b936b42d6a64609c8e1b194b net-snmp-libs-5.5-41.el6_3.1.i686.rpm ad5d8e8cfddd5a328589ef66c085e0d96211bd0f5c7d49e2a2dd2d960d4b748c net-snmp-libs-5.5-41.el6_3.1.x86_64.rpm d026d9574e88d8981d267916c6a369b0ee6c45ea304577793d7ad58f05aa0bf9 net-snmp-perl-5.5-41.el6_3.1.x86_64.rpm 4bec84e752276e72c058910cdf6bce6f4d25716e0347c80894be34fe481f369a net-snmp-python-5.5-41.el6_3.1.x86_64.rpm 1a396148833824fbcb88c38a322ca91943c6bf3bf9e8ec2d500857cbf0850b50 net-snmp-utils-5.5-41.el6_3.1.x86_64.rpm Source: 0d14d864bbce0659958412b02ea5bf9b474eb579fa1ee277dbad0cf2094ba6f7 net-snmp-5.5-41.el6_3.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 89, Issue 11 ***********************************************

1 0

Re: [CentOS] 'localyum' alias...
by Fabien Archambault 23 Jul '12

23 Jul '12

2012/7/23 Fernando Cassia <fcassia(a)gmail.com>: > On Mon, Jul 23, 2012 at 3:00 AM, Fabien Archambault > <fabien.archambault(a)univ-amu.fr> wrote: >> Since the latest version of yum obsolete the localinstall option, I >> believe that using this alias is useless. > > I have used yum's localinstall option on my CenOS 6.3 box... and it worked... This option is kept for legacy purpose [1] (or man yum). It works yet but will be removed in the future releases (years ago) I believe. [1] http://linux.die.net/man/8/yum > > FC > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos

2 1

n00b rsyslog.conf question - how to separate local syslog from network appliance syslog?
by Rogelio 23 Jul '12

23 Jul '12

I have several network appliances, and I want aggregate their syslog output for later analysis. Eventually I might think about a Splunk box, but for the interim I'm hoping to just build a CentOS 6 syslog server and have it aggregate everything on it for quick review. I installed rsyslog and am looking through the /etc/rsyslog.conf file for what I configure to (a) listen for syslog input from other devices (UDP port 514 is fine), (b) make a log, and (c) log rotate files. (a) I see in there (if I comment it out) # Provides UDP syslog reception $ModLoad imudp $UDPServerRun 514 (Obviously add an iptables rule to let this traffic in) (b) I see options in there, but am not sure how to separate the local logs from the remote logs. Is it something like the following? *.*;local6.none; auth,authpriv.none -/var/log/syslog (c) I understand I can do if I edit /etc/logrotate.d/MyNetworkAppliance.log. This isn't as big of a concern right now. Just trying to figure out how to log things separately. :/ Any suggestions on what I should do to make this work?

2 1

← Newer
1
2
3
4
5
6
7
8
9
...
16
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss July 2012